Нашел старый тв-тюнер... tvtime пишет Cannot open capture device /dev/video0
Что делать не знаю облазел кучу форумов, результата нету.
при вводе: modprobe bttv пишет
WARNING: All config files need .conf: /etc/modprobe.d/bt878, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bttv, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-modindex, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist-cups, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/local, it will be ignored in a future release.
FATAL: Error inserting bttv (/lib/modules/3.0.38-std-def-alt0.M60P.1/kernel/drivers/media/video/bt8xx/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
03:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
03:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Вроде видит все...
при попытке установить bttv-0.9.15
# make install
strip --strip-debug video-buf.o v4l1-compat.o v4l2-common.o btcx-risc.o ir-common.o bttv.o ir-common.o tuner.o tda9887.o msp3400.o tvaudio.o tvmixer.o
strip: 'video-buf.o': No such file
strip: 'v4l1-compat.o': No such file
strip: 'v4l2-common.o': No such file
strip: 'btcx-risc.o': No such file
strip: 'ir-common.o': No such file
strip: 'bttv.o': No such file
strip: 'ir-common.o': No such file
strip: 'tuner.o': No such file
strip: 'tda9887.o': No such file
strip: 'msp3400.o': No such file
strip: 'tvaudio.o': No such file
strip: 'tvmixer.o': No such file
make: *** [install] Ошибка 1
[root@techlab4 bttv-0.9.15]# make
make -C /lib/modules/3.0.38-std-def-alt0.M60P.1/build SUBDIRS=/home/dlyasin/bttv-0.9.15 modules
make: *** /lib/modules/3.0.38-std-def-alt0.M60P.1/build: No such file or directory. Stop.
make: *** [default] Ошибка 2
3.0.38-std-def-alt0.M60P.1 - Устанавливал...
# dmesg | grep bttv
[ 8.558822] bttv: Unknown parameter `secam'
[ 7580.334893] bttv: Unknown parameter `secam'
[10569.489319] bttv: Unknown parameter `secam'
[10569.506575] bttv: Unknown parameter `secam'
[10611.512290] bttv: Unknown parameter `secam'
[10611.538692] bttv: Unknown parameter `secam'
[10653.978201] bttv: Unknown parameter `secam'
[10654.002196] bttv: Unknown parameter `secam'
[10690.566346] bttv: Unknown parameter `secam'
[10883.308923] bttv: Unknown parameter `secam'
[10883.342309] bttv: Unknown parameter `secam'
[10997.501081] bttv: Unknown parameter `secam'
[12260.864245] bttv: Unknown parameter `secam'
[12260.882728] bttv: Unknown parameter `secam'
[12282.319540] bttv: Unknown parameter `secam'
[12282.335033] bttv: Unknown parameter `secam'
Думал еще V4L ставил его но все равно решил попробывать еще раз и ошибка
make
make -C /home/dlyasin/v4l-dvb-3724e93f7af5/v4l
make[1]: Entering directory `/home/dlyasin/v4l-dvb-3724e93f7af5/v4l'
creating symbolic links...
make -C firmware prep
make[2]: Entering directory `/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/firmware'
make[2]: Leaving directory `/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/firmware'
make -C firmware
make[2]: Entering directory `/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/firmware'
make[2]: Nothing to be done for `default'.
make[2]: Leaving directory `/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/firmware'
Kernel build directory is /lib/modules/3.0.3-std-def-alt0.M60P.1/build
make -C /lib/modules/3.0.3-std-def-alt0.M60P.1/build SUBDIRS=/home/dlyasin/v4l-dvb-3724e93f7af5/v4l CFLAGS="-I../linux/include -D__KERNEL__ -I/include -DEXPORT_SYMTAB" modules
make[2]: Entering directory `/usr/src/linux-3.0.38-std-def-alt0.M60P.1'
CC [M] /home/dlyasin/v4l-dvb-3724e93f7af5/v4l/tuner-xc2028.o
/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/tuner-xc2028.c: In function 'xc2028_set_params':
/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/tuner-xc2028.c:1178:5: error: 'T_DIGITAL_TV' undeclared (first use in this function)
/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/tuner-xc2028.c:1178:5: note: each undeclared identifier is reported only once for each function it appears in
/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/tuner-xc2028.c:1179:1: warning: control reaches end of non-void function
make[3]: *** [/home/dlyasin/v4l-dvb-3724e93f7af5/v4l/tuner-xc2028.o] Ошибка 1
make[2]: *** [_module_/home/dlyasin/v4l-dvb-3724e93f7af5/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-3.0.38-std-def-alt0.M60P.1'
make[1]: *** [default] Ошибка 2
make[1]: Leaving directory `/home/dlyasin/v4l-dvb-3724e93f7af5/v4l'
make: *** [all] Ошибка 2
Помогите пожалуйста и объясните, т.к. новичок.