Видео Nvidia Geforce 6200. Раньше пользовался Windows, разрешение экрана 1280х768 выставлялось без проблем. В KDesktop 7 перепробовал все драйверы Nvidia (из репозитория), разрешения 1280х768 нет в принципе!?
alterator-standalone x11 показывает, что такое разрешение видеокарта поддерживает (как будто я сам не знаю!)
xrandr показал, что монитор якобы не поддерживает 1280х768, но это брехня, под WinXP всё работало отлично
Screen 0: minimum 8 x 8, current 1024 x 768, maximum 4096 x 4096
VGA-0 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*+
800x600 72.2 60.3 56.2
640x480 59.9
512x384 60.0
400x300 72.2 60.3 56.3
320x240 60.1
DVI-I-0 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
В логе загрузки пишет:NVIDIA(0): Virtual screen size determined to be 1024 x 768
Меня это не удивило.
Вот var\log\Xorg.0.log целиком[ 28.858]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 28.858] X Protocol Version 11, Revision 0
[ 28.858] Build Operating System: ALT Linux Sisyphus (20081222) i686
[ 28.858] Current Operating System: Linux host-20.localdomain 3.14.41-std-def-alt1 #1 SMP Thu May 7 12:49:34 UTC 2015 i686
[ 28.858] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=e64e9b54-6052-43d5-a038-b7b97858a86d ro vga=0x314 quiet=1 resume=/dev/disk/by-uuid/90031476-0496-4eae-9680-9390b7099078 panic=30 splash
[ 28.858] Build Date: 29 January 2014 10:51:04PM
[ 28.858]
[ 28.858] Current version of pixman: 0.28.2
[ 28.858] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.859] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 21 13:03:18 2015
[ 28.908] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.908] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.909] (==) No Layout section. Using the first Screen section.
[ 28.909] (==) No screen section available. Using defaults.
[ 28.909] (**) |-->Screen "Default Screen Section" (0)
[ 28.909] (**) | |-->Monitor "<default monitor>"
[ 28.909] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 28.909] (**) | |-->Device "Card0"
[ 28.909] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.909] (==) Automatically adding devices
[ 28.909] (==) Automatically enabling devices
[ 28.909] (==) Automatically adding GPU devices
[ 28.909] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 28.909] (==) ModulePath set to "/usr/lib/X11/modules"
[ 28.909] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.910] (II) Loader magic: 0x8263680
[ 28.910] (II) Module ABI versions:
[ 28.910] X.Org ANSI C Emulation: 0.4
[ 28.910] X.Org Video Driver: 14.1
[ 28.910] X.Org XInput driver : 19.1
[ 28.910] X.Org Server Extension : 7.0
[ 28.911] (--) PCI:*(0:1:0:0) 10de:0221:107d:2031 rev 161, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe5000000/16777216, BIOS @ 0x????????/131072
[ 28.911] Initializing built-in extension Generic Event Extension
[ 28.911] Initializing built-in extension SHAPE
[ 28.911] Initializing built-in extension MIT-SHM
[ 28.911] Initializing built-in extension XInputExtension
[ 28.911] Initializing built-in extension XTEST
[ 28.911] Initializing built-in extension BIG-REQUESTS
[ 28.911] Initializing built-in extension SYNC
[ 28.911] Initializing built-in extension XKEYBOARD
[ 28.911] Initializing built-in extension XC-MISC
[ 28.911] Initializing built-in extension SECURITY
[ 28.911] Initializing built-in extension XINERAMA
[ 28.911] Initializing built-in extension XFIXES
[ 28.911] Initializing built-in extension RENDER
[ 28.911] Initializing built-in extension RANDR
[ 28.911] Initializing built-in extension COMPOSITE
[ 28.911] Initializing built-in extension DAMAGE
[ 28.911] Initializing built-in extension MIT-SCREEN-SAVER
[ 28.911] Initializing built-in extension DOUBLE-BUFFER
[ 28.913] Initializing built-in extension RECORD
[ 28.913] Initializing built-in extension DPMS
[ 28.913] Initializing built-in extension X-Resource
[ 28.913] Initializing built-in extension XVideo
[ 28.913] Initializing built-in extension XVideo-MotionCompensation
[ 28.913] Initializing built-in extension SELinux
[ 28.913] Initializing built-in extension XFree86-VidModeExtension
[ 28.913] Initializing built-in extension XFree86-DGA
[ 28.913] Initializing built-in extension XFree86-DRI
[ 28.913] Initializing built-in extension DRI2
[ 28.994] (II) Executed /usr/libexec/X11/drv.d/nvidia
[ 28.994] (II) LoadModule: "glx"
[ 29.025] (II) Loading /usr/lib/X11/modules/extensions/libglx.so
[ 32.344] (II) Module glx: vendor="NVIDIA Corporation"
[ 32.344] compiled for 4.0.2, module version = 1.0.0
[ 32.344] Module class: X.Org Server Extension
[ 32.344] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:21:57 PST 2014
[ 32.344] Loading extension GLX
[ 32.344] (II) LoadModule: "nvidia"
[ 32.356] (II) Loading /usr/lib/X11/modules/drivers/nvidia_drv.so
[ 32.429] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 32.430] compiled for 4.0.2, module version = 1.0.0
[ 32.430] Module class: X.Org Video Driver
[ 32.780] (II) NVIDIA dlloader X Driver 304.125 Mon Dec 1 19:57:42 PST 2014
[ 32.780] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 32.781] (++) using VT number 7
[ 32.792] (II) Loading sub module "fb"
[ 32.792] (II) LoadModule: "fb"
[ 32.792] (II) Loading /usr/lib/X11/modules/libfb.so
[ 32.793] (II) Module fb: vendor="X.Org Foundation"
[ 32.793] compiled for 1.14.5, module version = 1.0.0
[ 32.793] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.793] (II) Loading sub module "wfb"
[ 32.793] (II) LoadModule: "wfb"
[ 32.793] (II) Loading /usr/lib/X11/modules/libwfb.so
[ 32.795] (II) Module wfb: vendor="X.Org Foundation"
[ 32.795] compiled for 1.14.5, module version = 1.0.0
[ 32.795] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.796] (II) Loading sub module "ramdac"
[ 32.796] (II) LoadModule: "ramdac"
[ 32.796] (II) Module "ramdac" already built-in
[ 32.797] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 32.798] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 32.798] (==) NVIDIA(0): RGB weight 888
[ 32.798] (==) NVIDIA(0): Default visual is TrueColor
[ 32.798] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 32.798] (**) NVIDIA(0): Enabling 2D acceleration
[ 33.548] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 33.550] (II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
[ 33.550] (--) NVIDIA(0): Memory: 131072 kBytes
[ 33.550] (--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
[ 33.550] (II) NVIDIA(0): Detected AGP rate: 8X
[ 33.550] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 33.550] (--) NVIDIA(0): Valid display device(s) on GeForce 6200 at PCI:1:0:0
[ 33.550] (--) NVIDIA(0): CRT-0 (connected)
[ 33.550] (--) NVIDIA(0): CRT-1
[ 33.550] (--) NVIDIA(0): TV-0
[ 33.550] (--) NVIDIA(0): DFP-0
[ 33.550] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 33.550] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 33.550] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 33.550] (--) NVIDIA(0): TV encoder: Unknown
[ 33.550] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 33.550] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 33.550] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.550] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 33.550] (**) NVIDIA(0): all display devices.)
[ 33.551] (==) NVIDIA(0):
[ 33.551] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 33.551] (==) NVIDIA(0): will be used as the requested mode.
[ 33.551] (==) NVIDIA(0):
[ 33.551] (II) NVIDIA(0): Validated MetaModes:
[ 33.551] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 33.551] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 33.552] (WW) NVIDIA(0): Unable to support custom viewPortOut 1024 x 576 +0 +96
[ 33.553] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 33.553] (WW) NVIDIA(0): from CRT-0's EDID.
[ 33.553] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 33.553] (--) Depth 24 pixmap format is 32 bpp
[ 33.563] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 33.563] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 33.563] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 33.563] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 33.563] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 33.563] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 33.563] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 33.563] (II) NVIDIA(0): Config Options in the README.
[ 33.563] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 33.671] Loading extension NV-GLX
[ 33.718] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 33.718] (==) NVIDIA(0): Backing store disabled
[ 33.718] (==) NVIDIA(0): Silken mouse enabled
[ 33.719] (==) NVIDIA(0): DPMS enabled
[ 33.719] Loading extension NV-CONTROL
[ 33.720] Loading extension XINERAMA
[ 33.720] (II) Loading sub module "dri2"
[ 33.720] (II) LoadModule: "dri2"
[ 33.720] (II) Module "dri2" already built-in
[ 33.720] (II) NVIDIA(0): [DRI2] Setup complete
[ 33.720] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 33.720] (--) RandR disabled
[ 33.734] (II) SELinux: Disabled on system
[ 33.736] (II) Initializing extension GLX
[ 33.948] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 33.948] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.948] (II) LoadModule: "evdev"
[ 33.958] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so
[ 33.959] (II) Module evdev: vendor="X.Org Foundation"
[ 33.959] compiled for 1.14.0, module version = 2.8.0
[ 33.959] Module class: X.Org XInput Driver
[ 33.959] ABI class: X.Org XInput driver, version 19.1
[ 33.960] (II) Using input driver 'evdev' for 'Power Button'
[ 33.960] (**) Power Button: always reports core events
[ 33.960] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 33.960] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 33.960] (--) evdev: Power Button: Found keys
[ 33.960] (II) evdev: Power Button: Configuring as keyboard
[ 33.960] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 33.960] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 33.960] (**) Option "xkb_rules" "evdev"
[ 33.960] (**) Option "xkb_model" "evdev"
[ 33.960] (**) Option "xkb_layout" "us"
[ 34.018] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 34.018] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 34.018] (II) Using input driver 'evdev' for 'Power Button'
[ 34.018] (**) Power Button: always reports core events
[ 34.018] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 34.018] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 34.018] (--) evdev: Power Button: Found keys
[ 34.018] (II) evdev: Power Button: Configuring as keyboard
[ 34.019] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 34.019] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 34.019] (**) Option "xkb_rules" "evdev"
[ 34.019] (**) Option "xkb_model" "evdev"
[ 34.019] (**) Option "xkb_layout" "us"
[ 34.020] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 34.020] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 34.020] (II) Using input driver 'evdev' for 'Sleep Button'
[ 34.020] (**) Sleep Button: always reports core events
[ 34.020] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 34.020] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 34.020] (--) evdev: Sleep Button: Found keys
[ 34.020] (II) evdev: Sleep Button: Configuring as keyboard
[ 34.020] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 34.020] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 34.020] (**) Option "xkb_rules" "evdev"
[ 34.020] (**) Option "xkb_model" "evdev"
[ 34.020] (**) Option "xkb_layout" "us"
[ 34.021] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 34.021] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 34.022] (II) LoadModule: "modesetting"
[ 34.022] (II) Loading /usr/lib/X11/modules/drivers/modesetting_drv.so
[ 34.023] (II) Module modesetting: vendor="X.Org Foundation"
[ 34.023] compiled for 1.14.5, module version = 0.8.1
[ 34.023] Module class: X.Org Video Driver
[ 34.023] ABI class: X.Org Video Driver, version 14.1
[ 34.023] xf86: found device 0
[ 34.024] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event5)
[ 34.024] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 34.024] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 34.024] (**) PixArt USB Optical Mouse: always reports core events
[ 34.024] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event5"
[ 34.024] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[ 34.024] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[ 34.024] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[ 34.024] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[ 34.024] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[ 34.024] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[ 34.024] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[ 34.024] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 34.024] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 34.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:03.2/usb3/3-1/3-1:1.0/0003:093A:2510.0001/input/input5/event5"
[ 34.024] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 9)
[ 34.025] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[ 34.025] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 34.025] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 34.025] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 34.025] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 34.026] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[ 34.026] (II) No input driver specified, ignoring this device.
[ 34.026] (II) This device may have been added with another device file.
[ 34.026] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 34.027] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 34.027] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 34.027] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 34.027] (**) AT Translated Set 2 keyboard: always reports core events
[ 34.027] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 34.027] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 34.027] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 34.027] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 34.027] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 34.027] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 34.027] (**) Option "xkb_rules" "evdev"
[ 34.027] (**) Option "xkb_model" "evdev"
[ 34.027] (**) Option "xkb_layout" "us"
[ 34.028] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 34.028] (II) No input driver specified, ignoring this device.
[ 34.028] (II) This device may have been added with another device file.
[ 34.077] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[ 34.077] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 34.077] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 34.077] (II) LoadModule: "modesetting"
[ 34.077] (II) Loading /usr/lib/X11/modules/drivers/modesetting_drv.so
[ 34.078] (II) Module modesetting: vendor="X.Org Foundation"
[ 34.078] compiled for 1.14.5, module version = 0.8.1
[ 34.078] Module class: X.Org Video Driver
[ 34.078] ABI class: X.Org Video Driver, version 14.1
[ 34.078] (II) UnloadModule: "modesetting"
[ 34.078] (II) Unloading modesetting
[ 34.078] (II) Failed to load module "modesetting" (already loaded, 135163882)
[ 34.078] xf86: found device 0
[ 148.383] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 148.383] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 148.383] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 148.383] (**) NVIDIA(0): all display devices.)
[ 154.098] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 154.098] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 154.098] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 154.098] (**) NVIDIA(0): all display devices.)
[ 157.104] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 157.104] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 157.104] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 157.104] (**) NVIDIA(0): all display devices.)
[ 17009.915] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 17009.916] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 17009.917] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 17009.917] (**) NVIDIA(0): all display devices.)
Вот /etc/X11/xorg.conf.d/10-monitor.conf# Generated by xsetup
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection
Вот /usr/share/alterator-x11/xorg.conf Section "ServerFlags"
EndSection
Section "ServerLayout"
Identifier "Minimal layout"
Screen "Screen0"
EndSection
Section "Module"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
Section "Device"
Identifier "Card0"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
EndSubSection
EndSection
По адресу /etc/X11/ файла xorg.conf нет. Попытки создать его там ни к чему хорошему не привели, ИБО НЕ ПРОГРАММИСТ Я !
С какой стороны подступиться к этой проблеме? Нужен квалифицированный совет, а то я уже дважды переустанавливал систему.
P.S. Очень надеюсь, что не придётся возвращаться на Windows....