AltLin 7.0.5, Hyper-V, Mate и разрешение экрана

[vita55555]

Файл руками в mc отредактировать.

прошу подсказать - как добраться до командной строки,
моргает черточка и не реагирует не на что,
только на ctrl alt del

[asy]

только на ctrl alt del

А Ctrl+Alt+F1 ? (F2, F3, ..., F6 ещё). И без Ctrl то же самое, если это, вдруг, без xorg.

[ruslandh]

Ну, или с Live образа загрузиться и поправить.

[vita55555]

cat /etc/X11/xorg.conf.d/50-device.conf

нет такого файла или каталога \ после su - \

[vita55555]

Ctrl+Alt+F1

помогло 

[ruslandh]

Ну и не обязан быть такой именно файл

[vita55555]

Ну и не обязан быть такой именно файл

Удалил файл 10-monitor.conf и иксы заработали
как написано тут:
https://forum.altlinux.org/index.php?topic=31003.0

[vita55555]

теперь разрешение 800 на 600 
/var/log/Xorg.0.log

Спойлер

[    31.998]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[    31.999] X Protocol Version 11, Revision 0
[    31.999] Build Operating System: ALT Linux Sisyphus (20081222) x86_64
[    31.999] Current Operating System: Linux jaconda.localdomain 3.4.96-led-ws-alt0.M70P.1 #1 SMP PREEMPT Wed Jul 2 12:53:23 UTC 2014 x86_64
[    31.999] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=ee7d8d1f-82f5-44e2-b864-9aa92ff2969e ro vga=0x314 quiet=1 resume=/dev/disk/by-uuid/75ebf51b-5575-452f-bc21-7b71491f0cb7 panic=30 splash
[    31.999] Build Date: 29 January 2014  10:51:02PM
[    31.999] 
[    31.999] Current version of pixman: 0.28.2
[    31.999]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    31.999] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.999] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 30 22:52:09 2015
[    32.042] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    32.042] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    32.207] (==) No Layout section.  Using the first Screen section.
[    32.207] (**) |-->Screen "Screen0" (0)
[    32.207] (**) |   |-->Monitor "Monitor0"
[    32.207] (**) |   |-->Device "Card0"
[    32.207] (==) Automatically adding devices
[    32.207] (==) Automatically enabling devices
[    32.207] (==) Automatically adding GPU devices
[    32.207] (==) FontPath set to:
   catalogue:/etc/X11/fontpath.d
[    32.207] (==) ModulePath set to "/usr/lib64/X11/modules"
[    32.207] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    32.218] (II) Loader magic: 0x801ce0
[    32.218] (II) Module ABI versions:
[    32.218]    X.Org ANSI C Emulation: 0.4
[    32.218]    X.Org Video Driver: 14.1
[    32.218]    X.Org XInput driver : 19.1
[    32.218]    X.Org Server Extension : 7.0
[    32.223] (--) PCI:*(0:0:8:0) 1414:5353:0000:0000 rev 0, Mem @ 0xf8000000/67108864
[    32.228] Initializing built-in extension Generic Event Extension
[    32.228] Initializing built-in extension SHAPE
[    32.228] Initializing built-in extension MIT-SHM
[    32.228] Initializing built-in extension XInputExtension
[    32.228] Initializing built-in extension XTEST
[    32.228] Initializing built-in extension BIG-REQUESTS
[    32.228] Initializing built-in extension SYNC
[    32.228] Initializing built-in extension XKEYBOARD
[    32.228] Initializing built-in extension XC-MISC
[    32.228] Initializing built-in extension SECURITY
[    32.228] Initializing built-in extension XINERAMA
[    32.228] Initializing built-in extension XFIXES
[    32.228] Initializing built-in extension RENDER
[    32.228] Initializing built-in extension RANDR
[    32.228] Initializing built-in extension COMPOSITE
[    32.228] Initializing built-in extension DAMAGE
[    32.228] Initializing built-in extension MIT-SCREEN-SAVER
[    32.228] Initializing built-in extension DOUBLE-BUFFER
[    32.228] Initializing built-in extension RECORD
[    32.228] Initializing built-in extension DPMS
[    32.228] Initializing built-in extension X-Resource
[    32.228] Initializing built-in extension XVideo
[    32.228] Initializing built-in extension XVideo-MotionCompensation
[    32.228] Initializing built-in extension SELinux
[    32.228] Initializing built-in extension XFree86-VidModeExtension
[    32.228] Initializing built-in extension XFree86-DGA
[    32.228] Initializing built-in extension XFree86-DRI
[    32.228] Initializing built-in extension DRI2
[    32.228] (==) Matched modesetting as autoconfigured driver 0
[    32.228] (==) Matched fbdev as autoconfigured driver 1
[    32.228] (==) Matched vesa as autoconfigured driver 2
[    32.228] (==) Assigned the driver to the xf86ConfigLayout
[    32.394] (II) Executed /usr/libexec/X11/drv.d/x11
[    32.394] (II) LoadModule: "glx"
[    32.469] (II) Loading /usr/lib64/X11/modules/extensions/libglx.so
[    32.518] (II) Module glx: vendor="X.Org Foundation"
[    32.518]    compiled for 1.14.5, module version = 1.0.0
[    32.518]    ABI class: X.Org Server Extension, version 7.0
[    32.518] (==) AIGLX enabled
[    32.518] Loading extension GLX
[    32.518] (II) LoadModule: "modesetting"
[    32.724] (II) Loading /usr/lib64/X11/modules/drivers/modesetting_drv.so
[    32.775] (II) Module modesetting: vendor="X.Org Foundation"
[    32.776]    compiled for 1.14.5, module version = 0.8.1
[    32.776]    Module class: X.Org Video Driver
[    32.776]    ABI class: X.Org Video Driver, version 14.1
[    32.776] (II) LoadModule: "fbdev"
[    32.776] (II) Loading /usr/lib64/X11/modules/drivers/fbdev_drv.so
[    32.792] (II) Module fbdev: vendor="X.Org Foundation"
[    32.792]    compiled for 1.14.0, module version = 0.4.3
[    32.792]    Module class: X.Org Video Driver
[    32.792]    ABI class: X.Org Video Driver, version 14.1
[    32.792] (II) LoadModule: "vesa"
[    32.792] (II) Loading /usr/lib64/X11/modules/drivers/vesa_drv.so
[    32.806] (II) Module vesa: vendor="X.Org Foundation"
[    32.806]    compiled for 1.14.0, module version = 2.3.2
[    32.806]    Module class: X.Org Video Driver
[    32.806]    ABI class: X.Org Video Driver, version 14.1
[    32.806] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    32.806] (II) FBDEV: driver for framebuffer: fbdev
[    32.806] (II) VESA: driver for VESA chipsets: vesa
[    32.806] (++) using VT number 7

[    32.806] (EE) open /dev/dri/card0: No such file or directory
[    32.806] (WW) Falling back to old probe method for modesetting
[    32.806] (EE) open /dev/dri/card0: No such file or directory
[    32.806] (II) Loading sub module "fbdevhw"
[    32.806] (II) LoadModule: "fbdevhw"
[    32.807] (II) Loading /usr/lib64/X11/modules/libfbdevhw.so
[    32.840] (II) Module fbdevhw: vendor="X.Org Foundation"
[    32.840]    compiled for 1.14.5, module version = 0.0.2
[    32.840]    ABI class: X.Org Video Driver, version 14.1
[    32.840] (**) FBDEV(1): claimed PCI slot 0@0:8:0
[    32.840] (II) FBDEV(1): using default device
[    32.840] (WW) Falling back to old probe method for vesa
[    32.840] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    32.840] (EE) Screen 0 deleted because of no matching config section.
[    32.840] (II) UnloadModule: "modesetting"
[    32.840] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    32.840] (==) FBDEV(0): RGB weight 565
[    32.840] (==) FBDEV(0): Default visual is TrueColor
[    32.840] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    32.840] (II) FBDEV(0): hardware: VESA VGA (video memory: 960kB)
[    32.840] (II) FBDEV(0): checking modes against framebuffer device...
[    32.840] (II) FBDEV(0):    mode "1680x1050" not found
[    32.840] (II) FBDEV(0): checking modes against monitor...
[    32.840] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)
[    32.840] (**) FBDEV(0):  Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
[    32.840] (II) FBDEV(0): Modeline "current"x0.0   48.00  800 832 928 1024  600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[    32.840] (==) FBDEV(0): DPI set to (96, 96)
[    32.840] (II) Loading sub module "fb"
[    32.840] (II) LoadModule: "fb"
[    32.840] (II) Loading /usr/lib64/X11/modules/libfb.so
[    32.855] (II) Module fb: vendor="X.Org Foundation"
[    32.855]    compiled for 1.14.5, module version = 1.0.0
[    32.855]    ABI class: X.Org ANSI C Emulation, version 0.4
[    32.856] (**) FBDEV(0): using shadow framebuffer
[    32.856] (II) Loading sub module "shadow"
[    32.856] (II) LoadModule: "shadow"
[    32.856] (II) Loading /usr/lib64/X11/modules/libshadow.so
[    32.864] (II) Module shadow: vendor="X.Org Foundation"
[    32.864]    compiled for 1.14.5, module version = 1.1.0
[    32.864]    ABI class: X.Org ANSI C Emulation, version 0.4
[    32.864] (II) UnloadModule: "vesa"
[    32.864] (II) Unloading vesa
[    32.865] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    32.918] (==) FBDEV(0): Backing store disabled
[    32.920] (==) FBDEV(0): DPMS enabled
[    32.920] (==) RandR enabled
[    32.941] (II) SELinux: Disabled on system
[    32.962] (II) AIGLX: Screen 0 is not DRI2 capable
[    32.962] (II) AIGLX: Screen 0 is not DRI capable
[    33.129] (II) AIGLX: Loaded and initialized swrast
[    33.129] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    34.390] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    34.390] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.390] (II) LoadModule: "evdev"
[    34.390] (II) Loading /usr/lib64/X11/modules/input/evdev_drv.so
[    34.407] (II) Module evdev: vendor="X.Org Foundation"
[    34.407]    compiled for 1.14.0, module version = 2.8.0
[    34.407]    Module class: X.Org XInput Driver
[    34.407]    ABI class: X.Org XInput driver, version 19.1
[    34.407] (II) Using input driver 'evdev' for 'Power Button'
[    34.407] (**) Power Button: always reports core events
[    34.407] (**) evdev: Power Button: Device: "/dev/input/event0"
[    34.407] (--) evdev: Power Button: Vendor 0 Product 0x1
[    34.407] (--) evdev: Power Button: Found keys
[    34.407] (II) evdev: Power Button: Configuring as keyboard
[    34.407] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[    34.407] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    34.407] (**) Option "xkb_rules" "evdev"
[    34.407] (**) Option "xkb_model" "evdev"
[    34.407] (**) Option "xkb_layout" "us"
[    34.429] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[    34.429] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.429] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[    34.429] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.429] (**) AT Translated Set 2 keyboard: always reports core events
[    34.429] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[    34.429] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    34.429] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    34.429] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    34.429] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[    34.429] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7)
[    34.429] (**) Option "xkb_rules" "evdev"
[    34.429] (**) Option "xkb_model" "evdev"
[    34.429] (**) Option "xkb_layout" "us"
[    34.429] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event4)
[    34.429] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    34.429] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint"
[    34.429] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    34.429] (**) TPPS/2 IBM TrackPoint: always reports core events
[    34.429] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event4"
[    34.429] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    34.429] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    34.429] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    34.429] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    34.429] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    34.429] (**) Option "EmulateWheel" "true"
[    34.429] (**) Option "EmulateWheelButton" "2"
[    34.429] (**) Option "EmulateWheelInertia" "10"
[    34.429] (**) Option "EmulateWheelTimeout" "200"
[    34.429] (**) Option "YAxisMapping" "4 5"
[    34.429] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    34.429] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.429] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[    34.429] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 8)
[    34.430] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    34.430] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    34.430] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    34.430] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    34.430] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    34.430] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    34.430] (II) No input driver specified, ignoring this device.
[    34.430] (II) This device may have been added with another device file.
[    34.430] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[    34.430] (II) No input driver specified, ignoring this device.
[    34.430] (II) This device may have been added with another device file.
[    34.430] (II) config/udev: Adding input device Microsoft Vmbus HID-compliant Mouse (/dev/input/event2)
[    34.430] (**) Microsoft Vmbus HID-compliant Mouse: Applying InputClass "evdev pointer catchall"
[    34.430] (II) Using input driver 'evdev' for 'Microsoft Vmbus HID-compliant Mouse'
[    34.430] (**) Microsoft Vmbus HID-compliant Mouse: always reports core events
[    34.430] (**) evdev: Microsoft Vmbus HID-compliant Mouse: Device: "/dev/input/event2"
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Vendor 0x45e Product 0x621
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Found 9 mouse buttons
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Found scroll wheel(s)
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Found relative axes
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Found absolute axes
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Found x and y absolute axes
[    34.430] (--) evdev: Microsoft Vmbus HID-compliant Mouse: Found absolute touchscreen
[    34.430] (II) evdev: Microsoft Vmbus HID-compliant Mouse: Configuring as touchscreen
[    34.430] (II) evdev: Microsoft Vmbus HID-compliant Mouse: Adding scrollwheel support
[    34.430] (**) evdev: Microsoft Vmbus HID-compliant Mouse: YAxisMapping: buttons 4 and 5
[    34.430] (**) evdev: Microsoft Vmbus HID-compliant Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    34.430] (**) Option "config_info" "udev:/sys/devices/virtual/input/input2/event2"
[    34.430] (II) XINPUT: Adding extended input device "Microsoft Vmbus HID-compliant Mouse" (type: TOUCHSCREEN, id 9)
[    34.430] (WW) evdev: Microsoft Vmbus HID-compliant Mouse: touchpads, tablets and touchscreens ignore relative axes.
[    34.431] (II) evdev: Microsoft Vmbus HID-compliant Mouse: initialized for absolute axes.
[    34.431] (**) Microsoft Vmbus HID-compliant Mouse: (accel) keeping acceleration scheme 1
[    34.431] (**) Microsoft Vmbus HID-compliant Mouse: (accel) acceleration profile 0
[    34.431] (**) Microsoft Vmbus HID-compliant Mouse: (accel) acceleration factor: 2.000
[    34.431] (**) Microsoft Vmbus HID-compliant Mouse: (accel) acceleration threshold: 4
[    34.431] (II) config/udev: Adding input device Microsoft Vmbus HID-compliant Mouse (/dev/input/mouse0)
[    34.431] (II) No input driver specified, ignoring this device.
[    34.431] (II) This device may have been added with another device file.
[    34.435] (EE) FBDEV(0): FBIOBLANK: Invalid argument

[yaleks]

ХЗ, попробуйте http://blogs.msdn.com/b/virtual_pc_guy/archive/2014/09/19/changing-ubuntu-screen-resolution-in-a-hyper-v-vm.aspx только без sudo

[vita55555]

ХЗ, попробуйте http://blogs.msdn.com/b/virtual_pc_guy/archive/2014/09/19/changing-ubuntu-screen-resolution-in-a-hyper-v-vm.aspx только без sudo

Cпасибо, сделал, сейчас вроде разрешение 1152x864,
посмотрел лог, я там понимаю драйвер VESA прикрутился...
как нить 1680 на 1050 можно еще поднять ?

Код: [Выделить]

[   192.175]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[   192.175] X Protocol Version 11, Revision 0
[   192.175] Build Operating System: ALT Linux Sisyphus (20081222) x86_64
[   192.175] Current Operating System: Linux jaconda.localdomain 3.4.96-led-ws-alt0.M70P.1 #1 SMP PREEMPT Wed Jul 2 12:53:23 UTC 2014 x86_64
[   192.175] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=ee7d8d1f-82f5-44e2-b864-9aa92ff2969e ro quiet splash video=hyperv_fb:1680x1050
[   192.175] Build Date: 29 January 2014  10:51:02PM
[   192.175] 
[   192.175] Current version of pixman: 0.28.2
[   192.175] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[   192.175] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   192.175] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 31 01:10:38 2015
[   192.176] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   192.176] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   192.176] (==) No Layout section.  Using the first Screen section.
[   192.176] (==) No screen section available. Using defaults.
[   192.176] (**) |-->Screen "Default Screen Section" (0)
[   192.176] (**) |   |-->Monitor "<default monitor>"
[   192.176] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[   192.176] (==) Automatically adding devices
[   192.176] (==) Automatically enabling devices
[   192.176] (==) Automatically adding GPU devices
[   192.176] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[   192.176] (==) ModulePath set to "/usr/lib64/X11/modules"
[   192.176] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[   192.176] (II) Loader magic: 0x801ce0
[   192.176] (II) Module ABI versions:
[   192.176] X.Org ANSI C Emulation: 0.4
[   192.176] X.Org Video Driver: 14.1
[   192.176] X.Org XInput driver : 19.1
[   192.176] X.Org Server Extension : 7.0
[   192.184] (--) PCI:*(0:0:8:0) 1414:5353:0000:0000 rev 0, Mem @ 0xf8000000/67108864
[   192.184] Initializing built-in extension Generic Event Extension
[   192.184] Initializing built-in extension SHAPE
[   192.184] Initializing built-in extension MIT-SHM
[   192.184] Initializing built-in extension XInputExtension
[   192.184] Initializing built-in extension XTEST
[   192.184] Initializing built-in extension BIG-REQUESTS
[   192.184] Initializing built-in extension SYNC
[   192.184] Initializing built-in extension XKEYBOARD
[   192.184] Initializing built-in extension XC-MISC
[   192.184] Initializing built-in extension SECURITY
[   192.184] Initializing built-in extension XINERAMA
[   192.184] Initializing built-in extension XFIXES
[   192.184] Initializing built-in extension RENDER
[   192.184] Initializing built-in extension RANDR
[   192.184] Initializing built-in extension COMPOSITE
[   192.184] Initializing built-in extension DAMAGE
[   192.184] Initializing built-in extension MIT-SCREEN-SAVER
[   192.184] Initializing built-in extension DOUBLE-BUFFER
[   192.184] Initializing built-in extension RECORD
[   192.184] Initializing built-in extension DPMS
[   192.184] Initializing built-in extension X-Resource
[   192.184] Initializing built-in extension XVideo
[   192.184] Initializing built-in extension XVideo-MotionCompensation
[   192.184] Initializing built-in extension SELinux
[   192.184] Initializing built-in extension XFree86-VidModeExtension
[   192.184] Initializing built-in extension XFree86-DGA
[   192.184] Initializing built-in extension XFree86-DRI
[   192.184] Initializing built-in extension DRI2
[   192.184] (==) Matched modesetting as autoconfigured driver 0
[   192.184] (==) Matched fbdev as autoconfigured driver 1
[   192.184] (==) Matched vesa as autoconfigured driver 2
[   192.184] (==) Assigned the driver to the xf86ConfigLayout
[   192.185] (II) Executed /usr/libexec/X11/drv.d/x11
[   192.185] (II) LoadModule: "glx"
[   192.185] (II) Loading /usr/lib64/X11/modules/extensions/libglx.so
[   192.185] (II) Module glx: vendor="X.Org Foundation"
[   192.185] compiled for 1.14.5, module version = 1.0.0
[   192.185] ABI class: X.Org Server Extension, version 7.0
[   192.185] (==) AIGLX enabled
[   192.185] Loading extension GLX
[   192.185] (II) LoadModule: "modesetting"
[   192.186] (II) Loading /usr/lib64/X11/modules/drivers/modesetting_drv.so
[   192.186] (II) Module modesetting: vendor="X.Org Foundation"
[   192.186] compiled for 1.14.5, module version = 0.8.1
[   192.186] Module class: X.Org Video Driver
[   192.186] ABI class: X.Org Video Driver, version 14.1
[   192.186] (II) LoadModule: "fbdev"
[   192.186] (II) Loading /usr/lib64/X11/modules/drivers/fbdev_drv.so
[   192.186] (II) Module fbdev: vendor="X.Org Foundation"
[   192.186] compiled for 1.14.0, module version = 0.4.3
[   192.186] Module class: X.Org Video Driver
[   192.186] ABI class: X.Org Video Driver, version 14.1
[   192.186] (II) LoadModule: "vesa"
[   192.186] (II) Loading /usr/lib64/X11/modules/drivers/vesa_drv.so
[   192.186] (II) Module vesa: vendor="X.Org Foundation"
[   192.186] compiled for 1.14.0, module version = 2.3.2
[   192.186] Module class: X.Org Video Driver
[   192.186] ABI class: X.Org Video Driver, version 14.1
[   192.186] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   192.186] (II) FBDEV: driver for framebuffer: fbdev
[   192.186] (II) VESA: driver for VESA chipsets: vesa
[   192.186] (++) using VT number 7

[   192.187] (EE) open /dev/dri/card0: No such file or directory
[   192.187] (WW) Falling back to old probe method for modesetting
[   192.187] (EE) open /dev/dri/card0: No such file or directory
[   192.187] (II) Loading sub module "fbdevhw"
[   192.187] (II) LoadModule: "fbdevhw"
[   192.187] (II) Loading /usr/lib64/X11/modules/libfbdevhw.so
[   192.187] (II) Module fbdevhw: vendor="X.Org Foundation"
[   192.187] compiled for 1.14.5, module version = 0.0.2
[   192.187] ABI class: X.Org Video Driver, version 14.1
[   192.187] (EE) open /dev/fb0: No such file or directory
[   192.187] (WW) Falling back to old probe method for fbdev
[   192.187] (II) Loading sub module "fbdevhw"
[   192.187] (II) LoadModule: "fbdevhw"
[   192.187] (II) Loading /usr/lib64/X11/modules/libfbdevhw.so
[   192.187] (II) Module fbdevhw: vendor="X.Org Foundation"
[   192.187] compiled for 1.14.5, module version = 0.0.2
[   192.187] ABI class: X.Org Video Driver, version 14.1
[   192.187] (EE) open /dev/fb0: No such file or directory
[   192.187] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   192.187] (EE) Screen 0 deleted because of no matching config section.
[   192.187] (II) UnloadModule: "modesetting"
[   192.187] (EE) Screen 0 deleted because of no matching config section.
[   192.187] (II) UnloadModule: "fbdev"
[   192.187] (II) UnloadSubModule: "fbdevhw"
[   192.187] (II) Loading sub module "vbe"
[   192.187] (II) LoadModule: "vbe"
[   192.187] (II) Loading /usr/lib64/X11/modules/libvbe.so
[   192.187] (II) Module vbe: vendor="X.Org Foundation"
[   192.187] compiled for 1.14.5, module version = 1.1.0
[   192.187] ABI class: X.Org Video Driver, version 14.1
[   192.187] (II) Loading sub module "int10"
[   192.187] (II) LoadModule: "int10"
[   192.187] (II) Loading /usr/lib64/X11/modules/libint10.so
[   192.187] (II) Module int10: vendor="X.Org Foundation"
[   192.187] compiled for 1.14.5, module version = 1.0.0
[   192.187] ABI class: X.Org Video Driver, version 14.1
[   192.187] (II) VESA(0): initializing int10
[   192.188] (II) VESA(0): Bad V_BIOS checksum
[   192.188] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[   192.188] (II) VESA(0): VESA BIOS detected
[   192.188] (II) VESA(0): VESA VBE Version 2.0
[   192.188] (II) VESA(0): VESA VBE Total Mem: 4096 kB
[   192.188] (II) VESA(0): VESA VBE OEM: IBM SVGA BIOS, (C) 1993 International Business Machines
[   192.188] (II) VESA(0): VESA VBE OEM Software Rev: 0.0
[   192.289] (II) VESA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[   192.289] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[   192.289] (==) VESA(0): RGB weight 888
[   192.289] (==) VESA(0): Default visual is TrueColor
[   192.289] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[   192.289] (II) Loading sub module "ddc"
[   192.289] (II) LoadModule: "ddc"
[   192.289] (II) Module "ddc" already built-in
[   192.289] (II) VESA(0): VESA VBE DDC supported
[   192.289] (II) VESA(0): VESA VBE DDC Level none
[   192.289] (II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
[   192.289] (II) VESA(0): VESA VBE DDC read successfully
[   192.289] (II) VESA(0): Manufacturer: RYI  Model: 1  Serial#: 1
[   192.289] (II) VESA(0): Year: 2007  Week: 29
[   192.289] (II) VESA(0): EDID Version: 1.3
[   192.289] (II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   192.289] (II) VESA(0): Sync:  Separate
[   192.289] (II) VESA(0): Max Image Size [cm]: horiz.: 36  vert.: 27
[   192.289] (II) VESA(0): Gamma: 3.03
[   192.289] (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   192.289] (II) VESA(0): Default color space is primary color space
[   192.289] (II) VESA(0): First detailed timing is preferred mode
[   192.289] (II) VESA(0): redX: 0.638 redY: 0.327   greenX: 0.280 greenY: 0.602
[   192.289] (II) VESA(0): blueX: 0.142 blueY: 0.063   whiteX: 0.283 whiteY: 0.297
[   192.289] (II) VESA(0): Supported established timings:
[   192.289] (II) VESA(0): 720x400@70Hz
[   192.289] (II) VESA(0): 720x400@88Hz
[   192.289] (II) VESA(0): 640x480@60Hz
[   192.289] (II) VESA(0): 640x480@67Hz
[   192.289] (II) VESA(0): 640x480@72Hz
[   192.289] (II) VESA(0): 640x480@75Hz
[   192.289] (II) VESA(0): 800x600@56Hz
[   192.289] (II) VESA(0): 800x600@60Hz
[   192.289] (II) VESA(0): 800x600@72Hz
[   192.289] (II) VESA(0): 800x600@75Hz
[   192.289] (II) VESA(0): 832x624@75Hz
[   192.289] (II) VESA(0): 1024x768@87Hz (interlaced)
[   192.289] (II) VESA(0): 1024x768@60Hz
[   192.289] (II) VESA(0): 1024x768@70Hz
[   192.289] (II) VESA(0): 1024x768@75Hz
[   192.289] (II) VESA(0): 1280x1024@75Hz
[   192.289] (II) VESA(0): 1152x864@75Hz
[   192.289] (II) VESA(0): Manufacturer's mask: 0
[   192.289] (II) VESA(0): Supported standard timings:
[   192.289] (II) VESA(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
[   192.289] (II) VESA(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
[   192.289] (II) VESA(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
[   192.289] (II) VESA(0): #3: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
[   192.289] (II) VESA(0): #4: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
[   192.289] (II) VESA(0): #5: hsize: 1920  vsize 1440  refresh: 60  vid: 16593
[   192.289] (II) VESA(0): Supported detailed timing:
[   192.289] (II) VESA(0): clock: 202.5 MHz   Image Size:  360 x 270 mm
[   192.289] (II) VESA(0): h_active: 800  h_sync: 864  h_sync_end 1056 h_blank_end 1360 h_border: 0
[   192.289] (II) VESA(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 650 v_border: 0
[   192.289] (II) VESA(0): Serial No:  AGNIESZKA 01
[   192.289] (II) VESA(0): Monitor name: RYI 109-B5
[   192.289] (II) VESA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 97 kHz, PixClock max 245 MHz
[   192.289] (II) VESA(0): EDID (in hex):
[   192.289] (II) VESA(0): 00ffffffffffff004b29010001000000
[   192.289] (II) VESA(0): 1d11010368241bcbee7c58a353479a24
[   192.289] (II) VESA(0): 10484cffff803159455961598199a94f
[   192.289] (II) VESA(0): d140010101011a4f20303258322040c0
[   192.289] (II) VESA(0): 1300680e1100001e000000ff00204147
[   192.289] (II) VESA(0): 4e4945535a4b41203031000000fc0052
[   192.289] (II) VESA(0): 5949203130392d42350a2020000000fd
[   192.289] (II) VESA(0): 0032a01e6118000a20202020202000b2
[   192.289] (II) VESA(0): EDID vendor "RYI", prod id 1
[   192.289] (II) VESA(0): Using EDID range info for horizontal sync
[   192.289] (II) VESA(0): Using EDID range info for vertical refresh
[   192.289] (II) VESA(0): Printing DDC gathered Modelines:
[   192.289] (II) VESA(0): Modeline "800x600"x0.0  202.50  800 864 1056 1360  600 601 604 650 +hsync +vsync (148.9 kHz eP)
[   192.289] (II) VESA(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   192.289] (II) VESA(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   192.289] (II) VESA(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   192.290] (II) VESA(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   192.290] (II) VESA(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   192.290] (II) VESA(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   192.290] (II) VESA(0): Modeline "720x400"x0.0   35.50  720 738 846 900  400 421 423 449 -hsync -vsync (39.4 kHz e)
[   192.290] (II) VESA(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   192.290] (II) VESA(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   192.290] (II) VESA(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   192.290] (II) VESA(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   192.290] (II) VESA(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   192.290] (II) VESA(0): Modeline "1024x768i"x0.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz e)
[   192.290] (II) VESA(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   192.290] (II) VESA(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   192.290] (II) VESA(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   192.290] (II) VESA(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   192.290] (II) VESA(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   192.290] (II) VESA(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   192.290] (II) VESA(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[   192.290] (II) VESA(0): Modeline "1280x1024"x0.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[   192.290] (II) VESA(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz e)
[   192.290] (II) VESA(0): Modeline "1920x1440"x0.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[   192.290] (II) VESA(0): Searching for matching VESA mode(s):
[   192.297] Mode: 100 (640x400)
[   192.297] ModeAttributes: 0x9b
[   192.297] WinAAttributes: 0x7
[   192.297] WinBAttributes: 0x0
[   192.297] WinGranularity: 64
[   192.297] WinSize: 64
[   192.297] WinASegment: 0xa000
[   192.297] WinBSegment: 0x0
[   192.297] WinFuncPtr: 0xc8001cf8
[   192.297] BytesPerScanline: 640
[   192.297] XResolution: 640
[   192.297] YResolution: 400
[   192.297] XCharSize: 8
[   192.297] YCharSize: 16
[   192.297] NumberOfPlanes: 1
[   192.297] BitsPerPixel: 8
[   192.297] NumberOfBanks: 1
[   192.297] MemoryModel: 4
[   192.297] BankSize: 0
[   192.297] NumberOfImages: 0
[   192.297] RedMaskSize: 0
[   192.297] RedFieldPosition: 0
[   192.297] GreenMaskSize: 0
[   192.297] GreenFieldPosition: 0
[   192.297] BlueMaskSize: 0
[   192.297] BlueFieldPosition: 0
[   192.297] RsvdMaskSize: 0
[   192.297] RsvdFieldPosition: 0
[   192.297] DirectColorModeInfo: 0
[   192.297] PhysBasePtr: 0xf8000000
вырезано
[   192.406] (II) VESA(0): Total Memory: 64 64KB banks (4096kB)
[   192.406] (II) VESA(0): <default monitor>: Using hsync range of 30.00-97.00 kHz
[   192.406] (II) VESA(0): <default monitor>: Using vrefresh range of 50.00-160.00 Hz
[   192.406] (II) VESA(0): <default monitor>: Using maximum pixel clock of 245.00 MHz
[   192.406] (WW) VESA(0): Unable to estimate virtual size
[   192.406] (II) VESA(0): Not using built-in mode "1152x768" (no mode of this name)
[   192.406] (II) VESA(0): Not using built-in mode "896x600" (no mode of this name)
[   192.406] (II) VESA(0): Not using built-in mode "800x512" (no mode of this name)
[   192.406] (II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
[   192.406] (--) VESA(0): Virtual size is 1152x864 (pitch 1152)
[   192.406] (**) VESA(0): *Built-in mode "1152x864"
[   192.406] (**) VESA(0): *Built-in mode "1024x768"
[   192.406] (**) VESA(0): *Built-in mode "800x600"
[   192.406] (**) VESA(0): *Built-in mode "640x480"
[   192.406] (**) VESA(0): Display dimensions: (360, 270) mm
[   192.406] (**) VESA(0): DPI set to (81, 81)
[   192.406] (**) VESA(0): Using "Shadow Framebuffer"
[   192.406] (II) Loading sub module "shadow"
[   192.406] (II) LoadModule: "shadow"
[   192.406] (II) Loading /usr/lib64/X11/modules/libshadow.so
[   192.406] (II) Module shadow: vendor="X.Org Foundation"
[   192.406] compiled for 1.14.5, module version = 1.1.0
[   192.406] ABI class: X.Org ANSI C Emulation, version 0.4
[   192.406] (II) Loading sub module "fb"
[   192.406] (II) LoadModule: "fb"
[   192.407] (II) Loading /usr/lib64/X11/modules/libfb.so
[   192.407] (II) Module fb: vendor="X.Org Foundation"
[   192.407] compiled for 1.14.5, module version = 1.0.0
[   192.407] ABI class: X.Org ANSI C Emulation, version 0.4
[   192.407] (==) Depth 24 pixmap format is 32 bpp
[   192.407] (II) Loading sub module "int10"
[   192.407] (II) LoadModule: "int10"
[   192.407] (II) Loading /usr/lib64/X11/modules/libint10.so
[   192.407] (II) Module int10: vendor="X.Org Foundation"
[   192.407] compiled for 1.14.5, module version = 1.0.0
[   192.407] ABI class: X.Org Video Driver, version 14.1
[   192.407] (II) VESA(0): initializing int10
[   192.407] (II) VESA(0): Bad V_BIOS checksum
[   192.407] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[   192.407] (II) VESA(0): VESA BIOS detected
[   192.407] (II) VESA(0): VESA VBE Version 2.0
[   192.407] (II) VESA(0): VESA VBE Total Mem: 4096 kB
[   192.407] (II) VESA(0): VESA VBE OEM: IBM SVGA BIOS, (C) 1993 International Business Machines
[   192.407] (II) VESA(0): VESA VBE OEM Software Rev: 0.0
[   192.408] (II) VESA(0): virtual address = 0x7f0a25768000,
physical address = 0xf8000000, size = 4194304
[   192.722] (II) VESA(0): Setting up VESA Mode 0x20B (1152x864)
[   192.722] (II) VESA(0): VBESetVBEMode failed, mode set without customized refresh.
[   192.752] (==) VESA(0): Default visual is TrueColor
[   192.752] (==) VESA(0): Backing store disabled
[   192.752] (==) VESA(0): DPMS enabled
[   192.752] (==) RandR enabled
[   192.756] (II) SELinux: Disabled on system
[   192.757] (II) AIGLX: Screen 0 is not DRI2 capable
[   192.757] (II) AIGLX: Screen 0 is not DRI capable
[   192.761] (II) AIGLX: Loaded and initialized swrast
[   192.761] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   192.798] (II) config/udev: Adding input device Power Button (/dev/input/event0)



[ruslandh]

Вот тут по теме

Принудительный режим и EDID

[ruslandh]

"Написал на коленке" про режимы fbdev, если есть желающие поправить и открректировать - добро пожаловать.
https://www.altlinux.org/Режимы_работы_фреймбуфера