X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 27.770] X Protocol Version 11, Revision 0
[ 27.770] Build Operating System: ALT Linux Sisyphus (20081222) i686
[ 27.770] Current Operating System: Linux comp-celeron-cpu-d8743f 3.14.35-std-def-alt1 #1 SMP Mon Mar 9 14:05:43 UTC 2015 i686
[ 27.770] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=9310297a-be10-4dca-b375-ba8451f3e2a2 ro panic=30 quiet splash
[ 27.770] Build Date: 11 February 2015 09:08:55AM
[ 27.770]
[ 27.770] Current version of pixman: 0.32.6
[ 27.770] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.770] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.770] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 24 21:22:41 2015
[ 27.917] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.917] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.321] (==) No Layout section. Using the first Screen section.
[ 28.321] (**) |-->Screen "Screen0" (0)
[ 28.322] (**) | |-->Monitor "Monitor0"
[ 28.322] (**) | |-->Device "Card0"
[ 28.322] (==) Automatically adding devices
[ 28.322] (==) Automatically enabling devices
[ 28.322] (==) Automatically adding GPU devices
[ 28.322] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 28.322] (==) ModulePath set to "/usr/lib/X11/modules"
[ 28.322] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.344] (II) Loader magic: 0x829e700
[ 28.344] (II) Module ABI versions:
[ 28.344] X.Org ANSI C Emulation: 0.4
[ 28.344] X.Org Video Driver: 18.0
[ 28.344] X.Org XInput driver : 21.0
[ 28.344] X.Org Server Extension : 8.0
[ 28.344] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 28.347] (--) PCI:*(0:1:0:0) 10de:0402:1682:4016 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072
[ 28.510] (II) Executed /usr/libexec/X11/drv.d/x11
[ 28.510] (II) LoadModule: "glx"
[ 28.547] (II) Loading /usr/lib/X11/modules/extensions/libglx.so
[ 28.782] (II) Module glx: vendor="X.Org Foundation"
[ 28.782] compiled for 1.16.4, module version = 1.0.0
[ 28.782] ABI class: X.Org Server Extension, version 8.0
[ 28.782] (==) AIGLX enabled
[ 28.782] (II) LoadModule: "nouveau"
[ 28.782] (II) Loading /usr/lib/X11/modules/drivers/nouveau_drv.so
[ 28.807] (II) Module nouveau: vendor="X.Org Foundation"
[ 28.807] compiled for 1.16.1, module version = 1.0.11
[ 28.807] Module class: X.Org Video Driver
[ 28.807] ABI class: X.Org Video Driver, version 18.0
[ 28.807] (II) NOUVEAU driver
[ 28.807] (II) NOUVEAU driver for NVIDIA chipset families :
[ 28.807] RIVA TNT (NV04)
[ 28.807] RIVA TNT2 (NV05)
[ 28.807] GeForce 256 (NV10)
[ 28.807] GeForce 2 (NV11, NV15)
[ 28.807] GeForce 4MX (NV17, NV18)
[ 28.807] GeForce 3 (NV20)
[ 28.807] GeForce 4Ti (NV25, NV28)
[ 28.807] GeForce FX (NV3x)
[ 28.807] GeForce 6 (NV4x)
[ 28.808] GeForce 7 (G7x)
[ 28.808] GeForce 8 (G8x)
[ 28.808] GeForce GTX 200 (NVA0)
[ 28.808] GeForce GTX 400 (NVC0)
[ 28.808] (++) using VT number 1
[ 28.808] (II) [drm] nouveau interface version: 1.1.2
[ 28.809] (II) Loading sub module "dri2"
[ 28.809] (II) LoadModule: "dri2"
[ 28.809] (II) Module "dri2" already built-in
[ 28.809] (--) NOUVEAU(0): Chipset: "NVIDIA NV84"
[ 28.809] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 28.809] (==) NOUVEAU(0): RGB weight 888
[ 28.809] (==) NOUVEAU(0): Default visual is TrueColor
[ 28.809] (==) NOUVEAU(0): Using HW cursor
[ 28.809] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 28.809] (==) NOUVEAU(0): Page flipping enabled
[ 28.809] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 28.809] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 28.810] (II) NOUVEAU(0): Initializing outputs ...
[ 28.848] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
[ 28.888] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[ 28.888] (II) NOUVEAU(0): 2 crtcs needed for screen.
[ 28.933] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 28.933] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 28.964] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 28.964] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 28.964] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28.964] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28.964] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 28.964] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 28.964] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 28.994] (II) NOUVEAU(0): EDID for output DVI-I-2
[ 28.994] (II) NOUVEAU(0): Manufacturer: GSM Model: 4b3e Serial#: 246813
[ 28.994] (II) NOUVEAU(0): Year: 2007 Week: 3
[ 28.994] (II) NOUVEAU(0): EDID Version: 1.3
[ 28.994] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 28.994] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 28.994] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 28.994] (II) NOUVEAU(0): Gamma: 2.20
[ 28.994] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 28.994] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 28.994] (II) NOUVEAU(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 28.994] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 28.994] (II) NOUVEAU(0): Supported established timings:
[ 28.994] (II) NOUVEAU(0): 720x400@70Hz
[ 28.994] (II) NOUVEAU(0): 640x480@60Hz
[ 28.994] (II) NOUVEAU(0): 640x480@75Hz
[ 28.994] (II) NOUVEAU(0): 800x600@60Hz
[ 28.994] (II) NOUVEAU(0): 800x600@75Hz
[ 28.994] (II) NOUVEAU(0): 832x624@75Hz
[ 28.994] (II) NOUVEAU(0): 1024x768@60Hz
[ 28.994] (II) NOUVEAU(0): 1024x768@75Hz
[ 28.994] (II) NOUVEAU(0): 1280x1024@75Hz
[ 28.994] (II) NOUVEAU(0): 1152x864@75Hz
[ 28.994] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 28.994] (II) NOUVEAU(0): Supported standard timings:
[ 28.994] (II) NOUVEAU(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 28.994] (II) NOUVEAU(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 28.994] (II) NOUVEAU(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 28.994] (II) NOUVEAU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 28.994] (II) NOUVEAU(0): Supported detailed timing:
[ 28.994] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 28.995] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 28.995] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 28.995] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 28.995] (II) NOUVEAU(0): Monitor name: L1953S
[ 28.995] (II) NOUVEAU(0): Monitor name:
[ 28.995] (II) NOUVEAU(0): EDID (in hex):
[ 28.995] (II) NOUVEAU(0): 00ffffffffffff001e6d3e4b1dc40300
[ 28.995] (II) NOUVEAU(0): 031101036a261e78eaa2a5a3574c9d25
[ 28.995] (II) NOUVEAU(0): 115054a56b80314f454f614f81800101
[ 28.995] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 28.995] (II) NOUVEAU(0): 1300782d1100001e000000fd00384b1e
[ 28.995] (II) NOUVEAU(0): 530e000a202020202020000000fc004c
[ 28.995] (II) NOUVEAU(0): 31393533530a202020202020000000fc
[ 28.995] (II) NOUVEAU(0): 000a20202020202020202020202000cb
[ 28.995] (II) NOUVEAU(0): Printing probed modes for output DVI-I-2
[ 28.995] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP)
[ 28.995] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 28.995] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 28.995] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 28.995] (II) NOUVEAU(0): Output DVI-I-2 connected
[ 28.995] (II) NOUVEAU(0): Using user preference for initial modes
[ 28.995] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768
[ 28.995] (II) NOUVEAU(0): Output DVI-I-2 using initial mode 1280x1024
[ 28.995] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 28.995] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 28.995] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 29.000] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.000] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 29.000] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.000] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 29.000] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 29.000] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 29.000] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 29.000] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 29.000] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 29.000] (==) NOUVEAU(0): DPI set to (96, 96)
[ 29.000] (II) Loading sub module "fb"
[ 29.000] (II) LoadModule: "fb"
[ 29.000] (II) Loading /usr/lib/X11/modules/libfb.so
[ 29.011] (II) Module fb: vendor="X.Org Foundation"
[ 29.011] compiled for 1.16.4, module version = 1.0.0
[ 29.011] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.011] (II) Loading sub module "shadowfb"
[ 29.011] (II) LoadModule: "shadowfb"
[ 29.011] (II) Loading /usr/lib/X11/modules/libshadowfb.so
[ 29.019] (II) Module shadowfb: vendor="X.Org Foundation"
[ 29.019] compiled for 1.16.4, module version = 1.0.0
[ 29.019] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.019] (--) Depth 24 pixmap format is 32 bpp
[ 29.046] (II) NOUVEAU(0): Channel setup complete.
[ 29.052] (EE) NOUVEAU(0): [COPY] failed to allocate class.
[ 29.063] (II) NOUVEAU(0): [DRI2] Setup complete
[ 29.063] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 29.063] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 29.089] (II) Loading sub module "exa"
[ 29.089] (II) LoadModule: "exa"
[ 29.089] (II) Loading /usr/lib/X11/modules/libexa.so
[ 29.099] (II) Module exa: vendor="X.Org Foundation"
[ 29.099] compiled for 1.16.4, module version = 2.6.0
[ 29.099] ABI class: X.Org Video Driver, version 18.0
[ 29.100] (II) EXA(0): Driver allocated offscreen pixmaps
[ 29.100] (II) EXA(0): Driver registered support for the following operations:
[ 29.100] (II) Solid
[ 29.100] (II) Copy
[ 29.100] (II) Composite (RENDER acceleration)
[ 29.100] (II) UploadToScreen
[ 29.100] (II) DownloadFromScreen
[ 29.100] (==) NOUVEAU(0): Backing store enabled
[ 29.100] (==) NOUVEAU(0): Silken mouse enabled
[ 29.107] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 29.107] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 29.107] (==) NOUVEAU(0): DPMS enabled
[ 29.107] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 29.108] (--) RandR disabled
[ 29.145] (II) SELinux: Disabled on system
[ 29.578] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 29.578] (II) AIGLX: enabled GLX_ARB_create_context
[ 29.578] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 29.578] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 29.578] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 29.578] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 29.578] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 29.578] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 29.578] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 29.579] (II) AIGLX: Loaded and initialized nouveau
[ 29.579] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 29.581] (II) NOUVEAU(0): NVEnterVT is called.
[ 29.634] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 29.634] resize called 1280 1024
[ 29.957] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 29.957] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.957] (**) Power Button: Applying InputClass "keyboard"
[ 29.957] (II) LoadModule: "evdev"
[ 29.958] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so
[ 29.985] (II) Module evdev: vendor="X.Org Foundation"
[ 29.985] compiled for 1.16.2.901, module version = 2.9.1
[ 29.985] Module class: X.Org XInput Driver
[ 29.985] ABI class: X.Org XInput driver, version 21.0
[ 29.985] (II) Using input driver 'evdev' for 'Power Button'
[ 29.985] (**) Power Button: always reports core events
[ 29.985] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 29.986] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.986] (--) evdev: Power Button: Found keys
[ 29.986] (II) evdev: Power Button: Configuring as keyboard
[ 29.986] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 29.986] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.986] (**) Option "xkb_rules" "evdev"
[ 29.986] (**) Option "xkb_model" "pc104"
[ 29.986] (**) Option "xkb_layout" "us"
[ 30.040] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.040] (**) Power Button: Applying InputClass "keyboard"
[ 30.040] (II) Using input driver 'evdev' for 'Power Button'
[ 30.040] (**) Power Button: always reports core events
[ 30.040] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 30.040] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.040] (--) evdev: Power Button: Found keys
[ 30.040] (II) evdev: Power Button: Configuring as keyboard
[ 30.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 30.040] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 30.040] (**) Option "xkb_rules" "evdev"
[ 30.040] (**) Option "xkb_model" "pc104"
[ 30.041] (**) Option "xkb_layout" "us"
[ 30.042] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.042] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.042] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 30.042] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.042] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.042] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.043] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.043] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.043] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.043] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.043] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 30.043] (**) Option "xkb_rules" "evdev"
[ 30.043] (**) Option "xkb_model" "pc104"
[ 30.043] (**) Option "xkb_layout" "us"
[ 30.048] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4)
[ 30.048] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 30.048] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 30.048] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 30.048] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
[ 30.049] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 30.049] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 30.049] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 30.049] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 30.049] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 30.049] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 30.049] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 30.049] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 30.049] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.049] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[ 30.049] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 9)
[ 30.049] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 30.049] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 30.049] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 30.049] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 30.049] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 30.050] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 30.050] (II) No input driver specified, ignoring this device.
[ 30.050] (II) This device may have been added with another device file.
[ 30.051] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 30.051] (II) No input driver specified, ignoring this device.
[ 30.051] (II) This device may have been added with another device file.
[ 43.085] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 43.085] (II) NOUVEAU(0): NVLeaveVT is called.
Вот файл Xorg.0.log