Автор Тема: Smart Board Software и Simply Linux 7  (Прочитано 16034 раз)

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #30 : 22.09.2016 11:08:58 »
А вот что выдает при удачной установке
[root@comp-pentium-cpu-9c13e9 smart_software_11_rpm_files]# rpm -Uvh smart-*.rpm
Подготовка...      ###########################################################################################
smart-common                 ###########################################################################################
smart-languagesetup          ###########################################################################################
smart-hwr                    ###########################################################################################
smart-activation             ###########################################################################################
Failed to load: /opt/SMART Technologies/Activation Wizard/bin/.././Languages/en_US/activationwizard
HashVerifier: message hash not valid
Failed to load definitions
HashVerifier: message hash not valid
smart-gallerysetup           ###########################################################################################
smart-notebook               ###########################################################################################
Trial already installed, cannot install again.
smart-product-drivers        ###########################################################################################
Configuring USB ports. Creating udev SMARBoard.rules
Running /usr/lib/rpm/posttrans-filetriggers

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #31 : 22.09.2016 11:43:03 »
dmesg что выдает при подключении?

[root@comp-pentium-cpu-9c13e9 ~]# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.32-std-def-alt1 (builder@localhost.localdomain) (gcc version 4.7.2 20121109 (ALT Linux 4.7.2-alt9) (GCC) ) #1 SMP Mon Feb 24 09:17:30 UTC 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bce3efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bce3f000-0x00000000bcebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcebf000-0x00000000bcfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfbf000-0x00000000bcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Quanta SWH/SWH, BIOS DU311 03/29/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BD000000 mask FFF000000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 13FE00000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c0095000] 95000 size 16384
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x01772000, 0x01772fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37774000-0x37bb1fff]
[    0.000000] Allocated new RAMDISK: [mem 0x37336000-0x37773997]
[    0.000000] Move RAMDISK from [mem 0x37774000-0x37bb1997] to [mem 0x37336000-0x37773997]

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #32 : 22.09.2016 11:43:40 »
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 QUANTA)
[    0.000000] ACPI: XSDT bcffe120 00084 (v01 QUANTA   QUANTA 00000001      01000013)
[    0.000000] ACPI: FACP bcffc000 000F4 (v04 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT bcfe9000 0F7C3 (v01 QUANTA   QUANTA 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS bcf6e000 00040
[    0.000000] ACPI: ASF! bcffd000 000A5 (v32 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET bcffb000 00038 (v01 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC bcffa000 0008C (v02 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG bcff9000 0003C (v01 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC bcfe8000 00176 (v01 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT bcfe7000 00224 (v01 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT bcfe6000 001DE (v01 QUANTA   QUANTA 00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT bcfe4000 00028 (v01 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT bcfe1000 00034 (v07 QUANTA   QUANTA 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT bcfe0000 0090C (v01 QUANTA   QUANTA 00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT bcfdf000 00996 (v01 QUANTA   QUANTA 00003000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2136MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x01773000, 0x01773fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0xbcffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00098fff]
[    0.000000]   node   0: [mem 0x00100000-0xbce3efff]
[    0.000000]   node   0: [mem 0xbcfff000-0xbcffffff]
[    0.000000] On node 0 totalpages: 773592
[    0.000000] free_area_init_node: node 0, pgdat c1620900, node_mem_map f5b96020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3992 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4273 pages used for memmap
[    0.000000]   HighMem zone: 546370 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000099000 - 000000000009a000
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f7784000 s32576 r0 d20672 u53248
[    0.000000] pcpu-alloc: s32576 r0 d20672 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 771816
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=fbabbee8-7f99-41c7-b22c-e43f69e3b0db ro quiet=1 resume=/dev/disk/by-uuid/c0c75ecb-186a-4094-803c-7d2a9cb54290 panic=30 splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] allocated 6193144 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000bd000)
[    0.000000] Memory: 3050236k/3096576k available (4157k kernel code, 44128k reserved, 2155k data, 640k init, 2185476k highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd33000 - 0xfffff000   (2864 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc162b000 - 0xc16cb000   ( 640 kB)
      .data : 0xc140f681 - 0xc162a640   (2155 kB)
      .text : 0xc1000000 - 0xc140f681   (4157 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #33 : 22.09.2016 11:44:16 »
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2194.769 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.53 BogoMIPS (lpj=8779076)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000025] Security Framework initialized
[    0.000029] AppArmor: AppArmor disabled by boot time parameter
[    0.000038] Mount-cache hash table entries: 512
[    0.000210] Initializing cgroup subsys memory
[    0.000217] Initializing cgroup subsys devices
[    0.000219] Initializing cgroup subsys freezer
[    0.000220] Initializing cgroup subsys net_cls
[    0.000222] Initializing cgroup subsys blkio
[    0.000223] Initializing cgroup subsys perf_event
[    0.000226] Initializing cgroup subsys hugetlb
[    0.000249] CPU: Physical Processor ID: 0
[    0.000250] CPU: Processor Core ID: 0
[    0.000254] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000257] mce: CPU supports 7 MCE banks
[    0.000267] CPU0: Thermal monitoring handled by SMI
[    0.000278] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[    0.000531] Freeing SMP alternatives: 16k freed
[    0.002203] ACPI: Core revision 20130328
[    0.009374] ACPI: All ACPI Tables successfully acquired
[    0.020238] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060378] smpboot: CPU0: Intel(R) Pentium(R) CPU B960 @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[    0.060385] TSC deadline timer enabled
[    0.060393] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.060399] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.060402] ... version:                3
[    0.060403] ... bit width:              48
[    0.060404] ... generic registers:      8
[    0.060405] ... value mask:             0000ffffffffffff
[    0.060407] ... max period:             000000007fffffff
[    0.060408] ... fixed-purpose events:   3
[    0.060409] ... event mask:             00000007000000ff
[    0.060668] CPU 1 irqstacks, hard=f50fa000 soft=f50fc000
[    0.070872] Initializing CPU#1
[    0.071724] CPU1: Thermal monitoring handled by SMI
[    0.060669] smpboot: Booting Node   0, Processors  #1
[    0.073848] Brought up 2 CPUs
[    0.073852] ----------------
[    0.073853] | NMI testsuite:
[    0.073854] --------------------
[    0.073915] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.073855]   remote IPI:  ok  |
[    0.093876]    local IPI:  ok  |
[    0.121924] --------------------
[    0.121928] Good, all   2 testcases passed! |
[    0.121931] ---------------------------------
[    0.121936] smpboot: Total of 2 processors activated (8779.07 BogoMIPS)
[    0.123699] devtmpfs: initialized
[    0.123925] PM: Registering ACPI NVS region [mem 0xbcebf000-0xbcfbefff] (1048576 bytes)
[    0.124213] regulator-dummy: no parameters
[    0.124291] NET: Registered protocol family 16
[    0.124700] EISA bus registered
[    0.124737] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.124739] ACPI: bus type PCI registered
[    0.124884] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.124887] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.124888] PCI: Using MMCONFIG for extended config space
[    0.124889] PCI: Using configuration type 1 for base access
[    0.125010] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.125012] mtrr: probably your BIOS does not setup all CPUs.
[    0.125013] mtrr: corrected configuration.
[    0.127457] bio: create slab <bio-0> at 0
[    0.127699] ACPI: Added _OSI(Module Device)
[    0.127701] ACPI: Added _OSI(Processor Device)
[    0.127702] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.127705] ACPI: Added _OSI(Processor Aggregator Device)
[    0.129769] ACPI: EC: Look up EC in DSDT
[    0.131786] ACPI: Executed 1 blocks of module-level executable AML code
[    0.146073] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.162541] ACPI: SSDT bce90718 00667 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.163079] ACPI: Dynamic OEM Table Load:
[    0.163081] ACPI: SSDT   (null) 00667 (v01  PmRef  Cpu0Cst 00003001 INTL 20100121)
[    0.170390] ACPI: SSDT bce91a98 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.170969] ACPI: Dynamic OEM Table Load:
[    0.170971] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20100121)
[    0.186212] ACPI: SSDT bce8fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.186736] ACPI: Dynamic OEM Table Load:
[    0.186738] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20100121)
[    0.217167] ACPI: Interpreter enabled
[    0.217177] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    0.217182] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.217198] ACPI: (supports S0 S3 S4 S5)
[    0.217200] ACPI: Using IOAPIC for interrupt routing
[    0.217268] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.217426] ACPI: No dock devices found.
[    0.243081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.243125] \_SB_.PCI0:_OSC invalid UUID
[    0.243126] _OSC request data:1 8 0
[    0.243830] PCI host bridge to bus 0000:00
[    0.243833] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.243836] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.243838] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.243840] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.243842] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[    0.243853] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.243977] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.243990] pci 0000:00:02.0: reg 10: [mem 0xc8000000-0xc83fffff 64bit]
[    0.243997] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xc7ffffff 64bit pref]
[    0.244003] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
[    0.244146] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.244173] pci 0000:00:16.0: reg 10: [mem 0xca604000-0xca60400f 64bit]
[    0.244256] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.244379] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.244642] pci 0000:00:1a.0: reg 10: [mem 0xca609000-0xca6093ff]
[    0.246116] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.246299] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.246317] pci 0000:00:1b.0: reg 10: [mem 0xca600000-0xca603fff 64bit]
[    0.246393] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.246453] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.246511] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.246598] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.246661] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.246718] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.246805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.246865] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.246923] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.247010] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.247071] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.247137] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.247392] pci 0000:00:1d.0: reg 10: [mem 0xca608000-0xca6083ff]
[    0.248867] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.248952] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.249016] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.249231] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.249253] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
[    0.249264] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
[    0.249273] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
[    0.249282] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
[    0.249291] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
[    0.249301] pci 0000:00:1f.2: reg 24: [mem 0xca607000-0xca6077ff]
[    0.249353] pci 0000:00:1f.2: PME# supported from D3hot
[    0.249457] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.249476] pci 0000:00:1f.3: reg 10: [mem 0xca605000-0xca6050ff 64bit]
[    0.249498] pci 0000:00:1f.3: reg 20: [io  0x5040-0x505f]
[    0.249726] pci 0000:07:00.0: [10ec:8176] type 00 class 0x028000
[    0.249753] pci 0000:07:00.0: reg 10: [io  0x4000-0x40ff]
[    0.249802] pci 0000:07:00.0: reg 18: [mem 0xca500000-0xca503fff 64bit]
[    0.249948] pci 0000:07:00.0: supports D1 D2
[    0.249950] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.250013] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.254234] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.254246] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.254256] pci 0000:00:1c.0:   bridge window [mem 0xca500000-0xca5fffff]
[    0.254401] pci 0000:08:00.0: [1969:1083] type 00 class 0x020000
[    0.254432] pci 0000:08:00.0: reg 10: [mem 0xca400000-0xca43ffff 64bit]
[    0.254448] pci 0000:08:00.0: reg 18: [io  0x3000-0x307f]
[    0.254583] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.254638] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.262258] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.262269] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.262280] pci 0000:00:1c.1:   bridge window [mem 0xca400000-0xca4fffff]
[    0.262430] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.262435] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.262440] pci 0000:00:1c.3:   bridge window [mem 0xc9400000-0xca3fffff]
[    0.262447] pci 0000:00:1c.3:   bridge window [mem 0xc8400000-0xc93fffff 64bit pref]
[    0.262464] pci_bus 0000:00: on NUMA node 0
[    0.262511] \_SB_.PCI0:_OSC invalid UUID
[    0.262512] _OSC request data:1 1f 0
[    0.262516] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.262519] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.263224] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.263290] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.263353] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.263417] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.263479] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.263544] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.263607] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.263669] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.264030] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.264040] acpi root: \_SB_.PCI0 notify handler is installed
[    0.264100] Found 1 acpi root devices
[    0.264144] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.264385] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.264389] vgaarb: loaded
[    0.264390] vgaarb: bridge control possible 0000:00:02.0
[    0.264402] sta2x11_scr_init
[    0.264427] sta2x11_apb_soc_regs_init
[    0.264452] sta2x11_sctl_init
[    0.264476] sta2x11_apbreg_init
[    0.265076] PCI: Using ACPI for IRQ routing
[    0.266769] PCI: pci_cache_line_size set to 64 bytes
[    0.266821] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[    0.266823] e820: reserve RAM buffer [mem 0xbce3f000-0xbfffffff]
[    0.266825] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[    0.266990] NetLabel: Initializing
[    0.266992] NetLabel:  domain hash size = 128
[    0.266993] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.267003] NetLabel:  unlabeled traffic allowed by default
[    0.267050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.267057] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.269070] Switching to clocksource hpet
[    0.270582] pnp: PnP ACPI init
[    0.270594] ACPI: bus type PNP registered
[    0.271291] pnp 00:00: [dma 4]
[    0.271351] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.271408] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.271531] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.271602] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.271682] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.271686] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.271688] system 00:04: [io  0x0810-0x0813] has been reserved
[    0.271690] system 00:04: [io  0xffff] has been reserved
[    0.271693] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.271695] system 00:04: [io  0x0454-0x0457] has been reserved
[    0.271697] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.271699] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.271701] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.271704] system 00:04: [io  0x0380-0x0387] has been reserved
[    0.271706] system 00:04: [io  0x06a0-0x06a7] has been reserved
[    0.271709] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271772] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.271842] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.272038] pnp 00:07: Plug and Play ACPI device, IDs STLc033 PNP0f13 (active)
[    0.272209] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.272212] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.272214] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.272217] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.272219] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.272222] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.272224] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.272226] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.272229] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.272231] system 00:08: [mem 0xbfa00000-0xbfa00fff] has been reserved
[    0.272234] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.272558] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved
[    0.272561] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved
[    0.272564] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.272583] pnp: PnP ACPI: found 10 devices
[    0.272584] ACPI: bus type PNP unregistered
[    0.272587] PnPBIOS: Disabled by ACPI PNP
[    0.311800] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.311806] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.311812] pci 0000:00:1c.0:   bridge window [mem 0xca500000-0xca5fffff]
[    0.311822] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.311826] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.311832] pci 0000:00:1c.1:   bridge window [mem 0xca400000-0xca4fffff]
[    0.311841] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.311844] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.311850] pci 0000:00:1c.3:   bridge window [mem 0xc9400000-0xca3fffff]
[    0.311855] pci 0000:00:1c.3:   bridge window [mem 0xc8400000-0xc93fffff 64bit pref]
[    0.312148] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.312151] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.312153] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.312155] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.312157] pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
[    0.312159] pci_bus 0000:07: resource 1 [mem 0xca500000-0xca5fffff]
[    0.312161] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.312163] pci_bus 0000:08: resource 1 [mem 0xca400000-0xca4fffff]
[    0.312165] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.312167] pci_bus 0000:09: resource 1 [mem 0xc9400000-0xca3fffff]
[    0.312169] pci_bus 0000:09: resource 2 [mem 0xc8400000-0xc93fffff 64bit pref]
[    0.312212] NET: Registered protocol family 2
[    0.312358] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.312374] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.312389] TCP: Hash tables configured (established 8192 bind 8192)
[    0.312400] TCP: reno registered
[    0.312403] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.312407] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.312469] NET: Registered protocol family 1
[    0.312480] pci 0000:00:02.0: Boot video device
[    0.341367] PCI: CLS 64 bytes, default 64
[    0.341404] Trying to unpack rootfs image as initramfs...
[    0.432080] Freeing initrd memory: 4344k freed
[    0.432750] sta2x11_mfd_init
[    0.432891] Simple Boot Flag at 0x44 set to 0x1
[    0.432975] Machine check injector initialized
[    0.433037] Scanning for low memory corruption every 60 seconds
[    0.433374] audit: initializing netlink socket (disabled)
[    0.433384] type=2000 audit(1474530554.428:1): initialized
[    0.454978] bounce pool size: 64 pages
[    0.454991] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.455081] VFS: Disk quotas dquot_6.5.2
[    0.455108] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.455231] aufs 3.x-rcN
[    0.455235] msgmni has been set to 1697
[    0.455523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.455554] io scheduler noop registered
[    0.455556] io scheduler deadline registered (default)
[    0.456004] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.456005] crc32: self tests passed, processed 225944 bytes in 216159 nsec
[    0.456226] crc32c: CRC_LE_BITS = 64
[    0.456227] crc32c: self tests passed, processed 225944 bytes in 108603 nsec
[    0.456943] intel_idle: MWAIT substates: 0x21120
[    0.456944] intel_idle: v0.4 model 0x2A
[    0.456946] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.457014] GHES: HEST is not enabled!
[    0.457024] isapnp: Scanning for PnP cards...
[    0.811270] isapnp: No Plug & Play device found
[    0.839537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.842592] brd: module loaded
[    0.842777] libphy: Fixed MDIO Bus: probed
[    0.842863] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2A] at 0x60,0x64 irq 1,12
[    0.846470] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.846474] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.846642] mousedev: PS/2 mouse device common for all mice
[    0.846705] rtc_cmos 00:05: RTC can wake from S4
[    0.846862] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.846892] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.847052] platform eisa.0: Probing EISA bus 0
[    0.847055]  (null): [io  0x0c80-0x0c83]
[    0.847057] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.847153] cpuidle: using governor ladder
[    0.847218] cpuidle: using governor menu
[    0.847261] ledtrig-cpu: registered to indicate activity on CPUs
[    0.847385] TCP: bic registered
[    0.847436] Key type dns_resolver registered
[    0.847689] Using IPI No-Shortcut mode
[    0.847880] PM: Checking hibernation image partition /dev/disk/by-uuid/c0c75ecb-186a-4094-803c-7d2a9cb54290
[    0.920295] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.925414] PM: Hibernation image not present or could not be loaded.
[    0.925443] registered taskstats version 1
[    0.925829] rtc_cmos 00:05: setting system clock to 2016-09-22 07:49:15 UTC (1474530555)
[    0.926095] ### dt-test ### No testcase data in device tree; not running tests
[    0.926249] Freeing unused kernel memory: 640k freed
[    0.926371] Write protecting the kernel text: 4160k
[    0.926432] Write protecting the kernel read-only data: 1820k
[    0.953700] systemd-udevd[1081]: starting version 201
[    0.981128] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #34 : 22.09.2016 11:44:49 »
[    0.981135] ACPI: Power Button [PWRB]
[    0.981185] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.981188] ACPI: Sleep Button [SLPB]
[    0.981237] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    0.981631] ACPI: Lid Switch [LID0]
[    0.981696] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    0.981700] ACPI: Power Button [PWRF]
[    0.993367] Linux agpgart interface v0.103
[    0.994493] [drm] Initialized drm 1.1.0 20060810
[    0.996294] SCSI subsystem initialized
[    0.998285] ACPI: bus type ATA registered
[    0.998910] [drm] Memory usable by graphics device = 2048M
[    0.998917] i915 0000:00:02.0: setting latency timer to 64
[    0.999065] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.999073] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.999074] [drm] Driver supports precise vblank timestamp query.
[    0.999124] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.009918] libata version 3.00 loaded.
[    1.022703] [drm] Wrong MCH_SSKPD value: 0x16040307
[    1.022707] [drm] This can cause pipe underruns and display issues.
[    1.022708] [drm] Please upgrade your BIOS to fix this.
[    1.039477] fbcon: inteldrmfb (fb0) is primary device
[    1.430404] tsc: Refined TSC clocksource calibration: 2195.012 MHz
[    1.430412] Switching to clocksource tsc
[    1.722305] Console: switching to colour frame buffer device 170x48
[    1.725857] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.725859] i915 0000:00:02.0: registered panic notifier
[    1.727447] acpi device:37: registered as cooling_device0
[    1.727604] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.727647] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    1.727706] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.727740] ahci 0000:00:1f.2: version 3.0
[    1.727874] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.727932] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.727935] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.727941] ahci 0000:00:1f.2: setting latency timer to 64
[    1.735088] scsi0 : ahci
[    1.735156] scsi1 : ahci
[    1.735207] scsi2 : ahci
[    1.735255] scsi3 : ahci
[    1.735313] scsi4 : ahci
[    1.735394] scsi5 : ahci
[    1.735445] ata1: SATA max UDMA/133 abar m2048@0xca607000 port 0xca607100 irq 41
[    1.735448] ata2: SATA max UDMA/133 abar m2048@0xca607000 port 0xca607180 irq 41
[    1.735450] ata3: DUMMY
[    1.735451] ata4: DUMMY
[    1.735452] ata5: DUMMY
[    1.735454] ata6: DUMMY
[    2.055063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.055143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.056884] ata2.00: ATAPI: HL-DT-STDVDRAM GT40N, SL03, max UDMA/100
[    2.058825] ata2.00: configured for UDMA/100
[    2.101075] ata1.00: ATA-8: TOSHIBA MK5059GSXP, GN001A, max UDMA/100
[    2.101095] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.102086] ata1.00: configured for UDMA/100
[    2.102371] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5059GS GN00 PQ: 0 ANSI: 5
[    2.103923] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT40N     SL03 PQ: 0 ANSI: 5
[    2.106717] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.106721] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.106761] sd 0:0:0:0: [sda] Write Protect is off
[    2.106763] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.106797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.183499]  sda: sda1 sda4 < sda5 sda6 >
[    2.183984] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.824072] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.199164] PM: Starting manual resume from disk
[    3.199168] PM: Hibernation image partition 8:5 present
[    3.199170] PM: Looking for hibernation image.
[    3.236541] PM: Image not found (code -22)
[    3.236550] PM: Hibernation image not present or could not be loaded.
[    3.342776] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.598626] systemd[1]: systemd 201 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP -GCRYPT +ACL +XZ)
[    4.644372] systemd[1]: Set hostname to <comp-pentium-cpu-9c13e9.localdomain>.
[    5.189937] device-mapper: uevent: version 1.0.3
[    5.190077] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    5.218306] LVM: Failed to initialize library context for activation generator.
[    5.218401] LVM: Activation generator successfully completed.
[    5.445737] systemd[1]: [/lib/systemd/system/systemd-journald.service:22] Failed to parse capability in bounding set, ignoring: CAP_SYSLOG
[    6.007731] systemd[1]: Starting Collect Read-Ahead Data...
[    6.026514] systemd[1]: Starting Replay Read-Ahead Data...
[    6.027021] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.027118] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.027146] systemd[1]: Starting Remote File Systems.
[    6.027183] systemd[1]: Reached target Remote File Systems.
[    6.027199] systemd[1]: Starting Delayed Shutdown Socket.
[    6.027261] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.027271] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.027314] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.027342] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.027465] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.027491] systemd[1]: Starting Journal Socket.
[    6.027569] systemd[1]: Listening on Journal Socket.
[    6.027599] systemd[1]: Mounting Huge Pages File System...
[    6.027930] systemd[1]: Mounting Debug File System...
[    6.028262] systemd[1]: Starting Set default kernel console loglevel...
[    6.043477] systemd[1]: Starting Journal Service...
[    6.043902] systemd[1]: Started Journal Service.
[    6.044098] systemd[1]: Mounting POSIX Message Queue File System...
[    6.044441] systemd[1]: Expecting device dev-disk-by\x2duuid-c0c75ecb\x2d186a\x2d4094\x2d803c\x2d7d2a9cb54290.device...
[    6.044531] systemd[1]: Starting udev Kernel Socket.
[    6.044583] systemd[1]: Listening on udev Kernel Socket.
[    6.044637] systemd[1]: Starting udev Control Socket.
[    6.044685] systemd[1]: Listening on udev Control Socket.
[    6.044737] systemd[1]: Starting udev Coldplug all Devices...
[    6.045127] systemd[1]: Starting udev Kernel Device Manager...
[    6.045506] systemd[1]: Expecting device dev-disk-by\x2duuid-e691ba74\x2d545f\x2d4057\x2d84ed\x2de84baa84816a.device...
[    6.057195] systemd-readahead[1201]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[    6.336351] systemd-udevd[1209]: starting version 201
[    6.566142] systemd-sysctl[1219]: Duplicate assignment of kernel/sysrq in file '/lib/sysctl.d/50-default.conf', ignoring.
[    7.201456] ACPI: Requesting acpi_cpufreq
[    7.206511] ACPI: bus type USB registered
[    7.206540] usbcore: registered new interface driver usbfs
[    7.206550] usbcore: registered new interface driver hub
[    7.207305] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[    7.207312] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.207316] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    7.207320] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.GPIO 2 (20130328/utaddress-251)
[    7.207323] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.207325] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    7.207328] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.GPIO 2 (20130328/utaddress-251)
[    7.207331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.207332] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[    7.207335] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.GPIO 2 (20130328/utaddress-251)
[    7.207338] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.207340] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.207617] usbcore: registered new device driver usb
[    7.208141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.208322] ehci-pci: EHCI PCI platform driver
[    7.208479] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    7.208489] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    7.208495] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    7.208510] ehci-pci 0000:00:1a.0: debug port 2
[    7.212402] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    7.212422] ehci-pci 0000:00:1a.0: irq 16, io mem 0xca609000
[    7.224375] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    7.224398] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.224400] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.224403] usb usb1: Product: EHCI Host Controller
[    7.224405] usb usb1: Manufacturer: Linux 3.10.32-std-def-alt1 ehci_hcd
[    7.224407] usb usb1: SerialNumber: 0000:00:1a.0
[    7.224531] hub 1-0:1.0: USB hub found
[    7.224535] hub 1-0:1.0: 2 ports detected
[    7.224749] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    7.224756] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    7.224761] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    7.224776] ehci-pci 0000:00:1d.0: debug port 2
[    7.228689] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    7.228708] ehci-pci 0000:00:1d.0: irq 23, io mem 0xca608000
[    7.238203] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    7.238211] ACPI: Battery Slot [BAT0] (battery present)
[    7.239106] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    7.239701] ACPI: AC Adapter [ACAD] (on-line)
[    7.239968] wmi: Mapper loaded
[    7.240508] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    7.240529] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    7.240531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.240534] usb usb2: Product: EHCI Host Controller
[    7.240535] usb usb2: Manufacturer: Linux 3.10.32-std-def-alt1 ehci_hcd
[    7.240537] usb usb2: SerialNumber: 0000:00:1d.0
[    7.240968] hub 2-0:1.0: USB hub found
[    7.240972] hub 2-0:1.0: 2 ports detected
[    7.241270] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    7.257582] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    7.265933] thermal LNXTHERM:00: registered as thermal_zone0
[    7.265937] ACPI: Thermal Zone [TZ01] (53 C)
[    7.271796] cfg80211: Calling CRDA to update world regulatory domain
[    7.276650] sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.276654] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.276764] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.282263] ACPI Warning: 0x00005040-0x0000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[    7.282269] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.285376] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    7.295853] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
[    7.296986] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    7.298385] lib80211: common routines for IEEE802.11 drivers
[    7.298388] lib80211_crypt: registered algorithm 'NULL'
[    7.304152] atl1c 0000:08:00.0: version 1.0.1.1-NAPI
[    7.455290] iTCO_vendor_support: vendor-support=0
[    7.455426] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    7.455454] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    7.456007] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.471480] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
[    7.473091] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.482965] systemd-udevd[1235]: renamed network interface eth0 to enp8s0
[    7.536686] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    7.556593] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    7.556757] rtlwifi: wireless switch is on
[    7.669227] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    7.669238] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.669645] hub 1-1:1.0: USB hub found
[    7.669691] hub 1-1:1.0: 6 ports detected
[    7.699059] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    7.716152] psmouse serio1: hgpk: ID: 10 00 64
[    7.780983] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    7.816946] wl: module license 'unspecified' taints kernel.
[    7.816950] Disabling lock debugging due to kernel taint
[    7.841173] systemd-udevd[1232]: renamed network interface wlan0 to wlp7s0
[    7.877838] EXT4-fs (sda1): re-mounted. Opts: (null)
[    7.913443] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    7.913447] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.913592] hub 2-1:1.0: USB hub found
[    7.913690] hub 2-1:1.0: 6 ports detected
[    7.985319] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    8.122555] usb 1-1.2: New USB device found, idVendor=5986, idProduct=04ac
[    8.122565] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    8.122571] usb 1-1.2: Product: USB Webcam
[    8.122576] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
[    8.201621] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    8.244693] media: Linux media interface: v0.10
[    8.245878] Linux video capture interface: v2.00
[    8.247103] uvcvideo: Found UVC 1.00 device USB Webcam (5986:04ac)
[    8.261619] input: USB Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[    8.261694] usbcore: registered new interface driver uvcvideo
[    8.261696] USB Video Class driver (1.1.1)
[    8.362571] usb 1-1.3: New USB device found, idVendor=0a12, idProduct=0001
[    8.362578] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    8.433840] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[    8.490226] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input9
[    8.526976] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0129
[    8.526987] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.526993] usb 1-1.5: Product: USB2.0-CRW
[    8.526998] usb 1-1.5: Manufacturer: Generic
[    8.527003] usb 1-1.5: SerialNumber: 20100201396000000
[    8.545839] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    8.549249] scsi6 : SCSI emulation for RTS5139 USB card reader
[    8.549381] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    8.554271] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    8.554636] usbcore: registered new interface driver rts5139
[    8.598202] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[    8.694278] usb 2-1.3: New USB device found, idVendor=0458, idProduct=003a
[    8.694288] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.694293] usb 2-1.3: Product: Optical Mouse
[    8.694298] usb 2-1.3: Manufacturer: Genius
[    8.712095] hidraw: raw HID events driver (C) Jiri Kosina
[    8.714822] usbcore: registered new interface driver usbhid
[    8.714824] usbhid: USB HID core driver
[    8.715758] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[    8.715868] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[    8.758098] Bluetooth: Core ver 2.16
[    8.758114] NET: Registered protocol family 31
[    8.758116] Bluetooth: HCI device and connection manager initialized
[    8.758122] Bluetooth: HCI socket layer initialized
[    8.758124] Bluetooth: L2CAP socket layer initialized
[    8.758129] Bluetooth: SCO socket layer initialized
[    8.761132] usbcore: registered new interface driver btusb
[    8.766078] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[    8.859310] usb 2-1.5: New USB device found, idVendor=0b8c, idProduct=0069
[    8.859321] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.859328] usb 2-1.5: Product: Touchscreen
[    8.859333] usb 2-1.5: Manufacturer: NextWindow
[    8.861611] hid-generic 0003:0B8C:0069.0002: hiddev0,hidraw1: USB HID v1.11 Device [NextWindow Touchscreen] on usb-0000:00:1d.0-1.5/input1
[    8.867156] Adding 4094968k swap on /dev/sda5.  Priority:-1 extents:1 across:4094968k FS
[   12.522069] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   18.421541] systemd-logind[1527]: Watching system buttons on /dev/input/event4 (Power Button)
[   18.421669] systemd-logind[1527]: Watching system buttons on /dev/input/event5 (Video Bus)
[   18.421787] systemd-logind[1527]: Watching system buttons on /dev/input/event1 (Power Button)
[   18.421896] systemd-logind[1527]: Watching system buttons on /dev/input/event3 (Lid Switch)
[   18.422008] systemd-logind[1527]: Watching system buttons on /dev/input/event2 (Sleep Button)
[   18.569110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.569114] Bluetooth: BNEP filters: protocol multicast
[   18.569122] Bluetooth: BNEP socket layer initialized
[   19.397537] NET: Registered protocol family 10
[   19.504195] Bluetooth: RFCOMM TTY layer initialized
[   19.504206] Bluetooth: RFCOMM socket layer initialized
[   19.504208] Bluetooth: RFCOMM ver 1.11
[   21.776664] vboxdrv: Found 2 processor cores.
[   21.782275] vboxdrv: fAsync=0 offMin=0x348 offMax=0x108c
[   21.782341] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   21.782342] vboxdrv: Successfully loaded version 4.3.6_OSE (interface 0x001a0007).
[   21.799054] vboxpci: IOMMU not found (not registered)
[   21.804767] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   21.824570] NET: Registered protocol family 17
[   21.848741] atl1c 0000:08:00.0: irq 43 for MSI/MSI-X
[   21.849250] atl1c 0000:08:00.0: atl1c: enp8s0 NIC Link is Up<100 Mbps Full Duplex>
[   78.472858] usb 2-1.5: USB disconnect, device number 4
[   81.233874] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[   81.327544] usb 2-1.5: New USB device found, idVendor=0b8c, idProduct=0069
[   81.327556] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   81.327563] usb 2-1.5: Product: Touchscreen
[   81.327568] usb 2-1.5: Manufacturer: NextWindow
[   81.333870] hid-generic 0003:0B8C:0069.0003: hiddev0,hidraw1: USB HID v1.11 Device [NextWindow Touchscreen] on usb-0000:00:1d.0-1.5/input1
[  247.757435] UDF-fs: INFO Mounting volume 'SMART Education', timestamp 2011/08/04 05:36 (11e0)

Оффлайн Skull

  • Глобальный модератор
  • *****
  • Сообщений: 18 691
    • Домашняя страница
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #35 : 22.09.2016 12:56:37 »
FileDigest относится только к внутренним зависимостям RPM. Его можно преодолеть, установив экспериментальный rpm  из задания 166699 (доступно только для Sisyphus/p8).
libgmp.so.3 — очень старая версия libgmp. Сейчас актуальная 10-ая. Надо пересобирать древнюю или на свой страх и риск делать симлинк со старым soname с нового libgmp.
Пакеты-то не установились.
Андрей Черепанов (cas@)

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #36 : 22.09.2016 12:59:32 »
FileDigest относится только к внутренним зависимостям RPM. Его можно преодолеть, установив экспериментальный rpm  из задания 166699 (доступно только для Sisyphus/p8).
libgmp.so.3 — очень старая версия libgmp. Сейчас актуальная 10-ая. Надо пересобирать древнюю или на свой страх и риск делать симлинк со старым soname с нового libgmp.
Пакеты-то не установились.

Эм... Если честно, то я ничего не понял... какой экспериментальный, что пересобирать? Я как бы с линуксом, мягко говоря, не очень... Особенно если дело касается пересборок и прочего...

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 30 553
  • Учиться .... Телепатами не рождаются, ими ....
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #37 : 22.09.2016 13:31:04 »
   rpmlib(FileDigests) <= 4.6.0-1 нужен для smart-gallerysetup-1.3.6133.1-1
FileDigest относится только к внутренним зависимостям RPM. Его можно преодолеть, установив экспериментальный rpm  из задания 166699 (доступно только для Sisyphus/p8).

   libgmp.so.3   нужен для smart-gallerysetup-1.2.559.1-1
libgmp.so.3 — очень старая версия libgmp. Сейчас актуальная 10-ая. Надо пересобирать древнюю или на свой страх и риск делать симлинк со старым soname с нового libgmp.
Пакеты-то не установились.

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #38 : 22.09.2016 15:17:45 »
Так... погодите... Это как раз те версии ,которые просто не захотели ставиться. Но одна то версия установилась... И вот то, что я выше написал - это все с этой установленной...

Ну... Или проще - 6 версия нормально пойдет?

Оффлайн berkut_174

  • Мастер
  • ***
  • Сообщений: 7 009
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #39 : 22.09.2016 15:23:29 »
igormm
Эта версия точно нормально ставится на p7 https://forum.altlinux.org/index.php?topic=31552.msg235600#msg235600 и работает, в частности, с досками SB660, но с небольшими оговорками:
Тут проблема появилась, если доску подключить после входа в систему, то она не определяется "Мастером подключения". Если же подключить доску и сделать перелогин, или же сразу подлючить до включения ПК, то всё нормально.
« Последнее редактирование: 22.09.2016 15:25:03 от berkut_174 »
Сноси Винду, переходи на Линукс ! :)

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #40 : 22.09.2016 15:26:41 »
Эта версия точно работает нормально ставится на p7

Тогда ноут этого преподавателя проклят... Это уже третья система, в которой нормально ДОЛЖНА ставиться эта доска... Я в ступоре...

Оффлайн YYY

  • Мастер
  • ***
  • Сообщений: 5 636
Re: Smart Board Software и Simply Linux 7
« Ответ #41 : 22.09.2016 16:08:30 »
Эта версия точно работает нормально ставится на p7

Тогда ноут этого преподавателя проклят...

нет. просто ноут хочет работать на
http://mirror.yandex.ru/ubuntu-cdimage/xubuntu/releases/12.04/release/xubuntu-12.04.4-desktop-i386.iso

:)))

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #42 : 22.09.2016 16:27:37 »
нет. просто ноут хочет работать на

Я уже начинаю в этом сильно сомневаться...
Ну, завтра попробую. Если проектор тоже запустится...

Оффлайн igormm

  • Давно тут
  • **
  • Сообщений: 121
    • Email
Re: Smart Board Software и Simply Linux 7
« Ответ #43 : 23.09.2016 02:44:25 »
И все таки... 6 версия альтлинукс на каких ядрах? или проще - на него доска, смотрю, без проблем (ТОЖЕ) ставилась? Совсем древние Убунты ставить не очень хочется, альт как то более современно смотрится... Какую версию лучше скачать?

Оффлайн YYY

  • Мастер
  • ***
  • Сообщений: 5 636
Re: Smart Board Software и Simply Linux 7
« Ответ #44 : 23.09.2016 02:50:19 »
И все таки... 6 версия альтлинукс на каких ядрах?

если из реп обновить то проектор вроде должен подцепиться...
а с доской опять только экспериментом.

но 6ка уже давно без поддержки, а 12.04 еще на поддержке до апреля 17го