После обновления до p7 перестал работать owfs [как бы решено]

[zyl]

Всем привет.
После обновления с p6 до p7 перестала монтироваться сеть 1-wire.
Прошу подсказать, как это исправить.

# owfs -d /dev/ttyS1 -m /mnt/1-wire/ --error_level=5
зависает следующим образом:

Спойлер

CONNECT: owfs.c:main(123) fuse mount point: /mnt/1-wire/
CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support. Library libavahi-client couldn't be loaded
CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is disabled since dnssd library isn't found
   CALL: ow_parsename.c:FS_ParsedName_anywhere(95) path=[]
  DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C (for simulated adapters)
  DEBUG: ow_ds9097U.c:DS2480_initialize_repeatedly(265) Attempt #0 to initialize the DS9097U
  DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(354) Send the initial reset to the bus master.
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_write(416) wrong response (85 not 44)
  DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(354) Send the initial reset to the bus master.
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second attempt at resetting baud rate of bus master /dev/ttyS1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
  DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
  DEBUG: ow_ds9097U.c:DS2480_configuration_write(416) wrong response (85 not 44)

Явное указание скорости, соответствующее настройкам порта - не помогает.
В то же время digitemp как и раньше прекрасно все видит:

Код: [Выделить]

# digitemp_DS9097 -q -s /dev/ttyS1 -w
103AE58002080031 : DS1820/DS18S20/DS1920 Temperature Sensor
10B9BA8002080078 : DS1820/DS18S20/DS1920 Temperature Sensor
10ADCE800208008D : DS1820/DS18S20/DS1920 Temperature Sensor
282B3BBF04000031 : DS18B20 Temperature Sensor


[ruslandh]

1. Не установлены библиотеки:
 Library libavahi-client couldn't be loaded
 dnssd library isn't found
2, Не синхронизировано время?
 DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds

[ruslandh]

apt-cache search  libavahi-client
libavahi - Libraries for avahi

[zyl]

Код: [Выделить]

# apt-get install libavahi
Reading Package Lists... Done
Building Dependency Tree... Done
libavahi is already the newest version.
0 upgraded, 0 newly installed, 0 removed and 0 not upgraded.

2. Зачем COM-порту синхронизированное время?
Проблема, как я понимаю, в следующем:

Код: [Выделить]

DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt at resetting baud rate of bus master /dev/ttyS1
<skip>
  DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F not 00)
  DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second attempt at resetting baud rate of bus master А как с этим бороться - вопрос.

[zyl]

Откат к версии из p6 возвращает работоспособность.
Версия из p7 на контроллере с http://xgu.ru/wiki/1wire не заработала.