Я так в начале пробовал, но попробую еще. Мои познания слишком скромны проверять
#!/bin/bash
# Contact: Matti Kosola <matti.kosola@jollamobile.com>
#
#
# Copyright (c) 2019, Jolla Ltd.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of the <organization> nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -e
function check_fastboot {
FASTBOOT_BIN_NAME=$1
if [ -f "$FASTBOOT_BIN_NAME" ]; then
chmod 755 $FASTBOOT_BIN_NAME
# Ensure that the binary that is found can be executed fine
if ./$FASTBOOT_BIN_NAME help &>/dev/null; then
FASTBOOT_BIN_PATH="./"
return 0
fi
fi
return 1
}
UNAME=$(uname)
# Do not need root for fastboot on Mac OS X
if [ "$UNAME" != "Darwin" -a $(id -u) -ne 0 ]; then
exec sudo -E bash $0
fi
OS_VERSION=
case $UNAME in
Linux)
echo "Detected Linux"
;;
Darwin)
IFS='.' read -r major minor patch <<< $(sw_vers -productVersion)
OS_VERSION=$major-$minor
echo "Detected Mac OS X - Version: $OS_VERSION"
;;
*)
echo "Failed to detect operating system!"
exit 1
;;
esac
FASTBOOT_BIN_PATH=
FASTBOOT_BIN_NAME=
if ! check_fastboot "fastboot-$UNAME-$OS_VERSION" ; then
if ! check_fastboot "fastboot-$UNAME"; then
# In case we didn't provide functional fastboot binary to the system
# lets check that one is found from the system.
if ! which fastboot &>/dev/null; then
echo "No 'fastboot' found in \$PATH. To install, use:"
echo ""
echo " Debian/Ubuntu/.deb distros: apt-get install android-tools-fastboot"
echo " Fedora: yum install android-tools"
echo " OS X: brew install android-sdk"
echo ""
exit 1
else
FASTBOOT_BIN_NAME=fastboot
fi
fi
fi
echo "Searching device to flash.."
IFS=$'\n'
FASTBOOTCMD_NO_DEVICE="${FASTBOOT_BIN_PATH}${FASTBOOT_BIN_NAME}"
FASTBOOT_DEVICES=$($FASTBOOTCMD_NO_DEVICE devices |cut -d$'\t' -f1)
if [ -z "$FASTBOOT_DEVICES" ]; then
echo "No device that can be flashed found. Please connect your device in fastboot mode before running this script."
exit 1
fi
SERIALNUMBERS=
count=0
for SERIALNO in $FASTBOOT_DEVICES; do
PRODUCT=$($FASTBOOTCMD_NO_DEVICE -s $SERIALNO getvar product 2>&1 | head -n1 | cut -d ' ' -f2)
if [ ! -z "$(echo $PRODUCT | grep -e "H4113" -e "H4133")" ]; then
SERIALNUMBERS="$SERIALNO $SERIALNUMBERS"
((++count))
fi
done
IFS=" "
echo "Found $count devices: $SERIALNUMBERS"
if [ $count -ne 1 ]; then
echo "Incorrect number of devices connected. Make sure there is exactly one device connected in fastboot mode."
exit 1
fi
TARGET_SERIALNO=$SERIALNUMBERS
FASTBOOTCMD="${FASTBOOT_BIN_PATH}${FASTBOOT_BIN_NAME} -s $TARGET_SERIALNO $FASTBOOTEXTRAOPTS"
echo "Fastboot command: $FASTBOOTCMD"
ANDROIDVERSION=$($FASTBOOTCMD getvar version-baseband 2>&1 | head -n1)
FIRMWAREVERSION=$(echo $ANDROIDVERSION | cut -d ' ' -f2 | cut -d '_' -f2)
echo "Your device firmware version identifier is $FIRMWAREVERSION"
if [ "$($FASTBOOTCMD getvar secure 2>&1 | head -n1 | cut -d ' ' -f2 )" == "yes" ]; then
echo; echo "This device has not been unlocked, but you need that for flashing."
echo "Please go to
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/ and see instructions how to unlock your device."
echo;
exit 1;
fi
if [ -z ${BINARY_PATH} ]; then
BINARY_PATH=./
fi
if [ -z ${SAILFISH_IMAGE_PATH} ]; then
SAILFISH_IMAGE_PATH=./
fi
IMAGES=(
"boot_a ${SAILFISH_IMAGE_PATH}hybris-boot.img"
"boot_b ${SAILFISH_IMAGE_PATH}hybris-boot.img"
"userdata ${SAILFISH_IMAGE_PATH}sailfish.img001"
"system_b ${SAILFISH_IMAGE_PATH}fimage.img001"
"vendor_a ${SAILFISH_IMAGE_PATH}vendor.img001"
"vendor_b ${SAILFISH_IMAGE_PATH}vendor.img001"
)
if [ "$UNAME" = "Darwin" ]; then
# macOS doesn't have md5sum so lets use md5 there.
while read -r line; do
md5=$(echo $line | awk '{ print $1 }')
filename=$(echo $line | awk '{ print $2 }')
md5calc=$(md5 $filename | cut -d '=' -f2 | tr -d '[:space:]')
if [ "$md5" != "$md5calc" ]; then
echo; echo "md5 sum does not match on file: $filename ($md5 vs $md5calc). Please re-download the package again."
echo;
exit 1;
fi
done < md5.lst
else
if [ "$(md5sum -c md5.lst --status;echo $?)" -eq "1" ]; then
echo; echo "md5sum does not match, please download the package again."
echo;
exit 1;
fi
fi
FLASHCMD="$FASTBOOTCMD flash"
for IMAGE in "${IMAGES
read partition ifile <<< $IMAGE
if [ ! -e ${ifile} ]; then
echo "Image binary missing: ${ifile}."
exit 1
fi
done
if [ -z ${BLOB_BIN_PATH} ]; then
BLOB_BIN_PATH=./
fi
BLOBS=""
for b in $(ls -1 ${BLOB_BIN_PATH}/*_{v16,v17}_nile.img 2>/dev/null); do
if [ -n "$BLOBS" ]; then
echo; echo More than one supported Sony Vendor image was found in this directory.
echo Please remove any additional files.
echo
exit 1
fi
BLOBS=$b
done
if [ -z $BLOBS ]; then
echo; echo "The supported Sony Vendor partition image wasn't found in the current directory."
echo Please download it from
echo
https://developer.sony.com/develop/open-devices/downloads/software-binaries/ echo Ensure you download the supported version of the image found under:
echo '"Software binaries for AOSP Oreo (Android 8.1) - Kernel 4.4 - Nile"'
echo and unzip it into this directory.
echo Note: information on which versions are supported is written in our Sailfish X
echo installation instructions online
https://jolla.com/sailfishxinstall echo
exit 1
fi
for IMAGE in "${IMAGES
read partition ifile <<< $IMAGE
echo "Flashing $partition partition.."
$FLASHCMD $partition $ifile
done
echo "Flashing oem partition.."
$FLASHCMD oem_a $BLOBS
echo
echo "Flashing completed."
echo
echo "Remove the USB cable and bootup the device by pressing powerkey."
echo
