Это та же операционка, только другая машина
[user1@host-111 ~]$ lsusb
Bus 002 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 1cb6:6672 IdeaCom Technology Inc. IDC 6672
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 002: ID 04f2:b1f3 Chicony Electronics Co., Ltd CNFA213
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0fe6:9702 ICS Advent USB 2.0 10/100M Ethernet Adaptor
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[user1@host-111 ~]$ sudo dmesg
[sudo] password for user1:
[ 0.000000] Linux version 5.15.72-un-def-alt1 (builder@localhost.localdomain) (gcc-10 (GCC) 10.3.1 20210703 (ALT Sisyphus 10.3.1-alt2), GNU ld (GNU Binutils) 2.35.2.20210110) #1 SMP PREEMPT Mon Oct 10 16:11:20 UTC 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/mapper/alt-root ro quiet resume=/dev/disk/by-uuid/73dd731c-a74f-4a97-9d4b-c25bb14066e6 panic=30 splash psi=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffeffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Packard Bell oneTwo L5351/oneTwo L5351, BIOS P01-B0 11/04/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2399.899 MHz processor
....................................................................................вырезал часть сообщения из-за ошибки длинны сообщения
[ 7.444098] systemd[1]: /lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly.
[ 7.498565] systemd[1]: /lib/systemd/system/alteratord.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/alteratord/.socket → /run/alteratord/.socket; please update the unit file accordingly.
[ 7.505618] systemd[1]: Queued start job for default target Graphical Interface.
[ 7.506805] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.507562] systemd[1]: Created slice Slice /system/modprobe.
[ 7.507696] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.507981] systemd[1]: Created slice User and Session Slice.
[ 7.508118] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.508263] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.508367] systemd[1]: Reached target Login Prompts.
[ 7.508431] systemd[1]: Reached target Preparation for Network.
[ 7.508477] systemd[1]: Reached target Remote Encrypted Volumes.
[ 7.508532] systemd[1]: Reached target Slice Units.
[ 7.508596] systemd[1]: Reached target Local Verity Protected Volumes.
[ 7.509749] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 7.509850] systemd[1]: Reached target RPC Port Mapper.
[ 7.509968] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.510224] systemd[1]: Listening on Journal Audit Socket.
[ 7.510379] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.510533] systemd[1]: Listening on Journal Socket.
[ 7.510713] systemd[1]: Listening on udev Control Socket.
[ 7.510861] systemd[1]: Listening on udev Kernel Socket.
[ 7.511008] systemd[1]: Listening on User Database Manager Socket.
[ 7.512346] systemd[1]: Mounting Huge Pages File System...
[ 7.513770] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.515288] systemd[1]: Mounting Kernel Debug File System...
[ 7.516810] systemd[1]: Mounting Kernel Trace File System...
[ 7.518723] systemd[1]: Starting Create List of Static Device Nodes...
[ 7.520399] systemd[1]: Starting Load Kernel Module configfs...
[ 7.522235] systemd[1]: Starting Load Kernel Module dm_mod...
[ 7.523859] systemd[1]: Starting Load Kernel Module drm...
[ 7.525638] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 7.527329] systemd[1]: Starting Load Kernel Module fuse...
[ 7.529007] systemd[1]: Starting Load Kernel Module loop...
[ 7.532591] systemd[1]: Starting RPC Bind...
[ 7.534333] systemd[1]: Starting File System Check on Root Device...
[ 7.536866] systemd[1]: Starting Journal Service...
[ 7.540210] systemd[1]: Starting Load Kernel Modules...
[ 7.542304] fuse: init (API version 7.34)
[ 7.542547] systemd[1]: Starting Coldplug All udev Devices...
[ 7.544309] systemd[1]: Starting Setup Virtual Console...
[ 7.549428] systemd[1]: Mounted Huge Pages File System.
[ 7.549697] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.549975] systemd[1]: Mounted Kernel Debug File System.
[ 7.550192] systemd[1]: Mounted Kernel Trace File System.
[ 7.550628] systemd[1]: Finished Create List of Static Device Nodes.
[ 7.551236] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 7.551616] systemd[1]: Finished Load Kernel Module configfs.
[ 7.552246] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 7.552506] systemd[1]: Finished Load Kernel Module dm_mod.
[ 7.553170] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 7.553445] systemd[1]: Finished Load Kernel Module drm.
[ 7.553992] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 7.554335] systemd[1]: Finished Load Kernel Module efi_pstore.
[ 7.554777] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 7.555008] systemd[1]: Finished Load Kernel Module fuse.
[ 7.555468] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 7.555700] systemd[1]: Finished Load Kernel Module loop.
[ 7.557599] systemd[1]: Mounting FUSE Control File System...
[ 7.561952] systemd[1]: Mounting Kernel Configuration File System...
[ 7.567609] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 7.569925] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.574116] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 7.574430] systemd[1]: Started RPC Bind.
[ 7.575868] systemd[1]: Mounted FUSE Control File System.
[ 7.576314] systemd[1]: Mounted Kernel Configuration File System.
[ 7.577213] ACPI: button: Power Button [PWRB]
[ 7.577355] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.582203] ACPI: button: Power Button [PWRF]
[ 7.601802] systemd[1]: Finished File System Check on Root Device.
[ 7.603504] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.614792] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 7.620328] EXT4-fs (dm-1): re-mounted. Opts: (null). Quota mode: none.
[ 7.622104] systemd[1]: Started Journal Service.
[ 7.645271] systemd-journald[2212]: Received client request to flush runtime journal.
[ 7.688079] vboxdrv: loading out-of-tree module taints kernel.
[ 7.688635] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 7.694573] vboxdrv: Found 4 processor cores
[ 7.710461] vboxdrv: TSC mode is Invariant, tentative frequency 2400000052 Hz
[ 7.710468] vboxdrv: Successfully loaded version 6.1.38 r153438 (interface 0x00320000)
[ 7.714501] VBoxNetFlt: Successfully started.
[ 7.717855] VBoxNetAdp: Successfully started.
[ 8.068319] i2c i2c-8: nForce2 SMBus adapter at 0x4d00
[ 8.068329] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20210730/utaddress-204)
[ 8.068337] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 8.071125] pata_amd 0000:00:06.0: version 0.4.1
[ 8.078425] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 8.078533] nv_tco: Watchdog reboot detected
[ 8.078606] nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[ 8.079142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.080611] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 8.080971] ACPI: \_SB_.LMAC: Enabled at IRQ 22
[ 8.082132] scsi host6: pata_amd
[ 8.084107] ehci-pci: EHCI PCI platform driver
[ 8.084343] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 8.084359] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 8.084371] ehci-pci 0000:00:02.1: debug port 1
[ 8.084422] ehci-pci 0000:00:02.1: irq 22, io mem 0xfde7ec00
[ 8.088873] scsi host7: pata_amd
[ 8.088984] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 8.088988] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 8.091079] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 8.094823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.101319] hub 1-0:1.0: USB hub found
[ 8.101346] hub 1-0:1.0: 6 ports detected
[ 8.101967] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 8.101978] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 8.101988] ehci-pci 0000:00:04.1: debug port 1
[ 8.102053] ehci-pci 0000:00:04.1: irq 20, io mem 0xfde7e800
[ 8.109088] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 8.109139] random: crng init done
[ 8.109145] random: 77 urandom warning(s) missed due to ratelimiting
[ 8.129958] acpi_cpufreq: overriding BIOS provided _PSD data
[ 8.136301] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr f8:0f:41:10:43:3c
[ 8.136312] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 8.137200] hub 2-0:1.0: USB hub found
[ 8.137226] hub 2-0:1.0: 6 ports detected
[ 8.172636] ohci-pci: OHCI PCI platform driver
[ 8.172860] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 8.172878] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 8.172937] ohci-pci 0000:00:02.0: irq 23, io mem 0xfde7f000
[ 8.240672] hub 3-0:1.0: USB hub found
[ 8.240694] hub 3-0:1.0: 6 ports detected
[ 8.268462] ata8: port disabled--ignoring
[ 8.278468] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 8.279390] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 8.279454] ohci-pci 0000:00:04.0: irq 21, io mem 0xfde7d000
[ 8.303936] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.303944] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.334000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.345085] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 8.381495] hub 4-0:1.0: USB hub found
[ 8.381511] hub 4-0:1.0: 6 ports detected
[ 8.435949] ACPI: \_SB_.LAZA: Enabled at IRQ 21
[ 8.435963] snd_hda_intel 0000:00:07.0: Disabling MSI
[ 8.437619] ACPI: \_SB_.LN0B: Enabled at IRQ 16
[ 8.440141] snd_hda_intel 0000:02:00.1: Codec #0 successfully probed, retry count = 0
[ 8.440395] snd_hda_intel 0000:00:07.0: Codec #0 successfully probed, retry count = 0
[ 8.454313] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input5
[ 8.455338] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.514632] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
[ 8.515878] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 8.515887] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[ 8.515890] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.515892] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.515895] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.515897] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 8.515899] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 8.515901] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 8.551698] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[ 8.551780] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[ 8.551837] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 8.551888] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[ 8.551939] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[ 8.552001] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 8.552070] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[ 8.552122] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
[ 8.649607] kvm: Nested Virtualization enabled
[ 8.649614] SVM: kvm: Nested Paging enabled
[ 8.659728] MCE: In-kernel MCE decoding enabled.
[ 8.663140] usb 4-3: new full-speed USB device number 2 using ohci-pci
[ 8.666058] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 8.673916] Adding 8781820k swap on /dev/mapper/alt-swap. Priority:-2 extents:1 across:8781820k SSFS
[ 8.891162] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input7
[ 8.918079] mc: Linux media interface: v0.10
[ 8.931226] usbcore: registered new interface driver usb-storage
[ 8.937235] videodev: Linux video capture interface: v2.00
[ 8.943266] usbcore: registered new interface driver uas
[ 8.951914] ums-realtek 1-6:1.0: USB Mass Storage device detected
[ 8.956237] scsi host8: usb-storage 1-6:1.0
[ 8.956408] usbcore: registered new interface driver ums-realtek
[ 8.963869] hid: raw HID events driver (C) Jiri Kosina
[ 8.966481] usb 1-3: 3:1: cannot get freq at ep 0x84
[ 8.977655] usbcore: registered new interface driver usbhid
[ 8.977661] usbhid: USB HID core driver
[ 8.987238] usbcore: registered new interface driver snd-usb-audio
[ 8.989531] usb 1-3: Found UVC 1.00 device CNFA213 (04f2:b1f3)
[ 8.996681] input: IDEACOM IDC 6672 Touchscreen as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1CB6:6672.0001/input/input16
[ 8.997121] input: IDEACOM IDC 6672 Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1CB6:6672.0001/input/input17
[ 8.997476] hid-generic 0003:1CB6:6672.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [IDEACOM IDC 6672] on usb-0000:00:04.0-3/input0
[ 9.014814] input: CNFA213: USB 2.0 Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input18
[ 9.020499] usbcore: registered new interface driver uvcvideo
[ 9.034580] input: IDEACOM IDC 6672 as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1CB6:6672.0001/input/input19
[ 9.034843] hid-multitouch 0003:1CB6:6672.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [IDEACOM IDC 6672] on usb-0000:00:04.0-3/input0
[ 9.266118] usb 2-6: new high-speed USB device number 3 using ehci-pci
[ 9.699927] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.701995] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.710158] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.712902] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 9.712908] usb 2-6: r8712u: USB_SPEED_HIGH with 4 endpoints
[ 9.713485] usb 2-6: r8712u: Boot from EFUSE: Autoload OK
[ 9.978519] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 9.981293] sd 8:0:0:0: [sdb] Media removed, stopped polling
[ 9.984283] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 10.412884] usb 2-6: r8712u: CustomerID = 0x0000
[ 10.412900] usb 2-6: r8712u: MAC Address from efuse = 68:a3:c4:22:b6:4a
[ 10.412908] usb 2-6: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 10.413559] usbcore: registered new interface driver r8712u
[ 11.203305] forcedeth 0000:00:0a.0 eth0: MSI enabled
[ 11.205512] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.289702] NET: Registered PF_QIPCRTR protocol family
[ 11.928448] r8712u 2-6:1.0 wlan0: 1 RCR=0x153f00e
[ 11.929457] r8712u 2-6:1.0 wlan0: 2 RCR=0x553f00e
[ 14.783456] NET: Registered PF_PACKET protocol family
[ 22.091831] usb 1-3: 3:1: cannot get freq at ep 0x84
[ 23.095072] usb 1-3: 3:1: cannot get freq at ep 0x84
[ 233.948250] usb 3-5: new full-speed USB device number 2 using ohci-pci
[ 234.161423] usb-storage 3-5:1.0: USB Mass Storage device detected
[ 234.161683] scsi host9: usb-storage 3-5:1.0
[ 235.191431] scsi 9:0:0:0: CD-ROM Supereal VR DISK 1.00 PQ: 0 ANSI: 0
[ 235.202456] sr 9:0:0:0: [sr1] scsi3-mmc drive: 126x/126x writer cd/rw xa/form2 tray
[ 235.263023] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 255.522446] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 255.546409] ISO 9660 Extensions: RRIP_1991A
[user1@host-111 ~]$
