мак у меня был указан вместе с именем - неработало. Попробую отдельно мак позже.
Другой вопрос.
При загрузке компа на панели внизу виден значок, т.е. клиент по умолчанию запускается автоматически. После этого запускаю управляющую часть. Создаю классы, добавляю компы... Все нормально. Затем я закрываю окно управляющей части и замечаю, что ярлык клиента тоже пропадает (хотелось бы чтобы он оставался). Поэтому чтобы опять запустить управление, нужно сначала запустить в консоли клиента, делаю так
ica
Клиент запускается и далее можно запускать основную часть, но напрягает, что в консоль потоком идет повторяясь вот это
------------------ USEFUL INFORMATION ------------------
22/03/2011 19:12:29 X DAMAGE available on display, using it for polling hints.
22/03/2011 19:12:29 To disable this behavior use: '-noxdamage'
22/03/2011 19:12:29
22/03/2011 19:12:29 Wireframing: -wireframe mode is in effect for window moves.
22/03/2011 19:12:29 If this yields undesired behavior (poor response, painting
22/03/2011 19:12:29 errors, etc) it may be disabled:
22/03/2011 19:12:29 - use '-nowf' to disable wireframing completely.
22/03/2011 19:12:29 - use '-nowcr' to disable the Copy Rectangle after the
22/03/2011 19:12:29 moved window is released in the new position.
22/03/2011 19:12:29 Also see the -help entry for tuning parameters.
22/03/2011 19:12:29 You can press 3 Alt_L's (Left "Alt" key) in a row to
22/03/2011 19:12:29 repaint the screen, also see the -fixscreen option for
22/03/2011 19:12:29 periodic repaints.
22/03/2011 19:12:29
22/03/2011 19:12:29 XFIXES available on display, resetting cursor mode
22/03/2011 19:12:29 to: '-cursor most'.
22/03/2011 19:12:29 to disable this behavior use: '-cursor arrow'
22/03/2011 19:12:29 or '-noxfixes'.
22/03/2011 19:12:29 using XFIXES for cursor drawing.
22/03/2011 19:12:29 GrabServer control via XTEST.
Xlib: extension "RECORD" missing on display ":0.0".
22/03/2011 19:12:29
22/03/2011 19:12:29 The RECORD X extension was not found on the display.
22/03/2011 19:12:29 If your system has disabled it by default, you can
22/03/2011 19:12:29 enable it to get a nice x11vnc performance speedup
22/03/2011 19:12:29 for scrolling by putting this into the "Module" section
22/03/2011 19:12:29 of /etc/X11/xorg.conf or /etc/X11/XF86Config:
22/03/2011 19:12:29
22/03/2011 19:12:29 Section "Module"
22/03/2011 19:12:29 ...
22/03/2011 19:12:29 Load "record"
22/03/2011 19:12:29 ...
22/03/2011 19:12:29 EndSection
22/03/2011 19:12:29
22/03/2011 19:12:29
22/03/2011 19:12:29 XKEYBOARD: number of keysyms per keycode 6 is greater
22/03/2011 19:12:29 than 4 and 210 keysyms are mapped above 4.
22/03/2011 19:12:29 Automatically switching to -xkb mode.
22/03/2011 19:12:29 If this makes the key mapping worse you can
22/03/2011 19:12:29 disable it with the "-noxkb" option.
22/03/2011 19:12:29 Also, remember "-remap DEAD" for accenting characters.
22/03/2011 19:12:29 X FBPM extension not supported.
22/03/2011 19:12:29 X display is capable of DPMS.
22/03/2011 19:12:29 --------------------------------------------------------
22/03/2011 19:12:29
22/03/2011 19:12:29 Default visual ID: 0x21
22/03/2011 19:12:29 Read initial data from X display into framebuffer.
22/03/2011 19:12:29 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/3200
22/03/2011 19:12:29
22/03/2011 19:12:29 X display :0.0 is 32bpp depth=24 true color
22/03/2011 19:12:29
22/03/2011 19:12:29 Listening for VNC connections on TCP port 5900
22/03/2011 19:12:29 ListenOnTCPPort: Адрес уже используется
22/03/2011 19:12:29
22/03/2011 19:12:29 Xinerama is present and active (e.g. multi-head).
22/03/2011 19:12:29 fb read rate: 761 MB/sec
22/03/2011 19:12:29 fast read: reset wait ms to: 10
22/03/2011 19:12:29 fast read: reset defer ms to: 15
22/03/2011 19:12:29 Error: could not obtain listening port.
22/03/2011 19:12:29 deleted 25 tile_row polling images.
22/03/2011 19:12:29 passing arg to libvncserver: -rfbport
22/03/2011 19:12:29 passing arg to libvncserver: 5900
22/03/2011 19:12:29 x11vnc version: 0.9.4 lastmod: 2008-06-24
22/03/2011 19:12:29 Using X display :0.0
От этого курсор мышки дергается)
Можно ли всю эту полезную информацию отправить куда-нибудь типа /dev/null или что с этим делать? И можно ли сделать так чтобы клиент не вырубался, когда отключается управляющая часть?