Доброго времени суток, уважаемые Гуру.
Я рылся в поиске на данном форуме, но к сожалению ничего подходящего мне не нашел.
Столкнулся со следующей проблемой.
Дано: КПК Asus A626 (WM 6 Classic), ALT Linux Desktop 4.1 (2.6.25-std-def-alt8.M41.1)
synce-kde-0.9.1-alt4
synce-vdccm-0.10.1-alt2
synce-serial-0.11-alt1
libsynce-0.11-alt1
synce-dccm-0.9.1-alt1
synce-kpm-0.11-alt1
libsynce-kde-0.9.1-alt4
synce-odccm-0.11-alt1
raki + зависимости
Инструкцию по связыванию оных девайсов.
$raki
$dccm //либо vdccm
#synce-serial-config ttyUSB0
Подключаем девайс в USB-кредл
#synce-serial-start
Наслаждаемся
После моих следований инструкции
$ sudo synce-serial-config ttyUSB0
ERROR:
synce-serial-config was unable to find a character device named "ttyUSB0"
Run "synce-serial-config --help" to get help.
[quote]
$ sudo synce-serial-config --help
Syntax for synce-serial-config:
synce-serial-config serial-device [local-ip-address:remote-ip_address [DNS-server-name]]
The serial-device specifies the name of your serial port device.
These are the port names on Linux:
ttyS0 The first serial port
ttyS1 The second serial port
...
You can also connect via an infrared connection (IrDA). This requires
that you already have irattach running.
ircomm0 The first IrDA communication port
Please send corrections and updates to the above information to the
SynCE development mailing list: synce-devel@lists.sourceforge.net
If you do not provide the local_ip_address:remote_ip_address parameter,
synce-serial-config will use 192.168.131.102:192.168.131.201.
If you want to specify these addresses yourself, you may want to read
about the same option on the man page for pppd.
[/quote]
Может быть кто-то настраивал? Подскажите пожалуйста, что можно сделать. Где найти ttyUSB0?
Ах да, девайс определяется в usb 1-1.4 (Хаб, 4 слот)
Заранее благодарю за помощь.