Автор Тема: МФУ Samsung scx-4623f  (Прочитано 10524 раз)

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
МФУ Samsung scx-4623f
« : 25.06.2021 22:23:16 »
Доброго времени суток

Установил SL P9, стоял P8/
Система не видит МФУ Samsung scx-4623f
Сканер работает.
На P8 все работало.

Прошу помощи.

Оффлайн Skull

  • Глобальный модератор
  • *****
  • Сообщений: 19 908
    • Домашняя страница
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #1 : 25.06.2021 23:18:13 »
А на p8 что делали? Почему переставили, а не обновляли?
Андрей Черепанов (cas@)

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #2 : 25.06.2021 23:24:38 »
Так получилось
Пытался выставить в Центре управления другие настройки монитора и компьютер перестал загружаться дойдя до дисплея.
Решил т.с. с чистого листа.

Оффлайн trs

  • Давно тут
  • **
  • Сообщений: 284
Re: МФУ Samsung scx-4623f
« Ответ #3 : 26.06.2021 05:10:31 »
Для сканера и принтера драйвера ведь устанавливаются отдельно. Может, не всё установили?

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #4 : 26.06.2021 09:44:39 »
Никакие драйвера не ставил.
Р8 принтер видел.

Оффлайн Александр Ерещенко

  • Завсегдатай
  • *
  • Сообщений: 1 153
Re: МФУ Samsung scx-4623f
« Ответ #5 : 26.06.2021 10:54:21 »
Команда apt-cache search cups samsung указывает на:
printer-driver-splix - CUPS printer drivers for SPL (Samsung Printer Language) printers

На родном сайте этого драйвера http://splix.ap2c.org/ ваш принтер упоминается как "не тестировалось"

Установите пакет printer-driver-splix и попробуйте добавить принтер в CUPS уже с этим драйвером (возможно в P8 этот пакет с драйвером у вас был установлен)

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #6 : 26.06.2021 11:25:53 »
Утилиту поставил.
Но в разделе настройка печати МФУ не появился.
Как добавить МФУ в Cups?

Оффлайн Александр Ерещенко

  • Завсегдатай
  • *
  • Сообщений: 1 153
Re: МФУ Samsung scx-4623f
« Ответ #7 : 26.06.2021 11:44:38 »
Утилиту поставил.
Но в разделе настройка печати МФУ не появился.
Как добавить МФУ в Cups?
Удобнее через утилиту "Параметры печати" (system-config-printer)
Вручную добавить новый принтер, а при выборе драйвера выбрать (если не предложит автоматически) Samsung -- SCX-4623f - он есть в списке после установки printer-driver-splix

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #8 : 26.06.2021 12:00:31 »
И куда?
Спойлер
[oleg@comp-pentium-cpu-a993d9 ~]$ system-config-printer
/usr/share/system-config-printer/system-config-printer.py:315: DeprecationWarning: Gtk.ActionGroup.list_actions is deprecated
  for action in printer_manager_action_group.list_actions ():
/usr/share/system-config-printer/system-config-printer.py:316: DeprecationWarning: Gtk.Action.set_sensitive is deprecated
  action.set_sensitive (False)
/usr/share/system-config-printer/system-config-printer.py:324: DeprecationWarning: Gtk.ActionGroup.get_action is deprecated
  act = printer_manager_action_group.get_action (action)
/usr/share/system-config-printer/system-config-printer.py:354: DeprecationWarning: Gtk.UIManager.ensure_update is deprecated
  self.ui_manager.ensure_update ()
/usr/share/system-config-printer/system-config-printer.py:355: DeprecationWarning: Gtk.UIManager.get_accel_group is deprecated
  self.PrintersWindow.add_accel_group (self.ui_manager.get_accel_group ())
/usr/share/system-config-printer/system-config-printer.py:364: DeprecationWarning: Gtk.UIManager.get_action is deprecated
  action = self.ui_manager.get_action ("/new-printer")
/usr/share/system-config-printer/system-config-printer.py:365: DeprecationWarning: Gtk.Action.create_menu_item is deprecated
  newprinteritem = action.create_menu_item ()
/usr/share/system-config-printer/system-config-printer.py:663: DeprecationWarning: Gtk.Action.get_proxies is deprecated
  for widget in action.get_proxies ():
/usr/share/system-config-printer/system-config-printer.py:2236: DeprecationWarning: Gdk.threads_enter is deprecated
  Gdk.threads_enter ()
/usr/share/system-config-printer/system-config-printer.py:2187: DeprecationWarning: Gdk.threads_leave is deprecated
  Gdk.threads_leave ()

« Последнее редактирование: 26.06.2021 12:03:47 от latigid »

Оффлайн Александр Ерещенко

  • Завсегдатай
  • *
  • Сообщений: 1 153
Re: МФУ Samsung scx-4623f
« Ответ #9 : 26.06.2021 13:34:33 »
И куда?
Так он у вас по USB вообще видится? Что говорит lsusb ? Часто для МФУ сканер и принтер видятся как разные устройства

Оффлайн yaleks

  • Мастер
  • ***
  • Сообщений: 6 222
Re: МФУ Samsung scx-4623f
« Ответ #10 : 26.06.2021 13:36:04 »
Под root сканер через sane-find-scanner виден? Тогда возможно надо руками по аналоги правила udev поправить...

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #11 : 26.06.2021 13:36:46 »
lsusb
Спойлер
[oleg@comp-pentium-cpu-a993d9 ~]$ lsusb
Bus 002 Device 004: ID 0951:1689 Kingston Technology DataTraveler SE9
Bus 002 Device 003: ID 04e8:3434 Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 045e:0083 Microsoft Corp. Basic Optical Mouse
Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 003: ID 18ec:3399 Arkmicro Technologies Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[oleg@comp-pentium-cpu-a993d9 ~]$

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #12 : 26.06.2021 13:40:13 »
sane-find-scanner
Спойлер
[oleg@comp-pentium-cpu-a993d9 ~]$ su -
Password:
[root@comp-pentium-cpu-a993d9 ~]# sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

found USB scanner (vendor=0x04e8 [Samsung], product=0x3434 [SCX-4623 Series]) at libusb:002:003
found USB scanner (vendor=0x148f [TPlink], product=0x5370 [802.11 n WLAN]) at libusb:001:004
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
[root@comp-pentium-cpu-a993d9 ~]#
Так он и работает

Оффлайн Александр Ерещенко

  • Завсегдатай
  • *
  • Сообщений: 1 153
Re: МФУ Samsung scx-4623f
« Ответ #13 : 26.06.2021 13:41:16 »
Тогда ещё подробнее про устройство : lsusb -v -d 04e8:3434

Оффлайн latigid

  • Завсегдатай
  • *
  • Сообщений: 286
    • Email
Re: МФУ Samsung scx-4623f
« Ответ #14 : 26.06.2021 13:44:45 »
lsusb -v -d 04e8:3434
Спойлер
[oleg@comp-pentium-cpu-a993d9 ~]$ lsusb -v -d 04e8:3434

Bus 002 Device 003: ID 04e8:3434 Samsung Electronics Co., Ltd
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x04e8 Samsung Electronics Co., Ltd
  idProduct          0x3434
  bcdDevice            1.00
  iManufacturer           1 Samsung
  iProduct                2 SCX-4623 Series
  iSerial                 3 Z2W4BAAZ800714Y
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0037
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              10
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              10
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              10
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval              10
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered
[oleg@comp-pentium-cpu-a993d9 ~]$