Настроил запись логов для x11vnc.
Лог выдает следующее:
05/10/2017 14:03:13 x11vnc version: 0.9.12 lastmod: 2010-09-09 pid: 29186
05/10/2017 14:03:13 Using X display :0
05/10/2017 14:03:13 rootwin: 0xd1 reswin: 0x400001 dpy: 0xa2edd0
05/10/2017 14:03:13
05/10/2017 14:03:13 ------------------ USEFUL INFORMATION ------------------
05/10/2017 14:03:13 X DAMAGE available on display, using it for polling hints.
05/10/2017 14:03:13 To disable this behavior use: '-noxdamage'
05/10/2017 14:03:13
05/10/2017 14:03:13 Most compositing window managers like 'compiz' or 'beryl'
05/10/2017 14:03:13 cause X DAMAGE to fail, and so you may not see any screen
05/10/2017 14:03:13 updates via VNC. Either disable 'compiz' (recommended) or
05/10/2017 14:03:13 supply the x11vnc '-noxdamage' command line option.
05/10/2017 14:03:13
05/10/2017 14:03:13 Wireframing: -wireframe mode is in effect for window moves.
05/10/2017 14:03:13 If this yields undesired behavior (poor response, painting
05/10/2017 14:03:13 errors, etc) it may be disabled:
05/10/2017 14:03:13 - use '-nowf' to disable wireframing completely.
05/10/2017 14:03:13 - use '-nowcr' to disable the Copy Rectangle after the
05/10/2017 14:03:13 moved window is released in the new position.
05/10/2017 14:03:13 Also see the -help entry for tuning parameters.
05/10/2017 14:03:13 You can press 3 Alt_L's (Left "Alt" key) in a row to
05/10/2017 14:03:13 repaint the screen, also see the -fixscreen option for
05/10/2017 14:03:13 periodic repaints.
05/10/2017 14:03:13
05/10/2017 14:03:13 XFIXES available on display, resetting cursor mode
05/10/2017 14:03:13 to: '-cursor most'.
05/10/2017 14:03:13 to disable this behavior use: '-cursor arrow'
05/10/2017 14:03:13 or '-noxfixes'.
05/10/2017 14:03:13 using XFIXES for cursor drawing.
05/10/2017 14:03:13 GrabServer control via XTEST.
05/10/2017 14:03:13
05/10/2017 14:03:13 Scroll Detection: -scrollcopyrect mode is in effect to
05/10/2017 14:03:13 use RECORD extension to try to detect scrolling windows
05/10/2017 14:03:13 (induced by either user keystroke or mouse input).
05/10/2017 14:03:13 If this yields undesired behavior (poor response, painting
05/10/2017 14:03:13 errors, etc) it may be disabled via: '-noscr'
05/10/2017 14:03:13 Also see the -help entry for tuning parameters.
05/10/2017 14:03:13 You can press 3 Alt_L's (Left "Alt" key) in a row to
05/10/2017 14:03:13 repaint the screen, also see the -fixscreen option for
05/10/2017 14:03:13 periodic repaints.
05/10/2017 14:03:13
05/10/2017 14:03:13 XKEYBOARD: number of keysyms per keycode 10 is greater
05/10/2017 14:03:13 than 4 and 99 keysyms are mapped above 4.
05/10/2017 14:03:13 Automatically switching to -xkb mode.
05/10/2017 14:03:13 If this makes the key mapping worse you can
05/10/2017 14:03:13 disable it with the "-noxkb" option.
05/10/2017 14:03:13 Also, remember "-remap DEAD" for accenting characters.
05/10/2017 14:03:13
05/10/2017 14:03:13 X FBPM extension not supported.
05/10/2017 14:03:13 X display is capable of DPMS.
05/10/2017 14:03:13 --------------------------------------------------------
05/10/2017 14:03:13
05/10/2017 14:03:13 Default visual ID: 0x21
05/10/2017 14:03:13 Read initial data from X display into framebuffer.
05/10/2017 14:03:13 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5464
05/10/2017 14:03:13 WARNING: Width (1366) is not a multiple of 4. VncViewer has problems with that.
05/10/2017 14:03:13
05/10/2017 14:03:13 X display :0 is 32bpp depth=24 true color
05/10/2017 14:03:13
05/10/2017 14:03:13 Autoprobing TCP port
05/10/2017 14:03:13 Autoprobing selected port 5900
05/10/2017 14:03:13 Not listening on IPv6 interface.
05/10/2017 14:03:13
05/10/2017 14:03:13 Xinerama is present and active (e.g. multi-head).
05/10/2017 14:03:13 Xinerama: number of sub-screens: 1
05/10/2017 14:03:13 Xinerama: no blackouts needed (only one sub-screen)
05/10/2017 14:03:13
05/10/2017 14:03:13 fb read rate: 1176 MB/sec
05/10/2017 14:03:13 fast read: reset wait ms to: 10
05/10/2017 14:03:13 fast read: reset defer ms to: 10
05/10/2017 14:03:13 The X server says there are 12 mouse buttons.
05/10/2017 14:03:13 screen setup finished.
05/10/2017 14:03:13
The VNC desktop is: comp-pentium-3558u-0c3741:0
******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?
The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval. It should work with any VNC viewer. Try it by running:
x11vnc -ncache 10 ...
One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching
_05/10/2017 14:03:33 Got connection from client 192.168.200.216
05/10/2017 14:03:33 other clients:
05/10/2017 14:03:33 Disabled X server key autorepeat.
05/10/2017 14:03:33 to force back on run: 'xset r on' (3 times)
05/10/2017 14:03:33 incr accepted_client=1 for 192.168.200.216:44356 sock=10
05/10/2017 14:03:33 Client Protocol Version 3.8
05/10/2017 14:03:33 Protocol version sent 3.8, using 3.8
05/10/2017 14:03:33 rfbProcessClientSecurityType: executing handler for type 2
05/10/2017 14:03:34 created xdamage object: 0x40002f
05/10/2017 14:03:34 copy_tiles: allocating first_line at size 44
05/10/2017 14:03:36 Pixel format for client 192.168.200.216:
05/10/2017 14:03:36 32 bpp, depth 24, little endian
05/10/2017 14:03:36 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0
05/10/2017 14:03:36 no translation needed
05/10/2017 14:03:36 Enabling full-color cursor updates for client 192.168.200.216
05/10/2017 14:03:36 Enabling NewFBSize protocol extension for client 192.168.200.216
05/10/2017 14:03:36 rfbProcessClientNormalMessage: ignoring unsupported encoding type Enc(0xFFFFFECC)
05/10/2017 14:03:36 rfbProcessClientNormalMessage: ignoring unsupported encoding type Enc(0xFFFFFECD)
05/10/2017 14:03:36 Enabling LastRect protocol extension for client 192.168.200.216
05/10/2017 14:03:36 rfbProcessClientNormalMessage: ignoring unsupported encoding type Enc(0xFFFFFEC7)
05/10/2017 14:03:36 rfbProcessClientNormalMessage: ignoring unsupported encoding type Enc(0xFFFFFEC8)
05/10/2017 14:03:36 Using image quality level 8 for client 192.168.200.216
05/10/2017 14:03:36 Using tight encoding for client 192.168.200.216
05/10/2017 14:03:36 client_set_net: 192.168.200.216 0.0016
05/10/2017 14:03:43 created selwin: 0x400030
05/10/2017 14:03:43 called initialize_xfixes()
05/10/2017 14:03:43 client 1 network rate 2751.0 KB/sec (18390.9 eff KB/sec)
05/10/2017 14:03:43 client 1 latency: 0.5 ms
05/10/2017 14:03:43 dt1: 0.0023, dt2: 0.0016 dt3: 0.0005 bytes: 10343
05/10/2017 14:03:43 link_rate: LR_LAN - 1 ms, 2751 KB/s
caught XIO error:
05/10/2017 14:03:55 deleted 43 tile_row polling images.
После звездочек начинается подключение и вылетает с ошибкой caught XIO error