Автор Тема: Ревёт кулер ноутбука  (Прочитано 3610 раз)

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Ревёт кулер ноутбука
« : 06.01.2016 12:54:17 »
На ядре 4.1.15 разломана работа вентилятора ноутбука.
BIOS хотплажный.
Ранее использовалось 3.14.44-std-def-alt1.

Убрано лишнее:
# cat /etc/modules|tail -n 7

button

#acpi-cpufreq
#cpufreq_ondemand
#cpufreq_userspace
#cpufreq_powersave
# chkconfig --list sysfs
sysfs          0:выкл 1:выкл 2:выкл 3:выкл 4:выкл 5:выкл 6:выкл
# /etc/init.d/sysfs status
Subsystem was not activated.
# grep MHz /proc/cpuinfo
cpu MHz : 800.000
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 26.5 degrees C
Thermal 2: ok, 40.0 degrees C
Thermal 3: ok, 38.0 degrees C
# uname -r
4.1.15-std-def-alt1
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
ondemand performance
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
ondemand
# dmesg|tail -n 30
[   16.034675] device-mapper: uevent: version 1.0.3
[   16.035659] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[   16.980043] kjournald starting.  Commit interval 5 seconds
[   16.980390] EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[   16.981090] EXT3-fs (sda3): using internal journal
[   16.981097] EXT3-fs (sda3): mounted filesystem with writeback data mode
[   17.055756] kjournald starting.  Commit interval 5 seconds
[   17.056115] EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[   17.056838] EXT3-fs (sda2): using internal journal
[   17.056844] EXT3-fs (sda2): mounted filesystem with writeback data mode
[   20.456212] NET: Registered protocol family 17
[   20.829235] NET: Registered protocol family 10
[   20.832498] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.183557] lib80211_crypt: registered algorithm 'CCMP'
[   21.211055] lib80211_crypt: registered algorithm 'TKIP'
[   49.016115] systemd-logind[2092]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   49.016132] systemd-logind[2092]: Failed to fully start up daemon: Input/output error
[   53.289453] systemd-logind[2339]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   53.289479] systemd-logind[2339]: Failed to fully start up daemon: Input/output error
[   53.762549] systemd-logind[2372]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   53.762566] systemd-logind[2372]: Failed to fully start up daemon: Input/output error
[   55.878054] systemd-logind[2425]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   55.878071] systemd-logind[2425]: Failed to fully start up daemon: Input/output error
[   60.986651] systemd-logind[2624]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   60.986674] systemd-logind[2624]: Failed to fully start up daemon: Input/output error
[   61.339864] systemd-logind[2695]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   61.339880] systemd-logind[2695]: Failed to fully start up daemon: Input/output error
[   61.567525] systemd-logind[2707]: Failed to enable subscription: Launch helper exited with unknown return code 1
[   61.567546] systemd-logind[2707]: Failed to fully start up daemon: Input/output error
[   64.618121] Thunar[2307]: segfault at 8 ip b768efef sp bfacb3b0 error 4 in libexo-1.so.0.1.0[b7675000+4a000]

Уводим ноутбук спячкой в память:
# pm-suspend

Просыпаемся:
# grep MHz /proc/cpuinfo
cpu MHz : 800.000
# acpi -t
Thermal 0: ok, 100.0 degrees C
Thermal 1: ok, 26.5 degrees C
Thermal 2: ok, 40.0 degrees C
Thermal 3: ok, 38.0 degrees C

Делаем первый выброс:
# dmesg|tail -n 30
[  267.822378] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[  267.822384] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[  267.822391] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[  267.822398] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff]
[  267.822715] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  267.822720] lpc_ich 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[  267.822725] yenta_cardbus 0000:02:06.0: CardBus bridge to [bus 03-06]
[  267.822728] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[  267.822735] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[  267.822742] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[  267.822748] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff]
[  267.823095] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  267.823100] lpc_ich 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[  267.823105] yenta_cardbus 0000:02:06.0: CardBus bridge to [bus 03-06]
[  267.823108] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[  267.823115] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[  267.823122] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[  267.823128] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff]
[  267.823445] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  267.823450] lpc_ich 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[  267.823455] yenta_cardbus 0000:02:06.0: CardBus bridge to [bus 03-06]
[  267.823458] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3000-0x30ff]
[  267.823465] yenta_cardbus 0000:02:06.0:   bridge window [io  0x3400-0x34ff]
[  267.823472] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd4000000-0xd7ffffff pref]
[  267.823478] yenta_cardbus 0000:02:06.0:   bridge window [mem 0xd8000000-0xdbffffff]
[  267.837348] done.
[  268.406106] ata1.00: configured for UDMA/100
[  268.420284] ata1.01: configured for UDMA/33
[  268.420296] ata1: EH complete
[  268.494283] EXT4-fs (sda1): re-mounted. Opts: commit=0


Готовим кофе и минут через три-пять делаем второй выброс:
# dmesg|tail -n 32
[  268.420296] ata1: EH complete
[  268.494283] EXT4-fs (sda1): re-mounted. Opts: commit=0
[  301.000092] Corrupted low memory at c0002700 (2700 phys) = 00003000
[  301.000102] Corrupted low memory at c0002704 (2704 phys) = 9961008f
[  301.000108] Corrupted low memory at c0002708 (2708 phys) = 00010007
[  301.000113] Corrupted low memory at c000270c (270c phys) = 0000ba3a
[  301.000174] ------------[ cut here ]------------
[  301.000191] WARNING: CPU: 0 PID: 4 at arch/x86/kernel/check.c:140 check_for_bios_corruption+0xb7/0xc0()
[  301.000196] Memory corruption detected in low memory
[  301.000200] Modules linked in: msr uinput michael_mic arc4 ecb lib80211_crypt_tkip lib80211_crypt_ccmp ipv6 cpufreq_stats af_packet ext3 jbd dm_mod wl(PO) ohci_pci ohci_hcd joydev sr_mod btusb cdrom btbcm btintel bluetooth cpufreq_ondemand iTCO_wdt hp_wmi iTCO_vendor_support sparse_keymap ppdev microcode snd_intel8x0 ata_generic snd_ac97_codec ipw2200 pata_acpi b44 snd_pcm libipw sdhci_pci snd_timer lib80211 cfg80211 sdhci psmouse snd ssb yenta_socket mmc_core pcspkr firewire_ohci ata_piix soundcore mii rfkill ac97_bus pcmcia pcmcia_rsrc firewire_core libata crc_itu_t pcmcia_core tifm_7xx1 lpc_ich tifm_core irda crc_ccitt wmi parport_pc thermal fan 8250_fintek parport tpm_infineon uhci_hcd ac battery acpi_cpufreq processor ext4 crc16 mbcache jbd2 sd_mod uas usb_storage scsi_mod evdev serio_raw i915
[  301.000353]  i2c_algo_bit ehci_pci ehci_hcd usbcore usb_common drm_kms_helper drm intel_agp intel_gtt agpgart video button
[  301.000380] CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: P           O    4.1.15-std-def-alt1 #1
[  301.000386] Hardware name: Hewlett-Packard         /3088, BIOS 68DTD Ver. F.0C 11/21/2005
[  301.000395] Workqueue: events check_corruption
[  301.000400]  00000000 00000000 f64cbe84 c14c2358 00000000 f64cbeb4 c104f0c9 c164c208
[  301.000414]  f64cbee0 00000004 c1643be6 0000008c c1041d37 c1041d37 00000000 c0010000
[  301.000427]  c1811d90 f64cbecc c104f17e 00000009 f64cbec4 c164c208 f64cbee0 f64cbef4
[  301.000441] Call Trace:
[  301.000453]  [<c14c2358>] dump_stack+0x41/0x52
[  301.000463]  [<c104f0c9>] warn_slowpath_common+0x89/0xc0
[  301.000471]  [<c1041d37>] ? check_for_bios_corruption+0xb7/0xc0
[  301.000479]  [<c1041d37>] ? check_for_bios_corruption+0xb7/0xc0
[  301.000487]  [<c104f17e>] warn_slowpath_fmt+0x2e/0x30
[  301.000495]  [<c1041d37>] check_for_bios_corruption+0xb7/0xc0
[  301.000503]  [<c1041d4b>] check_corruption+0xb/0x40
[  301.000512]  [<c1062a11>] process_one_work+0x121/0x390
[  301.000521]  [<c1062d9d>] worker_thread+0xed/0x430
[  301.000529]  [<c1062cb0>] ? process_scheduled_works+0x30/0x30
[  301.000537]  [<c1067cb6>] kthread+0x96/0xb0
[  301.000546]  [<c14c8c81>] ret_from_kernel_thread+0x21/0x30
[  301.000554]  [<c1067c20>] ? kthread_create_on_node+0x110/0x110
[  301.000560] ---[ end trace 4cd6186ee6e542a1 ]---

После выхода из спячки, на ядре 4.1.15-std-def, вентилятор ноутбука ревёт как турбина стратегического бомбардировщика на взлёте, затаренного бомбовым грузом под завязку, несмотря на:
# grep MHz /proc/cpuinfo
cpu MHz : 800.000
# acpi -t
Thermal 0: ok, 100.0 degrees C
Thermal 1: ok, 26.9 degrees C
Thermal 2: ok, 39.0 degrees C
Thermal 3: ok, 39.0 degrees C


Теперь на ноутбуке с Линуксом, как в Windows 95:
только включи и выключи, но засыпанием в память никак, - блин (!!!), втуки же идут вразнос.

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 246
  • Учиться .... Телепатами не рождаются, ими ....
    • Email
Re: Ревёт кулер ноутбука
« Ответ #1 : 06.01.2016 13:10:15 »
Вешайти баги

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #2 : 06.01.2016 13:37:12 »
Загрузка с разными ядрами:
# uname -r
3.14.44-std-def-alt1
# grep -rHi acpi /var/log/|grep 'Jan  6 13'
/var/log/syslog/messages:Jan  6 13:00:13 comp kernel: [  240.864220] Modules linked in: msr uinput michael_mic arc4 ecb lib80211_crypt_tkip lib80211_crypt_ccmp ipv6 cpufreq_stats af_packet ext3 jbd dm_mod wl(PO) ohci_pci ohci_hcd joydev sr_mod btusb cdrom bluetooth 6lowpan_iphc cpufreq_ondemand iTCO_wdt hp_wmi iTCO_vendor_support sparse_keymap ppdev ata_generic pata_acpi microcode ipw2200 snd_intel8x0 b44 libipw snd_ac97_codec lib80211 ssb sdhci_pci ata_piix snd_pcm cfg80211 yenta_socket psmouse mii sdhci libata snd_timer pcmcia_rsrc pcmcia pcspkr firewire_ohci mmc_core snd rfkill pcmcia_core firewire_core soundcore crc_itu_t ac97_bus tifm_7xx1 lpc_ich tifm_core irda wmi crc_ccitt parport_pc thermal fan parport tpm_infineon uhci_hcd ac battery acpi_cpufreq processor ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common usb_storage scsi_mod evdev serio_raw ehci_pci ehci_hcd usbcore usb_common i915 i2c_algo_bit drm_kms_helper drm intel_agp intel_gtt agpgart video button
/var/log/kernel/warnings:Jan  6 13:00:13 comp kernel: [  240.864220] Modules linked in: msr uinput michael_mic arc4 ecb lib80211_crypt_tkip lib80211_crypt_ccmp ipv6 cpufreq_stats af_packet ext3 jbd dm_mod wl(PO) ohci_pci ohci_hcd joydev sr_mod btusb cdrom bluetooth 6lowpan_iphc cpufreq_ondemand iTCO_wdt hp_wmi iTCO_vendor_support sparse_keymap ppdev ata_generic pata_acpi microcode ipw2200 snd_intel8x0 b44 libipw snd_ac97_codec lib80211 ssb sdhci_pci ata_piix snd_pcm cfg80211 yenta_socket psmouse mii sdhci libata snd_timer pcmcia_rsrc pcmcia pcspkr firewire_ohci mmc_core snd rfkill pcmcia_core firewire_core soundcore crc_itu_t ac97_bus tifm_7xx1 lpc_ich tifm_core irda wmi crc_ccitt parport_pc thermal fan parport tpm_infineon uhci_hcd ac battery acpi_cpufreq processor ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common usb_storage scsi_mod evdev serio_raw ehci_pci ehci_hcd usbcore usb_common i915 i2c_algo_bit drm_kms_helper drm intel_agp intel_gtt agpgart video button


Загрузка с ядром в 13:22:46
# uname -r
4.1.15-std-def-alt1
# grep -rHi acpi /var/log/|grep 'Jan  6 13'
/var/log/daemons/info:Jan  6 13:21:52 comp acpid: exiting
/var/log/daemons/info:Jan  6 13:21:52 comp acpid: acpid shutdown succeeded
/var/log/daemons/info:Jan  6 13:22:57 comp acpid: starting up with netlink and the input layer
/var/log/daemons/info:Jan  6 13:22:57 comp acpid: acpid startup succeeded
/var/log/daemons/info:Jan  6 13:22:57 comp acpid: 1 rule loaded
/var/log/daemons/info:Jan  6 13:22:58 comp acpid: client connected from 2059[0:0]
/var/log/daemons/info:Jan  6 13:22:58 comp acpid: 1 client rule loaded
/var/log/syslog/messages:Jan  6 13:00:13 comp kernel: [  240.864220] Modules linked in: msr uinput michael_mic arc4 ecb lib80211_crypt_tkip lib80211_crypt_ccmp ipv6 cpufreq_stats af_packet ext3 jbd dm_mod wl(PO) ohci_pci ohci_hcd joydev sr_mod btusb cdrom bluetooth 6lowpan_iphc cpufreq_ondemand iTCO_wdt hp_wmi iTCO_vendor_support sparse_keymap ppdev ata_generic pata_acpi microcode ipw2200 snd_intel8x0 b44 libipw snd_ac97_codec lib80211 ssb sdhci_pci ata_piix snd_pcm cfg80211 yenta_socket psmouse mii sdhci libata snd_timer pcmcia_rsrc pcmcia pcspkr firewire_ohci mmc_core snd rfkill pcmcia_core firewire_core soundcore crc_itu_t ac97_bus tifm_7xx1 lpc_ich tifm_core irda wmi crc_ccitt parport_pc thermal fan parport tpm_infineon uhci_hcd ac battery acpi_cpufreq processor ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common usb_storage scsi_mod evdev serio_raw ehci_pci ehci_hcd usbcore usb_common i915 i2c_algo_bit drm_kms_helper drm intel_agp intel_gtt agpgart video button
/var/log/syslog/messages:Jan  6 13:21:52 comp acpid: exiting
/var/log/syslog/messages:Jan  6 13:21:52 comp acpid: acpid shutdown succeeded
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    6.883677] ACPI: Battery Slot [C174] (battery present)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    6.883816] ACPI: Battery Slot [C173] (battery absent)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    6.884049] ACPI: AC Adapter [C172] (on-line)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.193188] ACPI: Thermal Zone [TZ1] (49 C)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.211215] ACPI: Thermal Zone [TZ2] (42 C)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.239503] ACPI: Thermal Zone [TZ3] (28 C)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.245246] ACPI: Thermal Zone [TZ4] (37 C)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.442789] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000103B (\_SB_.C002.C003.C086) (20150410/utaddress-254)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.442800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.442805] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.442811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.442814] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
/var/log/syslog/messages:Jan  6 13:22:55 comp kernel: [    7.442820] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
/var/log/syslog/messages:Jan  6 13:22:57 comp acpid: starting up with netlink and the input layer
/var/log/syslog/messages:Jan  6 13:22:57 comp acpid: acpid startup succeeded
/var/log/syslog/messages:Jan  6 13:22:57 comp acpid: 1 rule loaded
/var/log/syslog/messages:Jan  6 13:22:58 comp acpid: client connected from 2059[0:0]
/var/log/syslog/messages:Jan  6 13:22:58 comp acpid: 1 client rule loaded
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    6.693281] ACPI: acpi_idle registered with cpuidle
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    6.883677] ACPI: Battery Slot [C174] (battery present)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    6.883816] ACPI: Battery Slot [C173] (battery absent)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    6.884049] ACPI: AC Adapter [C172] (on-line)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.193188] ACPI: Thermal Zone [TZ1] (49 C)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.211215] ACPI: Thermal Zone [TZ2] (42 C)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.239503] ACPI: Thermal Zone [TZ3] (28 C)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.245246] ACPI: Thermal Zone [TZ4] (37 C)
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.442800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.442811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
/var/log/kernel/info:Jan  6 13:22:55 comp kernel: [    7.442820] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
/var/log/kernel/warnings:Jan  6 13:00:13 comp kernel: [  240.864220] Modules linked in: msr uinput michael_mic arc4 ecb lib80211_crypt_tkip lib80211_crypt_ccmp ipv6 cpufreq_stats af_packet ext3 jbd dm_mod wl(PO) ohci_pci ohci_hcd joydev sr_mod btusb cdrom bluetooth 6lowpan_iphc cpufreq_ondemand iTCO_wdt hp_wmi iTCO_vendor_support sparse_keymap ppdev ata_generic pata_acpi microcode ipw2200 snd_intel8x0 b44 libipw snd_ac97_codec lib80211 ssb sdhci_pci ata_piix snd_pcm cfg80211 yenta_socket psmouse mii sdhci libata snd_timer pcmcia_rsrc pcmcia pcspkr firewire_ohci mmc_core snd rfkill pcmcia_core firewire_core soundcore crc_itu_t ac97_bus tifm_7xx1 lpc_ich tifm_core irda wmi crc_ccitt parport_pc thermal fan parport tpm_infineon uhci_hcd ac battery acpi_cpufreq processor ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common usb_storage scsi_mod evdev serio_raw ehci_pci ehci_hcd usbcore usb_common i915 i2c_algo_bit drm_kms_helper drm intel_agp intel_gtt agpgart video button
/var/log/kernel/warnings:Jan  6 13:22:55 comp kernel: [    7.442789] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000103B (\_SB_.C002.C003.C086) (20150410/utaddress-254)
/var/log/kernel/warnings:Jan  6 13:22:55 comp kernel: [    7.442805] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
/var/log/kernel/warnings:Jan  6 13:22:55 comp kernel: [    7.442814] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
И соответственно, после выхода из suspend, не уменьшающийся рёв вентилятора ноутбука NX6110:
# grep MHz /proc/cpuinfo
cpu MHz : 1067.000
# acpi -t
Thermal 0: ok, 100.0 degrees C
Thermal 1: ok, 28.0 degrees C
Thermal 2: ok, 41.0 degrees C
Thermal 3: ok, 39.0 degrees C
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
ondemand performance
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
ondemand
« Последнее редактирование: 06.01.2016 13:54:26 от Speccyfighter »

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #3 : 06.01.2016 14:53:52 »
Вешайти баги

Не знаю что и делать, - как-то оно странно и непредсказуемо.

После выхода из suspend, кулер ревел минут восемь, хотя система ничем не была загружена:
atril с pdf-кой, mousepad, xfce4-terminal + штук пять вкладок без запущенных приложений
# date && pm-suspend && date
Ср янв  6 14:22:08 MSK 2016
Ср янв  6 14:22:31 MSK 2016

после чего плавно сбросил обороты на самый минимум до почти полной тишины:
# uname -r
4.1.15-std-def-alt1
# date
Ср янв  6 14:31:44 MSK 2016
# grep MHz /proc/cpuinfo
cpu MHz : 800.000
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 27.9 degrees C
Thermal 2: ok, 41.0 degrees C
Thermal 3: ok, 40.0 degrees C

Оффлайн Антон Мидюков

  • alt linux team
  • ***
  • Сообщений: 5 183
  • antohami@
Re: Ревёт кулер ноутбука
« Ответ #4 : 06.01.2016 15:27:50 »
Speccyfighter, температура какая?

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #5 : 06.01.2016 15:38:43 »
Повторил последнее.

Обороты кулера в нормальном режиме:
# uname -r
4.1.15-std-def-alt1
# grep MHz /proc/cpuinfo
cpu MHz : 800.000
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.2 degrees C
Thermal 2: ok, 44.0 degrees C
Thermal 3: ok, 43.0 degrees C

Спячка:
# date && pm-suspend && date
Ср янв  6 14:57:52 MSK 2016
Ср янв  6 14:58:15 MSK 2016

После выхода из спячки получаем предельно высокие не уменьшающиеся обороты кулера, хотя сстема ничем не загружена:
# date && grep MHz /proc/cpuinfo
Ср янв  6 14:58:31 MSK 2016
cpu MHz : 800.000
# date && acpi -t
Ср янв  6 14:58:47 MSK 2016
Thermal 0: ok, 100.0 degrees C
Thermal 1: ok, 28.2 degrees C
Thermal 2: ok, 43.0 degrees C
Thermal 3: ok, 39.0 degrees C
Кулер ревёт, ничего не делаем минут 8


Кулер продолжает реветь:
# date
Ср янв  6 15:08:38 MSK 2016

Загружаем браузер palemoon:
# date
Ср янв  6 15:10:41 MSK 2016

И..., - кулер плавно сбрасывает обороты:
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.0 degrees C
Thermal 2: ok, 42.0 degrees C
Thermal 3: ok, 41.0 degrees C

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #6 : 06.01.2016 15:58:53 »
Speccyfighter, температура какая?

С браузером
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.3 degrees C
Thermal 2: ok, 43.0 degrees C
Thermal 3: ok, 43.0 degrees C

Без браузера
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.3 degrees C
Thermal 2: ok, 43.0 degrees C
Thermal 3: ok, 41.0 degrees C

Спячка-выход - высокие обороты (без загруженного palemoon):
# acpi -t
Thermal 0: ok, 100.0 degrees C
Thermal 1: ok, 28.4 degrees C
Thermal 2: ok, 42.0 degrees C
Thermal 3: ok, 39.0 degrees C

С загруженным palemoon до спячки, обороты отлично сбрасываются после выхода из спячки:
# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.9 degrees C
Thermal 2: ok, 44.0 degrees C
Thermal 3: ok, 43.0 degrees C


Оффлайн Антон Мидюков

  • alt linux team
  • ***
  • Сообщений: 5 183
  • antohami@
Re: Ревёт кулер ноутбука
« Ответ #7 : 06.01.2016 16:04:50 »
Thermal 0: ok, 100.0 degrees C

100 градусов по цельсию?

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 246
  • Учиться .... Телепатами не рождаются, ими ....
    • Email
Re: Ревёт кулер ноутбука
« Ответ #8 : 06.01.2016 16:08:40 »
Интересно - а что выдаёт sensors ?

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 246
  • Учиться .... Телепатами не рождаются, ими ....
    • Email
Re: Ревёт кулер ноутбука
« Ответ #9 : 06.01.2016 16:20:13 »
Кстати, а что выдаёт:
acpi -V

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #10 : 06.01.2016 16:24:57 »
Интересно - а что выдаёт sensors ?

Ничего не выдаёт - он у меня на альтовых ядрах не работает из-за:
# grep -rHi region /var/log/|grep 'Jan  6 16'
/var/log/syslog/messages:Jan  6 16:03:05 comp kernel: [    8.317483] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000103B (\_SB_.C002.C003.C086) (20150410/utaddress-254)
/var/log/syslog/messages:Jan  6 16:03:05 comp kernel: [    8.317498] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
/var/log/syslog/messages:Jan  6 16:03:05 comp kernel: [    8.317507] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
/var/log/syslog/messages:Jan  6 16:03:05 comp kernel: [   11.036339] cfg80211:  DFS Master region: unset
/var/log/syslog/messages:Jan  6 16:03:05 comp kernel: [   12.449175] cfg80211:  DFS Master region: unset
/var/log/kernel/info:Jan  6 16:03:05 comp kernel: [   11.036339] cfg80211:  DFS Master region: unset
/var/log/kernel/info:Jan  6 16:03:05 comp kernel: [   12.449175] cfg80211:  DFS Master region: unset
/var/log/kernel/warnings:Jan  6 16:03:05 comp kernel: [    8.317483] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000103B (\_SB_.C002.C003.C086) (20150410/utaddress-254)
/var/log/kernel/warnings:Jan  6 16:03:05 comp kernel: [    8.317498] ACPI Warning: SystemIO range 0x0000000000001130-0x000000000000113F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)
/var/log/kernel/warnings:Jan  6 16:03:05 comp kernel: [    8.317507] ACPI Warning: SystemIO range 0x0000000000001100-0x000000000000112F conflicts with OpRegion 0x0000000000001100-0x000000000000113B (\_SB_.C002.C003.C097) (20150410/utaddress-254)

Будет работать на ядре led-ws, но там смена разрешения не пашет.

И что харатерно, если браузер palemoon загружен до спячки, то при выходе всё нормально, поэтому после обновления ядра и не замечал бяку - у меня в спячку бук уходил с луной:
# grep MHz /proc/cpuinfo
cpu MHz : 800.000

# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.9 degrees C
Thermal 2: ok, 43.0 degrees C
Thermal 3: ok, 42.0 degrees C

# pm-suspend

# ps -eo args|grep palemoon
palemoon
/usr/lib/palemoon/palemoon-bin

# grep MHz /proc/cpuinfo
cpu MHz : 800.000

# acpi -t
Thermal 0: ok, 20.0 degrees C
Thermal 1: ok, 28.9 degrees C
Thermal 2: ok, 43.0 degrees C
Thermal 3: ok, 41.0 degrees C

Я сейчас даже не знаю за что зацепиться при багрепорте.

Руслан, не прекращай пакетить palemoon plz, он у меня будет багфиксом ядерного бага.

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #11 : 06.01.2016 16:27:32 »
Кстати, а что выдаёт:
acpi -V
# acpi -V
Battery 0: Charging, 99%, charging at zero rate - will never fully charge.
Battery 0: design capacity 1379 mAh, last full capacity 1379 mAh = 100%
Adapter 0: on-line
Thermal 0: ok, 20.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 110.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 110.0 degrees C
Thermal 1: ok, 29.1 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 102.0 degrees C
Thermal 1: trip point 1 switches to mode passive at temperature 60.0 degrees C
Thermal 2: ok, 44.0 degrees C
Thermal 2: trip point 0 switches to mode critical at temperature 103.0 degrees C
Thermal 3: ok, 43.0 degrees C
Thermal 3: trip point 0 switches to mode critical at temperature 102.0 degrees C
Thermal 3: trip point 1 switches to mode passive at temperature 100.0 degrees C
Thermal 3: trip point 2 switches to mode active at temperature 80.0 degrees C
Thermal 3: trip point 3 switches to mode active at temperature 70.0 degrees C
Thermal 3: trip point 4 switches to mode active at temperature 60.0 degrees C
Cooling 0: Fan 0 of 1
Cooling 1: Fan 0 of 1
Cooling 2: Fan 0 of 1
Cooling 3: Fan 0 of 1
Cooling 4: Processor 0 of 10

Было бы не обидно, если бы хоть процессор был бы чем-то по-уши загружен, а так, частота на минимуме, а кулер как бешеный.
« Последнее редактирование: 06.01.2016 16:32:30 от Speccyfighter »

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 246
  • Учиться .... Телепатами не рождаются, ими ....
    • Email
Re: Ревёт кулер ноутбука
« Ответ #12 : 06.01.2016 16:34:11 »
Руслан, не прекращай пакетить palemoon plz, он у меня будет багфиксом ядерного бага.
Мне-бы сил набраться и нормальный перевод сделать, а то без русского не комфортно. 

Оффлайн Антон Мидюков

  • alt linux team
  • ***
  • Сообщений: 5 183
  • antohami@
Re: Ревёт кулер ноутбука
« Ответ #13 : 06.01.2016 16:41:47 »
А вы попробуйте вместо palemoon либреоффис запустить и в спячку уйти. Что-то мне кажется, что тут проблема с асинхронной инициализацией устройств при просыпании, привет патчам от интел. И если ядру делать не фиг, то он может опросить датчики до того, как они инициализируются. Отсюда 100 градусов - максимальное знчаение в случае отсутствия ответа от датчика.

Оффлайн Speccyfighter

  • Мастер
  • ***
  • Сообщений: 10 259
Re: Ревёт кулер ноутбука
« Ответ #14 : 06.01.2016 16:44:25 »
Ни черта не пойму.
Перегрузился с выключением:
# uname -r
4.1.15-std-def-alt1
# acpi -V
Battery 0: Full, 100%
Battery 0: design capacity 1379 mAh, last full capacity 1379 mAh = 100%
Adapter 0: on-line
Thermal 0: ok, 20.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 110.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 110.0 degrees C
Thermal 1: ok, 29.1 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 102.0 degrees C
Thermal 1: trip point 1 switches to mode passive at temperature 60.0 degrees C
Thermal 2: ok, 44.0 degrees C
Thermal 2: trip point 0 switches to mode critical at temperature 103.0 degrees C
Thermal 3: ok, 42.0 degrees C
Thermal 3: trip point 0 switches to mode critical at temperature 102.0 degrees C
Thermal 3: trip point 1 switches to mode passive at temperature 100.0 degrees C
Thermal 3: trip point 2 switches to mode active at temperature 80.0 degrees C
Thermal 3: trip point 3 switches to mode active at temperature 70.0 degrees C
Thermal 3: trip point 4 switches to mode active at temperature 60.0 degrees C
Cooling 0: Fan 0 of 1
Cooling 1: Fan 0 of 1
Cooling 2: Fan 0 of 1
Cooling 3: Fan 0 of 1
Cooling 4: Processor 0 of 10
# pm-suspend
# acpi -V
Battery 0: Full, 100%
Battery 0: design capacity 1379 mAh, last full capacity 1379 mAh = 100%
Adapter 0: on-line
Thermal 0: ok, 20.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 110.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 110.0 degrees C
Thermal 1: ok, 29.1 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 102.0 degrees C
Thermal 1: trip point 1 switches to mode passive at temperature 60.0 degrees C
Thermal 2: ok, 44.0 degrees C
Thermal 2: trip point 0 switches to mode critical at temperature 103.0 degrees C
Thermal 3: ok, 41.0 degrees C
Thermal 3: trip point 0 switches to mode critical at temperature 102.0 degrees C
Thermal 3: trip point 1 switches to mode passive at temperature 100.0 degrees C
Thermal 3: trip point 2 switches to mode active at temperature 80.0 degrees C
Thermal 3: trip point 3 switches to mode active at temperature 70.0 degrees C
Thermal 3: trip point 4 switches to mode active at temperature 60.0 degrees C
Cooling 0: Fan 0 of 1
Cooling 1: Fan 0 of 1
Cooling 2: Fan 0 of 1
Cooling 3: Fan 0 of 1
Cooling 4: Processor 0 of 10

Обороты вернулись как положено.