После всех моих мучений по установке драйверов к dvb карте получил следующее:
[root@home ~]# pciscan -v
Recommended driver Description
------------------ -----------
intel-agp Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [Host bridge]
8086:2570:1019:2001 drivers: 31:intel-agp class:006:00:00
slot: 0000:00:00.0 hwid: 48EEB080FCC5DE20
intelfb Intel Corporation 82865G Integrated Graphics Controller [VGA compatible controller]
8086:2572:1019:2001 drivers: 27:intelfb class:003:00:00
slot: 0000:00:02.0 hwid: C41BD7244F21C25C
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [UHCI USB Controller]
8086:24d2:1019:2001 drivers: 2.4|usb-uhci 2.4|uhci 2.6|uhci-hcd 7:uhci-hcd usb-uhci 2.6|uhci-hcd class:00c:03:00
slot: 0000:00:1d.0 hwid: E4FB22016FE5AEA2
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [UHCI USB Controller]
8086:24d4:1019:2001 drivers: 2.4|usb-uhci 2.4|uhci 2.6|uhci-hcd 7:uhci-hcd usb-uhci 2.6|uhci-hcd class:00c:03:00
slot: 0000:00:1d.1 hwid: E31B5BE6F361610C
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [UHCI USB Controller]
8086:24d7:1019:2001 drivers: 2.4|usb-uhci 2.4|uhci 2.6|uhci-hcd 7:uhci-hcd usb-uhci 2.6|uhci-hcd class:00c:03:00
slot: 0000:00:1d.2 hwid: E0EB67153DF68B83
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [UHCI USB Controller]
8086:24de:1019:2001 drivers: 2.4|usb-uhci 2.4|uhci 2.6|uhci-hcd 7:uhci-hcd class:00c:03:00
slot: 0000:00:1d.3 hwid: A34F1EF2A7DE6AA9
ehci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [EHCI USB Controller]
8086:24dd:1019:2001 drivers: ehci-hcd 7:ehci-hcd ehci-hcd class:00c:03:20
slot: 0000:00:1d.7 hwid: 82B62EA5BEBC79F7
shpchp Intel Corporation 82801 PCI Bridge [PCI bridge Normal decode]
8086:244e drivers: 7:shpchp hw_random class:006:04:00
slot: 0000:00:1e.0 hwid: BB51A8EDB1BBF7F0
i8xx_tco intel-rng Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [ISA bridge]
8086:24d0 drivers: 24:i8xx_tco 24:intel-rng class:006:01:00
slot: 0000:00:1f.0 hwid: 9716644700A36A78
piix Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [IDE interface storage controller]
8086:24db:1019:2001 drivers: 24:piix 3:generic piix class:001:01:8a
slot: 0000:00:1f.1 hwid: 16481CDF1BD79CA7
ata_piix Intel Corporation 82801EB (ICH5) SATA Controller [IDE interface storage controller]
8086:24d1:1019:2001 drivers: 24:ata_piix 3:generic ata_piix class:001:01:8f
slot: 0000:00:1f.2 hwid: B9CEEE18BEDDE08C
i2c-i801 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [SMBus]
8086:24d3:1019:2001 drivers: 24:i2c-i801 class:00c:05:00
slot: 0000:00:1f.3 hwid: C4404EA1DB7F54E2
snd-intel8x0 Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [Multimedia audio controller]
8086:24d5:1019:2001 drivers: 24:snd-intel8x0 snd-intel8x0 class:004:01:00
slot: 0000:00:1f.5 hwid: BD1F1221073BF19F
ohci1394 VIA Technologies, Inc. IEEE 1394 Host Controller [OHCI FireWire (IEEE 1394)]
1106:3044:1106:3044 drivers: ohci1394 7:ohci1394 ohci1394 class:00c:00:10
slot: 0000:01:02.0 hwid: 04A868BD43479680
unknown Philips Semiconductors SAA7146 [Multimedia controller]
1131:7146:13c2:1018 drivers: dvb class:004:80:00
slot: 0000:01:03.0 hwid: 4920F77E422E0064
8139too Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [Ethernet controller]
10ec:8139:10ec:8139 drivers: 112:8139too 24:8139cp 24:8139too 8139too class:002:00:00
slot: 0000:01:09.0 hwid: 25C8B729345A752C
*******
dmesg
Linux version 2.6.18-std-smp-alt12.M40.1 (builder@apiary.rio.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Wed May 7 18:40:50 MSD 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006f7f0000 (usable)
BIOS-e820: 000000006f7f0000 - 000000006f7f3000 (ACPI NVS)
BIOS-e820: 000000006f7f3000 - 000000006f800000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
887MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5240
On node 0 totalpages: 456688
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 227312 pages, LIFO batch:31
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f6c90
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x6f7f3040
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x6f7f30c0
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x6f7f7240
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 70000000 (gap: 6f800000:8f400000)
Detected 2528.033 MHz processor.
Built 1 zonelists. Total pages: 456688
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=4160ebd3-6702-47e7-b466-4d4c31f15ad7 resume=/dev/hda1 panic=30 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1806764k/1826752k available (1591k kernel code, 18796k reserved, 638k data, 192k init, 909248k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5059.74 BogoMIPS (lpj=10119498)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000651d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 536k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
CPU0: Intel(R) Celeron(R) CPU 2.53GHz stepping 09
Total of 1 processors activated (5059.74 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: f8000000-f80fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1230110138.580:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 3750k, total 8000k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 105069 bytes,<6>...found (800x600, 24730 bytes, v3).
Console: switching to colour frame buffer device 97x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 192k freed
Executing init=/init
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda4 < hda5 >
hdc: Optiarc DVD RW AD-7170A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
SCSI subsystem initialized
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xC400 ctl 0xC802 bmdma 0xD400 irq 169
ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xD002 bmdma 0xD408 irq 169
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0xC407
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0xCC07
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low) -> IRQ 185
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[f8000000-f80007ff] Max Packet=[2048] IR/IT contexts=[4/8]
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 193, io mem 0xf8180000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp 0000:01:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:01:09.0: Try the "8139too" driver instead.
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000b000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000b400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000b800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ts: Compaq touchscreen protocol output
intel8x0_measure_ac97_clock: measured 58657 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 21 (level, low) -> IRQ 209
eth0: RealTek RTL8139 at 0xf8f68000, 00:14:2a:8c:45:54, IRQ 209
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011066645555d89]
Adding 1044184k swap on /dev/hda1. Priority:-1 extents:1 across:1044184k
EXT3 FS on hda2, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Thermal Zone [THRM] (41 C)
[drm] Initialized drm 1.1.0 20060810
PCI: Unable to reserve mem region #1:8000000@f0000000 for device 0000:00:02.0
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.9.0 20070209 on minor 0
[drm] Used old pci detect: framebuffer loaded
NET: Registered protocol family 4
NET: Registered protocol family 5
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 105069 bytes,<6>...found (800x600, 24730 bytes, v3).
bootsplash: status on console 1 changed to on
