mount -t ntfs-3g /dev/sdd1 /run/media/.../sdd1 -o force
# fdisk -lDisk /dev/sdd: 1000.2 GB, 1000170586112 bytes, 1953458176 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x043df545Устр-во Загр Начало Конец Блоки Id Система/dev/sdd1 2048 1953458175 976728064 7 HPFS/NTFS/exFAT
$ lsusbProtocol spec without prior Class and Subclass spec at line 17403Bus 002 Device 003: ID 1058:1078 Western Digital Technologies, Inc.
$ dmesg[ 506.644046] usb 2-2: new high-speed USB device number 3 using xhci_hcd[ 506.765958] usb-storage 2-2:1.0: USB Mass Storage device detected[ 506.766068] scsi7 : usb-storage 2-2:1.0[ 507.767805] scsi 7:0:0:0: Direct-Access WD Elements 1078 1065 PQ: 0 ANSI: 6[ 507.769685] sd 7:0:0:0: [sdd] Spinning up disk...[ 508.769835] .....ready[ 512.779849] sd 7:0:0:0: [sdd] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)[ 512.780662] sd 7:0:0:0: [sdd] Write Protect is off[ 512.780664] sd 7:0:0:0: [sdd] Mode Sense: 53 00 10 08[ 512.781572] sd 7:0:0:0: [sdd] No Caching mode page found[ 512.781575] sd 7:0:0:0: [sdd] Assuming drive cache: write through[ 512.783587] sd 7:0:0:0: [sdd] No Caching mode page found[ 512.783590] sd 7:0:0:0: [sdd] Assuming drive cache: write through[ 512.946900] sdd: sdd1[ 512.948958] sd 7:0:0:0: [sdd] No Caching mode page found[ 512.948961] sd 7:0:0:0: [sdd] Assuming drive cache: write through[ 512.948964] sd 7:0:0:0: [sdd] Attached SCSI disk[ 543.664037] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 543.664149] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 543.765977] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 543.766087] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 543.867928] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 543.884334] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d880[ 543.884342] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d8c0[ 762.559852] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 762.559895] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 762.661847] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 762.661866] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 762.763823] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 762.780138] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d880[ 762.780141] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d8c0[ 795.566926] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 795.566947] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 795.668898] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 795.668934] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 795.770834] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 795.787138] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d880[ 795.787141] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d8c0[ 826.527151] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 826.527271] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 826.629006] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 826.629045] xhci_hcd 0000:02:00.0: Setup ERROR: setup context command for slot 1.[ 826.730969] usb 2-2: reset high-speed USB device number 3 using xhci_hcd[ 826.747255] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d880[ 826.747258] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800a2d5d8c0
Какой дистрибутив, какой DM (Gnome/Mate/xfce/....).Если чистая консоль, то можно udiskctl использовать, или hmount. pmount, mnt ...(опять-же всё зависит от дистрибутива, и что в нём установленно штатно).
А KDE4 и сам умеет монтировать.
Что-то не видно.
-o force
А обычные USB-флэшки тоже не монтируются?
может там у вас виндоус "уснул", или "прилёг для быстрого старта"?
http://microsoftportal.net/windows-8/901-delaem-otklyuchenie-i-vklyuchenie-bystroy-zagruzki-v-windows-8.html
http://www.kv.by/content/321827-windows-8-ne-lyubit-linuksoidov