Автор Тема: Драйвер на sr9700  (Прочитано 1486 раз)

Оффлайн Vasiliy_ZV

  • Давно тут
  • **
  • Сообщений: 385
  • +++
Драйвер на sr9700
« : 31.03.2023 14:36:20 »
Здравствуйте! ОС KWorkstations10 не устанавливает usb-ethernet адаптер!
[user1@chestprove ~]$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 26ce:01a2 ASRock LED Controller
Bus 001 Device 005: ID 0fe6:9702 ICS Advent USB 2.0 10/100M Ethernet Adaptor
Bus 001 Device 004: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[user1@chestprove ~]$
Система его видит и диск его видит (Supereal9700), но не добавляет его в список адаптеров доступных для создания ethernet-соединения! Не может прочесть даже его тип и не подхватывает его mac-адрес!
Тут есть одна темка (https://forum.altlinux.org/index.php?topic=46613.msg373655#msg373655) но там, похоже, требуется сборка ядра!? Может есть какие-то специальные утилиты для решения проблемы? Что интересно, под Windows он работает! А на linux-форумах сообщают, что это напрасная трата усилий, 100-рублевый адаптер заставить работать, ведь нормальный стоит всего 400 рублей! Хотя на его упаковке указана, что есть встроенная поддержка Linux-систем!
Похоже тут есть какое-то решение...https://eyesonly666.wordpress.com/2012/10/15/compiling-linux-drivers-for-rd9700-qf9700-ko-under-debian-squeeze/, но для ядра 2.6 от 2012 года((!
« Последнее редактирование: 31.03.2023 15:34:13 от Vasiliy_ZV »

Оффлайн yaleks

  • Мастер
  • ***
  • Сообщений: 6 222
Re: Драйвер на sr9700
« Ответ #1 : 31.03.2023 17:00:24 »
покажите вывод dmesg после подключения адаптера

Оффлайн Vasiliy_ZV

  • Давно тут
  • **
  • Сообщений: 385
  • +++
Re: Драйвер на sr9700
« Ответ #2 : 31.03.2023 18:36:43 »
Это та же операционка, только другая машина
[user1@host-111 ~]$ lsusb
Bus 002 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 1cb6:6672 IdeaCom Technology Inc. IDC 6672
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 002: ID 04f2:b1f3 Chicony Electronics Co., Ltd CNFA213
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0fe6:9702 ICS Advent USB 2.0 10/100M Ethernet Adaptor
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[user1@host-111 ~]$ sudo dmesg
[sudo] password for user1:
[    0.000000] Linux version 5.15.72-un-def-alt1 (builder@localhost.localdomain) (gcc-10 (GCC) 10.3.1 20210703 (ALT Sisyphus 10.3.1-alt2), GNU ld (GNU Binutils) 2.35.2.20210110) #1 SMP PREEMPT Mon Oct 10 16:11:20 UTC 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/mapper/alt-root ro quiet resume=/dev/disk/by-uuid/73dd731c-a74f-4a97-9d4b-c25bb14066e6 panic=30 splash psi=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] signal: max sigframe size: 1440
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Packard Bell oneTwo L5351/oneTwo L5351, BIOS P01-B0 11/04/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2399.899 MHz processor


....................................................................................вырезал часть сообщения из-за ошибки длинны сообщения
[    7.444098] systemd[1]: /lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly.
[    7.498565] systemd[1]: /lib/systemd/system/alteratord.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/alteratord/.socket → /run/alteratord/.socket; please update the unit file accordingly.
[    7.505618] systemd[1]: Queued start job for default target Graphical Interface.
[    7.506805] random: systemd: uninitialized urandom read (16 bytes read)
[    7.507562] systemd[1]: Created slice Slice /system/modprobe.
[    7.507696] random: systemd: uninitialized urandom read (16 bytes read)
[    7.507981] systemd[1]: Created slice User and Session Slice.
[    7.508118] random: systemd: uninitialized urandom read (16 bytes read)
[    7.508263] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.508367] systemd[1]: Reached target Login Prompts.
[    7.508431] systemd[1]: Reached target Preparation for Network.
[    7.508477] systemd[1]: Reached target Remote Encrypted Volumes.
[    7.508532] systemd[1]: Reached target Slice Units.
[    7.508596] systemd[1]: Reached target Local Verity Protected Volumes.
[    7.509749] systemd[1]: Listening on RPCbind Server Activation Socket.
[    7.509850] systemd[1]: Reached target RPC Port Mapper.
[    7.509968] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.510224] systemd[1]: Listening on Journal Audit Socket.
[    7.510379] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.510533] systemd[1]: Listening on Journal Socket.
[    7.510713] systemd[1]: Listening on udev Control Socket.
[    7.510861] systemd[1]: Listening on udev Kernel Socket.
[    7.511008] systemd[1]: Listening on User Database Manager Socket.
[    7.512346] systemd[1]: Mounting Huge Pages File System...
[    7.513770] systemd[1]: Mounting POSIX Message Queue File System...
[    7.515288] systemd[1]: Mounting Kernel Debug File System...
[    7.516810] systemd[1]: Mounting Kernel Trace File System...
[    7.518723] systemd[1]: Starting Create List of Static Device Nodes...
[    7.520399] systemd[1]: Starting Load Kernel Module configfs...
[    7.522235] systemd[1]: Starting Load Kernel Module dm_mod...
[    7.523859] systemd[1]: Starting Load Kernel Module drm...
[    7.525638] systemd[1]: Starting Load Kernel Module efi_pstore...
[    7.527329] systemd[1]: Starting Load Kernel Module fuse...
[    7.529007] systemd[1]: Starting Load Kernel Module loop...
[    7.532591] systemd[1]: Starting RPC Bind...
[    7.534333] systemd[1]: Starting File System Check on Root Device...
[    7.536866] systemd[1]: Starting Journal Service...
[    7.540210] systemd[1]: Starting Load Kernel Modules...
[    7.542304] fuse: init (API version 7.34)
[    7.542547] systemd[1]: Starting Coldplug All udev Devices...
[    7.544309] systemd[1]: Starting Setup Virtual Console...
[    7.549428] systemd[1]: Mounted Huge Pages File System.
[    7.549697] systemd[1]: Mounted POSIX Message Queue File System.
[    7.549975] systemd[1]: Mounted Kernel Debug File System.
[    7.550192] systemd[1]: Mounted Kernel Trace File System.
[    7.550628] systemd[1]: Finished Create List of Static Device Nodes.
[    7.551236] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    7.551616] systemd[1]: Finished Load Kernel Module configfs.
[    7.552246] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    7.552506] systemd[1]: Finished Load Kernel Module dm_mod.
[    7.553170] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    7.553445] systemd[1]: Finished Load Kernel Module drm.
[    7.553992] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    7.554335] systemd[1]: Finished Load Kernel Module efi_pstore.
[    7.554777] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    7.555008] systemd[1]: Finished Load Kernel Module fuse.
[    7.555468] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    7.555700] systemd[1]: Finished Load Kernel Module loop.
[    7.557599] systemd[1]: Mounting FUSE Control File System...
[    7.561952] systemd[1]: Mounting Kernel Configuration File System...
[    7.567609] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[    7.569925] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.574116] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    7.574430] systemd[1]: Started RPC Bind.
[    7.575868] systemd[1]: Mounted FUSE Control File System.
[    7.576314] systemd[1]: Mounted Kernel Configuration File System.
[    7.577213] ACPI: button: Power Button [PWRB]
[    7.577355] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.582203] ACPI: button: Power Button [PWRF]
[    7.601802] systemd[1]: Finished File System Check on Root Device.
[    7.603504] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.614792] systemd[1]: Finished Create Static Device Nodes in /dev.
[    7.620328] EXT4-fs (dm-1): re-mounted. Opts: (null). Quota mode: none.
[    7.622104] systemd[1]: Started Journal Service.
[    7.645271] systemd-journald[2212]: Received client request to flush runtime journal.
[    7.688079] vboxdrv: loading out-of-tree module taints kernel.
[    7.688635] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    7.694573] vboxdrv: Found 4 processor cores
[    7.710461] vboxdrv: TSC mode is Invariant, tentative frequency 2400000052 Hz
[    7.710468] vboxdrv: Successfully loaded version 6.1.38 r153438 (interface 0x00320000)
[    7.714501] VBoxNetFlt: Successfully started.
[    7.717855] VBoxNetAdp: Successfully started.
[    8.068319] i2c i2c-8: nForce2 SMBus adapter at 0x4d00
[    8.068329] ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20210730/utaddress-204)
[    8.068337] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    8.071125] pata_amd 0000:00:06.0: version 0.4.1
[    8.078425] nv_tco: NV TCO WatchDog Timer Driver v0.01
[    8.078533] nv_tco: Watchdog reboot detected
[    8.078606] nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[    8.079142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.080611] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    8.080971] ACPI: \_SB_.LMAC: Enabled at IRQ 22
[    8.082132] scsi host6: pata_amd
[    8.084107] ehci-pci: EHCI PCI platform driver
[    8.084343] ehci-pci 0000:00:02.1: EHCI Host Controller
[    8.084359] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    8.084371] ehci-pci 0000:00:02.1: debug port 1
[    8.084422] ehci-pci 0000:00:02.1: irq 22, io mem 0xfde7ec00
[    8.088873] scsi host7: pata_amd
[    8.088984] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    8.088988] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    8.091079] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    8.094823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.101319] hub 1-0:1.0: USB hub found
[    8.101346] hub 1-0:1.0: 6 ports detected
[    8.101967] ehci-pci 0000:00:04.1: EHCI Host Controller
[    8.101978] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
[    8.101988] ehci-pci 0000:00:04.1: debug port 1
[    8.102053] ehci-pci 0000:00:04.1: irq 20, io mem 0xfde7e800
[    8.109088] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    8.109139] random: crng init done
[    8.109145] random: 77 urandom warning(s) missed due to ratelimiting
[    8.129958] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.136301] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr f8:0f:41:10:43:3c
[    8.136312] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[    8.137200] hub 2-0:1.0: USB hub found
[    8.137226] hub 2-0:1.0: 6 ports detected
[    8.172636] ohci-pci: OHCI PCI platform driver
[    8.172860] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    8.172878] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
[    8.172937] ohci-pci 0000:00:02.0: irq 23, io mem 0xfde7f000
[    8.240672] hub 3-0:1.0: USB hub found
[    8.240694] hub 3-0:1.0: 6 ports detected
[    8.268462] ata8: port disabled--ignoring
[    8.278468] ohci-pci 0000:00:04.0: OHCI PCI host controller
[    8.279390] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[    8.279454] ohci-pci 0000:00:04.0: irq 21, io mem 0xfde7d000
[    8.303936] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.303944] cdrom: Uniform CD-ROM driver Revision: 3.20
[    8.334000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    8.345085] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    8.381495] hub 4-0:1.0: USB hub found
[    8.381511] hub 4-0:1.0: 6 ports detected
[    8.435949] ACPI: \_SB_.LAZA: Enabled at IRQ 21
[    8.435963] snd_hda_intel 0000:00:07.0: Disabling MSI
[    8.437619] ACPI: \_SB_.LN0B: Enabled at IRQ 16
[    8.440141] snd_hda_intel 0000:02:00.1: Codec #0 successfully probed, retry count = 0
[    8.440395] snd_hda_intel 0000:00:07.0: Codec #0 successfully probed, retry count = 0
[    8.454313] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input5
[    8.455338] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    8.514632] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
[    8.515878] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    8.515887] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[    8.515890] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.515892] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.515895] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.515897] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    8.515899] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    8.515901] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    8.551698] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
[    8.551780] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
[    8.551837] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[    8.551888] input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
[    8.551939] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
[    8.552001] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[    8.552070] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
[    8.552122] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
[    8.649607] kvm: Nested Virtualization enabled
[    8.649614] SVM: kvm: Nested Paging enabled
[    8.659728] MCE: In-kernel MCE decoding enabled.
[    8.663140] usb 4-3: new full-speed USB device number 2 using ohci-pci
[    8.666058] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    8.673916] Adding 8781820k swap on /dev/mapper/alt-swap.  Priority:-2 extents:1 across:8781820k SSFS
[    8.891162] input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input7
[    8.918079] mc: Linux media interface: v0.10
[    8.931226] usbcore: registered new interface driver usb-storage
[    8.937235] videodev: Linux video capture interface: v2.00
[    8.943266] usbcore: registered new interface driver uas
[    8.951914] ums-realtek 1-6:1.0: USB Mass Storage device detected
[    8.956237] scsi host8: usb-storage 1-6:1.0
[    8.956408] usbcore: registered new interface driver ums-realtek
[    8.963869] hid: raw HID events driver (C) Jiri Kosina
[    8.966481] usb 1-3: 3:1: cannot get freq at ep 0x84
[    8.977655] usbcore: registered new interface driver usbhid
[    8.977661] usbhid: USB HID core driver
[    8.987238] usbcore: registered new interface driver snd-usb-audio
[    8.989531] usb 1-3: Found UVC 1.00 device CNFA213 (04f2:b1f3)
[    8.996681] input: IDEACOM  IDC 6672 Touchscreen as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1CB6:6672.0001/input/input16
[    8.997121] input: IDEACOM  IDC 6672 Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1CB6:6672.0001/input/input17
[    8.997476] hid-generic 0003:1CB6:6672.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [IDEACOM  IDC 6672] on usb-0000:00:04.0-3/input0
[    9.014814] input: CNFA213: USB 2.0 Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input18
[    9.020499] usbcore: registered new interface driver uvcvideo
[    9.034580] input: IDEACOM  IDC 6672 as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/0003:1CB6:6672.0001/input/input19
[    9.034843] hid-multitouch 0003:1CB6:6672.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [IDEACOM  IDC 6672] on usb-0000:00:04.0-3/input0
[    9.266118] usb 2-6: new high-speed USB device number 3 using ehci-pci
[    9.699927] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.701995] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.710158] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[    9.712902] r8712u: register rtl8712_netdev_ops to netdev_ops
[    9.712908] usb 2-6: r8712u: USB_SPEED_HIGH with 4 endpoints
[    9.713485] usb 2-6: r8712u: Boot from EFUSE: Autoload OK
[    9.978519] scsi 8:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    9.981293] sd 8:0:0:0: [sdb] Media removed, stopped polling
[    9.984283] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[   10.412884] usb 2-6: r8712u: CustomerID = 0x0000
[   10.412900] usb 2-6: r8712u: MAC Address from efuse = 68:a3:c4:22:b6:4a
[   10.412908] usb 2-6: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[   10.413559] usbcore: registered new interface driver r8712u
[   11.203305] forcedeth 0000:00:0a.0 eth0: MSI enabled
[   11.205512] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.289702] NET: Registered PF_QIPCRTR protocol family
[   11.928448] r8712u 2-6:1.0 wlan0: 1 RCR=0x153f00e
[   11.929457] r8712u 2-6:1.0 wlan0: 2 RCR=0x553f00e
[   14.783456] NET: Registered PF_PACKET protocol family
[   22.091831] usb 1-3: 3:1: cannot get freq at ep 0x84
[   23.095072] usb 1-3: 3:1: cannot get freq at ep 0x84
[  233.948250] usb 3-5: new full-speed USB device number 2 using ohci-pci
[  234.161423] usb-storage 3-5:1.0: USB Mass Storage device detected
[  234.161683] scsi host9: usb-storage 3-5:1.0
[  235.191431] scsi 9:0:0:0: CD-ROM                     Supereal VR DISK 1.00 PQ: 0 ANSI: 0
[  235.202456] sr 9:0:0:0: [sr1] scsi3-mmc drive: 126x/126x writer cd/rw xa/form2 tray
[  235.263023] sr 9:0:0:0: Attached scsi CD-ROM sr1
[  255.522446] ISO 9660 Extensions: Microsoft Joliet Level 3
[  255.546409] ISO 9660 Extensions: RRIP_1991A
[user1@host-111 ~]$
« Последнее редактирование: 31.03.2023 18:50:18 от Vasiliy_ZV »

Оффлайн Vasiliy_ZV

  • Давно тут
  • **
  • Сообщений: 385
  • +++
Re: Драйвер на sr9700
« Ответ #3 : 07.04.2023 21:27:12 »
А firmware никакое не решит проблему?