Все ли верно я сделал?
[root@host ~]# fdisk -l
Disk /dev/sdb: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x19d2da8f
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 510 4096543+ 82 Linux swap / Solaris
/dev/sdb2 511 6884 51199155 83 Linux
/dev/sdb3 6885 30401 188900302+ 83 Linux
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x162bd507
Device Boot Start End Blocks Id System
/dev/sda1 * 1 509 4088511 82 Linux swap / Solaris
/dev/sda2 510 4333 30716280 83 Linux
/dev/sda3 4334 6882 20474842+ 83 Linux
/dev/sda4 6883 19457 101008687+ 5 Extended
/dev/sda5 6883 19457 101008656 83 Linux
Disk /dev/sdc: 8011 MB, 8011120640 bytes
41 heads, 41 sectors/track, 9307 cylinders
Units = cylinders of 1681 * 512 = 860672 bytes
Disk identifier: 0xc3072e18
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdc1 5 9308 7819328 b W95 FAT32
/dev/sdc3 ? 1 1 0 0 Empty
Partition 3 does not end on cylinder boundary.
[root@host ~]# mount -t vfat /dev/sdc1 /media/disk
mount: mount point /media/disk does not exist
[root@host ~]#
Что не так?