Автор Тема: Система не видит Keyocera km-1635 как сканер  (Прочитано 575 раз)

Оффлайн Vasiliy_ZV

  • Давно тут
  • **
  • Сообщений: 385
  • +++
Здравствуйте, воспользовался статьей https://www.altlinux.org/Настройка_сканера_в_ALT_Linux - но драйвера на сайте производителя не нашлось, ну не беда, поставил ppd-шник с https://github.com/koenkooi/foo2zjs/blob/master/PPD/Kyocera-KM-1635.ppd и пробовал установить по этой же  инструкции, sane уже есть, установлен был самой последней версии, в итоге на шаге проверки доступа оказалось, что доступа нет к шине usb - вот здесь и заткнулся - привожу вывод команд
[user1@localhost ~]$ lsusb
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 006 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 006: ID 0482:033e Kyocera Corp. KM-1635
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[user1@localhost ~]$ sane-find-scanner -q
could not open USB device 0x1d6b/0x0002 at 008:001: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc05b at 006:003: Access denied (insufficient permissions)
could not open USB device 0x046d/0xc312 at 006:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 005:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 007:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0001 at 001:001: Access denied (insufficient permissions)
[user1@localhost ~]$ sudo gpasswd -a user1 lp
[sudo] password for user1:
Добавление пользователя user1 в группу lp
[user1@localhost ~]$ sudo gpasswd -a user1 scanner
Добавление пользователя user1 в группу scanner
Перелогинился...
[user1@localhost ~]$ scanimage -L
MIB search path: /usr/share/snmp/mibs:/usr/share/mibs/net-snmp:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/tubs:/usr/share/mibs/cisco:/usr/share/pibs/ietf:/usr/share/pibs/tubs:
Cannot find module (NET-SNMP-AGENT-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (HOST-RESOURCES-MIB): At line 0 in (none)
Cannot find module (NOTIFICATION-LOG-MIB): At line 0 in (none)
Cannot find module (DISMAN-EVENT-MIB): At line 0 in (none)
Cannot find module (DISMAN-SCHEDULE-MIB): At line 0 in (none)
Cannot find module (EtherLike-MIB): At line 0 in (none)
Cannot find module (HOST-RESOURCES-TYPES): At line 0 in (none)
Cannot find module (IPV6-ICMP-MIB): At line 0 in (none)
Cannot find module (IPV6-MIB): At line 0 in (none)
Cannot find module (IPV6-TCP-MIB): At line 0 in (none)
Cannot find module (IPV6-UDP-MIB): At line 0 in (none)
Cannot find module (UCD-IPFWACC-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (TUNNEL-MIB): At line 0 in (none)
Cannot find module (IPV6-FLOW-LABEL-MIB): At line 0 in (none)
Cannot find module (UCD-DISKIO-MIB): At line 0 in (none)
Cannot find module (LM-SENSORS-MIB): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-VACM-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (IP-FORWARD-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
Cannot find module (NET-SNMP-PASS-MIB): At line 0 in (none)
Cannot find module (NET-SNMP-EXTEND-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[user1@localhost ~]$
« Последнее редактирование: 25.07.2023 14:55:20 от Vasiliy_ZV »

Оффлайн NickM

  • Завсегдатай
  • *
  • Сообщений: 906
Kyocera-KM-1635.ppd
*.ppd - это не про сканер.

Ну и да, Вы уверены, что копировальный аппарат должен уметь сканировать?


« Последнее редактирование: 25.07.2023 15:09:19 от NickM »

Оффлайн Vasiliy_ZV

  • Давно тут
  • **
  • Сообщений: 385
  • +++
Да, точно, операция бессмыслена, благодарю!