Автор Тема: p8 SL-fix Vga output Resolution  (Прочитано 41021 раз)

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
p8 SL-fix Vga output Resolution
« : 22.09.2019 13:47:51 »
hello !!!
i install p8  SL  to another laptop ,at first all good...
but the monitor of laptop is not good and  I decided to connect it to my monitor screen from  vga output.. 
at first everything was fine ,reading the screen resolution normally ,of my monitor 1280x1024 ...
but  after a few months maybe ,he suddenly stopped seeing this analysis and appear only 1024x768 ..... i reinstall linux but nothing ... i install windows  ,and result is same , do you know what is happen?

Оффлайн klark973

  • Давно тут
  • **
  • Сообщений: 653
  • Неспящий саппорт
Re: p8 SL-fix Vga output Resolution
« Ответ #1 : 22.09.2019 14:10:16 »
Check VGA/D-SUB connector pins #4, #15, #12, #11 (#15 may be absent).
To moan or to solve -- that is the question!

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #2 : 22.09.2019 17:47:56 »
Check VGA/D-SUB connector pins #4, #15, #12, #11 (#15 may be absent).
i change cable  but the result is same  :-(

i try manual to change   , to create  a resolution on panel (photo) , this work, but not always ...because i must to save  on session.......   but is not good  ,,  i do not like this solution ....

user/share/x11/xorg.conf.d/10-monitor.conf
Section "Monitor"
  Identifier "LVDS-1"
  Option  "LeftOf" "VGA-1"
EndSection

Section "Monitor"
  Identifier "VGA-1"
  Modeline "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
  Option  "PreferredMode"  "1280x1024_60.00"
  Option  "RightOf" "LVDS-1"
  Option  "Position" "1280 0"
  EndSection

 Section "Screen"
    Identifier "default Screen Section"
    SubSection "Display"
        Virtual   2560 1024
    EndSubSection
EndSection

ΥΓ:PS:I found this solution on internet--
used information the monitor it works very well on the other laptop
« Последнее редактирование: 22.09.2019 18:06:39 от Δημητριος »

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #3 : 22.09.2019 18:47:43 »
Finally in the windows work-fix- i update drive nvidia and now work  :-)
now in alt what can i do !!!!
my graphick card
$ lspci -vnn | grep VGA -A 12
05:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [GeForce 8400M GS] [10de:0427] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Pavilion dv9668eg Laptop [103c:30cf]
Flags: bus master, fast devsel, latency 0, IRQ 28, NUMA node 0
Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at 4000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau

07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Pavilion dv9668eg Laptop

Оффлайн klark973

  • Давно тут
  • **
  • Сообщений: 653
  • Неспящий саппорт
Re: p8 SL-fix Vga output Resolution
« Ответ #4 : 23.09.2019 12:26:12 »
On Simply Linux now work properly too, solved?
To moan or to solve -- that is the question!

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #5 : 23.09.2019 15:23:06 »
 
On Simply Linux now work properly too, solved?
does not display the correct resolution 1280x1204.... like photo  :-( the maximum is 1024 x768 ...why is he doing that,I do not understand it .....
« Последнее редактирование: 23.09.2019 15:27:13 от Δημητριος »

Оффлайн klark973

  • Давно тут
  • **
  • Сообщений: 653
  • Неспящий саппорт
Re: p8 SL-fix Vga output Resolution
« Ответ #6 : 23.09.2019 15:39:35 »
Try blacklist nouveau module, replace to nvidia module, remove manual xorg config /etc/X11/xorg.conf.d/10-monitor.conf. Add Option "UseEDIDDpi" "False" or Option "UseEDID" "False" after this steps aslo made helps.
To moan or to solve -- that is the question!

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #7 : 23.09.2019 15:50:00 »
Try blacklist nouveau module, replace to nvidia module, remove manual xorg config /etc/X11/xorg.conf.d/10-monitor.conf. Add Option "UseEDIDDpi" "False" or Option "UseEDID" "False" after this steps aslo made helps.
i reinstall again SL
and not exist this file 10-monitor.conf
now i must create new text with this name UseEDIDDpi ??? ??

ΥΓ:SP: text=document medit
« Последнее редактирование: 23.09.2019 15:56:58 от Δημητριος »

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #8 : 23.09.2019 16:26:59 »
Try blacklist nouveau module, replace to nvidia
you can become a little more specific?? because this is  two different processes !!!
blacklist nouveauУстанавливаем в оба ядра модули nvidia и nouveau.
    Создаём файл /etc/modprobe.d/blacklist-nvidia-x11.conf и записываем туда:

blacklist nvidia
blacklist nouveau

    Удаляем, если есть в файлах конфигурации все упоминания о том, какой драйвер применяется - nvidia или nouveau [1]

    Создаём файл /etc/rc.d/rc.local следующего содержания:

#!/bin/bash


if [ -n `uname -r | grep std-def` ];then
    modprobe nvidia
else
    modprobe nouveau
fi

and Add Option "UseEDIDDpi" "False" or Option "UseEDID" "False"where will I add it???

Оффлайн klark973

  • Давно тут
  • **
  • Сообщений: 653
  • Неспящий саппорт
Re: p8 SL-fix Vga output Resolution
« Ответ #9 : 23.09.2019 16:31:30 »
and not exist this file 10-monitor.conf
Yes, by default, this file not created, but you self create this or similar file (see above). You need to check all manual created Xorg configuration in the /etc/X11/xorg.conf*.

now i must create new text with this name UseEDIDDpi?
This is optional, only if previous steps not helps. Inside the section "Device" which cretated manually (with driver "nvidia" or "nv", need to install it).
To moan or to solve -- that is the question!

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #10 : 23.09.2019 16:50:29 »
I followed this and restarted the computer ... what am i doing now ???
Устанавливаем в оба ядра модули nvidia и nouveau.
    Создаём файл /etc/modprobe.d/blacklist-nvidia-x11.conf и записываем туда:

blacklist nvidia
blacklist nouveau

    Удаляем, если есть в файлах конфигурации все упоминания о том, какой драйвер применяется - nvidia или nouveau [1]

    Создаём файл /etc/rc.d/rc.local следующего содержания:

#!/bin/bash


if [ -n `uname -r | grep std-def` ];then
    modprobe nvidia
else
    modprobe nouveau
« Последнее редактирование: 23.09.2019 16:53:09 от Δημητριος »

Оффлайн klark973

  • Давно тут
  • **
  • Сообщений: 653
  • Неспящий саппорт
Re: p8 SL-fix Vga output Resolution
« Ответ #11 : 23.09.2019 21:02:04 »
1) You need have installed nvidia_glx_common package.
2) Create file: echo 'blacklist nouveau' > /etc/modprobe.d/nouveau-blacklist.conf
3) Run nvidia-install-driver as root. Then reboot.

This is valid for current std-def and un-def kernels. After install NVIDIA, kernel-modules-nvidia-std-def or kernel-modules-nvidia-un-def modules will be installed and added to the initrd for bootsplash/framebuffer support. Also will be installed nvidia_glx_3* package with supplimental libraries (Xorg and OpenGL).
« Последнее редактирование: 23.09.2019 21:03:36 от klark973 »
To moan or to solve -- that is the question!

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #12 : 24.09.2019 01:21:07 »

3) Run nvidia-install-driver as root. Then reboot.
apt-get install nvidia_glx_common
Reading Package Lists... Done
Building Dependency Tree... Done
nvidia_glx_common is already the newest version.
0 upgraded, 0 newly installed, 0 removed and 0 not upgraded.

nvidia-install-driver
Get:1 http://ftp.altlinux.org p8/branch/x86_64 release [880B]
Get:2 http://ftp.altlinux.org p8/branch/x86_64-i586 release [537B]
Get:3 http://ftp.altlinux.org p8/branch/noarch release [673B]
Fetched 2090B in 0s (5105B/s)               
Hit http://ftp.altlinux.org p8/branch/x86_64/classic pkglist
Hit http://ftp.altlinux.org p8/branch/x86_64/classic release
Hit http://ftp.altlinux.org p8/branch/x86_64-i586/classic pkglist
Hit http://ftp.altlinux.org p8/branch/x86_64-i586/classic release
Hit http://ftp.altlinux.org p8/branch/noarch/classic pkglist
Hit http://ftp.altlinux.org p8/branch/noarch/classic release
Reading Package Lists... Done
Building Dependency Tree... Done
Reading Package Lists... Done
Building Dependency Tree... Done
/usr/bin/nvidia-install-driver: line 11: x11presetdrv: command not found
/usr/bin/nvidia-install-driver: line 12: ldconfig: command not found

apt-get install x11presetdrv
Reading Package Lists... Done
Building Dependency Tree... Done
x11presetdrv is already the newest version.
.
« Последнее редактирование: 24.09.2019 15:29:09 от Δημητριος »

Оффлайн Δημητριος

  • Давно тут
  • **
  • Сообщений: 258
Re: p8 SL-fix Vga output Resolution
« Ответ #13 : 24.09.2019 15:29:28 »

3) Run nvidia-install-driver as root. Then reboot.
apt-get install nvidia_glx_common
Reading Package Lists... Done
Building Dependency Tree... Done
nvidia_glx_common is already the newest version.
0 upgraded, 0 newly installed, 0 removed and 0 not upgraded.

nvidia-install-driver
Get:1 http://ftp.altlinux.org p8/branch/x86_64 release [880B]
Get:2 http://ftp.altlinux.org p8/branch/x86_64-i586 release [537B]
Get:3 http://ftp.altlinux.org p8/branch/noarch release [673B]
Fetched 2090B in 0s (5105B/s)               
Hit http://ftp.altlinux.org p8/branch/x86_64/classic pkglist
Hit http://ftp.altlinux.org p8/branch/x86_64/classic release
Hit http://ftp.altlinux.org p8/branch/x86_64-i586/classic pkglist
Hit http://ftp.altlinux.org p8/branch/x86_64-i586/classic release
Hit http://ftp.altlinux.org p8/branch/noarch/classic pkglist
Hit http://ftp.altlinux.org p8/branch/noarch/classic release
Reading Package Lists... Done
Building Dependency Tree... Done
Reading Package Lists... Done
Building Dependency Tree... Done
/usr/bin/nvidia-install-driver: line 11: x11presetdrv: command not found
/usr/bin/nvidia-install-driver: line 12: ldconfig: command not found

apt-get install x11presetdrv
Reading Package Lists... Done
Building Dependency Tree... Done
x11presetdrv is already the newest version.
.

sorry if you didn't understand it but i have a question !!
/usr/bin/nvidia-install-driver: line 11: x11presetdrv: command not found
/usr/bin/nvidia-install-driver: line 12: ldconfig: command not found
Why drivers cannot be installed and what can i do??? ???

Оффлайн klark973

  • Давно тут
  • **
  • Сообщений: 653
  • Неспящий саппорт
Re: p8 SL-fix Vga output Resolution
« Ответ #14 : 24.09.2019 15:33:31 »
Hmm, after installing SL8, how do you do a full system upgrade? Or do not you upgrade it?
To moan or to solve -- that is the question!