USB модемы в Альт Линукс Школьный.

[Spinoza]

Ну да, можно конечно извращаться над модемом как угодно...

Почему извращаться? Я имею именно такой модем. И как раз по этой инструкции отключил эмуляцию CD  и поддержку Micro SD. После чего модем прекрасно определяется Линуксом и работает с ним. В качестве звонилки использую KPPP.
Мне кажется для новичка это лучший вариант http://rus-linux.net/nlib.php?name=/MyLDP/internet/modem-ru.html

У меня такой модем. В нём стоит флешка, которой я пользуюсь. Зачем лишаться этой возможности? Зачем замарачиваться гипертерминалом или миникомом, кастрировать по сути устройство. Для чего? Неужели это легче чем прописать одно маленькое правило?

[push87]

Код: [Выделить]

[admin@comp-Celeron-CPU-d69ecb ~]$ su -
Password:
[root@comp-Celeron-CPU-d69ecb ~]# echo 'SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1",
 RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1 --product 0x1446 --type option-zerocd"' | tee
 /etc/udev/rules.d/45-huawei1550.rules
SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1
 --product 0x1446 --type option-zerocd"
[root@comp-Celeron-CPU-d69ecb ~]#
[root@comp-Celeron-CPU-d69ecb ~]# cat /etc/udev/rules.d/45-huawei1550.rules
SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1
 --product 0x1446 --type option-zerocd"
[root@comp-Celeron-CPU-d69ecb ~]#

Что это означает и что делать дальше.

[Spinoza]

Теперь необходимо убедиться, что модем цепляется. Для этого запустите терминал и от рута выполните

Код: [Выделить]

tail -f /var/log/messages и подключите модем. А всё, что будет в терминале, скопируйте сюда. Если модем подцепился, то в Network Manager будет активна строка "Новое мобильное соединение".

[push87]

Код: [Выделить]

[admin@comp-Celeron-CPU-d69ecb ~]$ su -
Password:
[root@comp-Celeron-CPU-d69ecb ~]# tail -f /var/log/messages
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb kernel: [  687.846875] option1 ttyUSB0: GSM modem (1-port) converter now
 disconnected from ttyUSB0
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb kernel: [  687.846891] option 5-2:1.0: device disconnected
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb kernel: [  687.847124] option1 ttyUSB1: GSM modem (1-port) converter now
 disconnected from ttyUSB1
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb kernel: [  687.847137] option 5-2:1.1: device disconnected
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb kernel: [  687.847359] option1 ttyUSB2: GSM modem (1-port) converter now
 disconnected from ttyUSB2
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb kernel: [  687.847372] option 5-2:1.2: device disconnected
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): now unmanaged  
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): device state change: 3 -> 1 (reason 36)
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): cleaning up...
Jul 29 11:18:43 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): taking down device.  
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.428518] usb 5-2: new high speed USB device using ehci_hcd and address 7
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.571252] usb 5-2: New USB device found, idVendor=12d1, idProduct=1446
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.571258] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.571262] usb 5-2: Product: HUAWEI Mobile
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.571266] usb 5-2: Manufacturer: HUAWEI Technology
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.571437] usb 5-2: configuration #1 chosen from 1 choice
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.576000] scsi19 : SCSI emulation for USB Mass Storage devices
Jul 29 11:19:44 comp-Celeron-CPU-d69ecb kernel: [  748.576439] scsi20 : SCSI emulation for USB Mass Storage devices
Jul 29 11:19:46 comp-Celeron-CPU-d69ecb kernel: [  750.757934] usb 5-2: usbfs: process 16190 (modem-modeswitc) did not claim
 interface 0 before use
Jul 29 11:19:49 comp-Celeron-CPU-d69ecb kernel: [  753.579359] scsi 20:0:0:0: Direct-Access  HUAWEI
   MMC Storage 2.31 PQ: 0 ANSI: 2
Jul 29 11:19:49 comp-Celeron-CPU-d69ecb kernel: [  753.579601] sd 20:0:0:0: Attached scsi generic sg3 type 0
Jul 29 11:19:49 comp-Celeron-CPU-d69ecb kernel: [  753.585721] sd 20:0:0:0: [sdc] Attached SCSI removable disk
Jul 29 11:19:50 comp-Celeron-CPU-d69ecb kernel: [  754.735837] usb 5-2: USB disconnect, address 7
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.224014] usb 5-2: new high speed USB device using ehci_hcd and address 8
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.367228] usb 5-2: New USB device found, idVendor=12d1, idProduct=1001
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.367234] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.367239] usb 5-2: Product: HUAWEI Mobile
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.367242] usb 5-2: Manufacturer: HUAWEI Technology
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.367415] usb 5-2: configuration #1 chosen from 1 choice
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.375094] option 5-2:1.0: GSM modem (1-port) converter detected
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.375312] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.375558] option 5-2:1.1: GSM modem (1-port) converter detected
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.375704] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.382451] option 5-2:1.2: GSM modem (1-port) converter detected
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.382628] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB2
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.383257] usb-storage: probe of 5-2:1.3 failed with error -1
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb kernel: [  761.384398] usb-storage: probe of 5-2:1.4 failed with error -1
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB1): ignoring due to lack of mobile broadband capabilties
Jul 29 11:19:57 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB2): ignoring due to lack of mobile broadband capabilties
Jul 29 11:19:58 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): found serial port (udev:GSM  hal:GSM)
Jul 29 11:19:58 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): new Modem device (driver: 'option')
Jul 29 11:19:58 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): exported as
 /org/freedesktop/Hal/devices/usb_device_12d1_1001_noserial_if0_serial_usb_0
Jul 29 11:20:02 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): device state change: 1 -> 2 (reason 2)
Jul 29 11:20:03 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): deactivating device (reason: 2).
Jul 29 11:20:03 comp-Celeron-CPU-d69ecb NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion
 `iface_idx >= 0' failed
Jul 29 11:20:03 comp-Celeron-CPU-d69ecb NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion
 `iface_idx >= 0' failed
Jul 29 11:20:03 comp-Celeron-CPU-d69ecb NetworkManager: <info>  (ttyUSB0): device state change: 2 -> 3 (reason 0)Да есть такая строка. Что дальше.

[wecheslaw]

Spinoza чтобы не сорить здесь написал вам личное сообщение.

[Spinoza]

Да есть такая строка. Что дальше.

Теперь всё просто. Левой кнопкой мыши на Network Manger и создаёте новое мобильное соединение, выбираете своего оператора, и сохраняете. Вот вроде бы и всё.

[push87]

Я в интернете с Линукса. Спасибо Большое за помощь по настройке. :P :P :P :P :P :P :P
Щас будем другие вопросы задавать по программе. ::) ::)

[Skull]

Щас будем другие вопросы задавать по программе. ::) ::)

Согласно правилам, в новых темах, пожалуйста. :)

[push87]

На школьном компьютере установлена альт линукс школьный 5 юниор.
модем zte mf626 билайн.
прописал вот это правило:

Код: [Выделить]

echo 'SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/lib/udev/modem-modeswitch
 --vendor 0x12d1 --product 0x1446 --type option-zerocd"' | tee /etc/udev/rules.d/45-mf626.rulesТерминал выдал:

Код: [Выделить]

[root@comp-Celeron-CPU-e025d4 ~]# echo 'SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1",
 RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1 --product 0x1446 --type option-zerocd"' | tee /etc/udev/rules.d/45-mf626.rules
SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1
 --product 0x1446  --type option-zerocd"
[root@comp-Celeron-CPU-e025d4 ~]#проверил правило командой:

Код: [Выделить]

cat /etc/udev/rules.d/45-mf626.rulesТерминал выдал:

Код: [Выделить]

[root@comp-Celeron-CPU-e025d4 ~]# cat /etc/udev/rules.d/45-mf626.rules
SUBSYSTEM=="usb", SYSFS{idProduct}=="1446", SYSFS{idVendor}=="12d1", RUN+="/lib/udev/modem-modeswitch --vendor 0x12d1
 --product 0x1446  --type option-zerocd"
[root@comp-Celeron-CPU-e025d4 ~]#

[push87]

ввел команду:

Код: [Выделить]

tail -f /var/log/messagesи подсоединил модем, терминал выдал:

Код: [Выделить]

[root@comp-Celeron-CPU-e025d4 ~]# tail -f /var/log/messages
Sep 24 02:47:39 comp-Celeron-CPU-e025d4 kernel: [  876.800174] scsi 7:0:0:0: CD-ROM ZTE USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 0
Sep 24 02:47:39 comp-Celeron-CPU-e025d4 kernel: [  876.818027] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
Sep 24 02:47:39 comp-Celeron-CPU-e025d4 kernel: [  876.818315] sr 7:0:0:0: Attached scsi generic sg2 type 5
Sep 24 02:47:50 comp-Celeron-CPU-e025d4 hald: mounted /dev/sr0 on behalf of uid 500
Sep 24 02:49:06 comp-Celeron-CPU-e025d4 kernel: [  963.824748] usb 5-2: USB disconnect, address 7
Sep 24 02:49:06 comp-Celeron-CPU-e025d4 hald[5245]: forcibly attempting to lazy unmount /dev/sr0 as
 enclosing drive was disconnected
Sep 24 02:49:06 comp-Celeron-CPU-e025d4 kernel: [  963.856149] scsi 7:0:0:0: rejecting I/O to dead device
Sep 24 02:49:06 comp-Celeron-CPU-e025d4 hald: unmounted /dev/sr0 from '/media/Beeline' on behalf of uid 0
Sep 24 02:49:07 comp-Celeron-CPU-e025d4 gnome-keyring-daemon[7473]: removing removable location: /media/Beeline
Sep 24 02:49:07 comp-Celeron-CPU-e025d4 gnome-keyring-daemon[7473]: no volume registered at: /media/Beeline
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.024021] usb 5-2: new high speed USB device using ehci_hcd and address 8
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.170981] usb 5-2: New USB device found, idVendor=19d2, idProduct=2000
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.170987] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.170991] usb 5-2: Product: ZTE CDMA Technologies MSM
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.170995] usb 5-2: Manufacturer: ZTE, Incorporated
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.170999] usb 5-2: SerialNumber: P673M3BLNMassSto
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.171163] usb 5-2: configuration #1 chosen from 1 choice
Sep 24 02:50:03 comp-Celeron-CPU-e025d4 kernel: [ 1021.179307] scsi8 : SCSI emulation for USB Mass Storage devices
Sep 24 02:50:08 comp-Celeron-CPU-e025d4 kernel: [ 1026.179528] scsi 8:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 0
Sep 24 02:50:08 comp-Celeron-CPU-e025d4 kernel: [ 1026.202020] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
Sep 24 02:50:08 comp-Celeron-CPU-e025d4 kernel: [ 1026.202294] sr 8:0:0:0: Attached scsi generic sg2 type 5
Sep 24 02:50:19 comp-Celeron-CPU-e025d4 hald: mounted /dev/sr0 on behalf of uid 500
Sep 24 02:50:51 comp-Celeron-CPU-e025d4 hald: unmounted /dev/sr0 from '/media/Beeline' on behalf of uid 500
Sep 24 02:50:52 comp-Celeron-CPU-e025d4 gnome-keyring-daemon[7473]: removing removable location: /media/Beeline
Sep 24 02:50:52 comp-Celeron-CPU-e025d4 gnome-keyring-daemon[7473]: no volume registered at: /media/Beeline
Sep 24 02:50:53 comp-Celeron-CPU-e025d4 kernel: [ 1071.374915] usb 5-2: USB disconnect, address 8
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.016048] usb 5-2: new high speed USB device using ehci_hcd and address 9
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.150666] usb 5-2: New USB device found, idVendor=19d2, idProduct=0031
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.150671] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.150674] usb 5-2: Product: ZTE CDMA Technologies MSM
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.150676] usb 5-2: Manufacturer: ZTE, Incorporated
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.150678] usb 5-2: SerialNumber: 1234567890ABCDEF
Sep 24 02:50:59 comp-Celeron-CPU-e025d4 kernel: [ 1077.150828] usb 5-2: configuration #1 chosen from 1 choice
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.760088] scsi9 : SCSI emulation for USB Mass Storage devices
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.826217] usbcore: registered new interface driver usbserial
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.826233] USB Serial support registered for generic
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.826269] usbcore: registered new interface driver usbserial_generic
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.826271] usbserial: USB Serial Driver core
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837296] USB Serial support registered for GSM modem (1-port)
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837335] option 5-2:1.0: GSM modem (1-port) converter detected
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837515] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB0
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837534] option 5-2:1.1: GSM modem (1-port) converter detected
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837665] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB1
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837686] option 5-2:1.3: GSM modem (1-port) converter detected
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837840] usb 5-2: GSM modem (1-port) converter now attached to ttyUSB2
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837857] usbcore: registered new interface driver option
Sep 24 02:51:04 comp-Celeron-CPU-e025d4 kernel: [ 1081.837860] option: v0.7.2:USB Driver for GSM modems
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 kernel: [ 1086.765774] scsi 9:0:0:0: Direct-Access ZTE MMC Storage 322  PQ: 0 ANSI: 2
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 kernel: [ 1086.766015] sd 9:0:0:0: Attached scsi generic sg2 type 0
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 kernel: [ 1086.777639] sd 9:0:0:0: [sdc] Attached SCSI removable disk
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): found serial port (udev:GSM  hal:)
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deferring until all ports found
Sep 24 02:51:18 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Re-checking deferred serial ports
Sep 24 02:51:18 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): new Modem device (driver: 'option')
Sep 24 02:51:18 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): exported as
 /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if3_serial_usb_0
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 1 -> 2 (reason 2)
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deactivating device (reason: 2).
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion
 `iface_idx >= 0' failed
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion
 `iface_idx >= 0' failed
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 2 -> 3 (reason 0)
Настраиваю новое мобильное соединение и в терминале выдает это на настройки internet.beeline.ru:

Код: [Выделить]

[root@comp-Celeron-CPU-e025d4 ~]# tail -f /var/log/messages
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): found serial port (udev:GSM  hal:)
Sep 24 02:51:09 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deferring until all ports found
Sep 24 02:51:18 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Re-checking deferred serial ports
Sep 24 02:51:18 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): new Modem device (driver: 'option')
Sep 24 02:51:18 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): exported as
 /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if3_serial_usb_0
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 1 -> 2 (reason 2)
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deactivating device (reason: 2).
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion
 `iface_idx >= 0' failed
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion
 `iface_idx >= 0' failed
Sep 24 02:51:22 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 2 -> 3 (reason 0)
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) starting
 connection 'Beeline �\237о �\203мол�\207ани�\216'
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 3 -> 4 (reason 0)
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled...
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started...
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete.
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): powering up...
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Registered on Home network
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Associated with network: +COPS: 0,0,"KB Impuls",0
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Connected, Woo!
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled...
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting...
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 4 -> 5 (reason 0)
Sep 24 02:52:51 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Starting pppd connection
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete.
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 pppd[9543]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 kernel: [ 1189.671399] PPP generic driver version 2.4.2
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 pppd[9543]: pppd 2.4.4 started by root, uid 0
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 pppd[9543]: Using interface ppp0
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 pppd[9543]: Connect: ppp0 <--> /dev/ttyUSB2
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 5 -> 6 (reason 0)
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 pppd[9543]: CHAP authentication succeeded
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 pppd[9543]: CHAP authentication succeeded
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 6 -> 7 (reason 0)
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 kernel: [ 1189.770162] PPP BSD Compression module registered
Sep 24 02:52:52 comp-Celeron-CPU-e025d4 kernel: [ 1189.784690] PPP Deflate Compression module registered
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: <WARN>  pppd_timed_out(): Looks like pppd didn't initialize
 our dbus module
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 7 -> 9 (reason 14)
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 pppd[9543]: Terminating on signal 15
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Marking connection
 'Beeline �\237о �\203мол�\207ани�\216' invalid.
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) failed.
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 9 -> 3 (reason 0)
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deactivating device (reason: 0).
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 dbus-daemon: Rejected send message, 1 matched rules; type="error",
 sender=":1.6" (uid=0 pid=5431 comm="/usr/sbin/NetworkManager) interface="(unset)" member="(unset)"
 error name="org.freedesktop.DBus.Error.UnknownMethod"
 requested_reply=0 destination=":1.72" (uid=0 pid=9543 comm="/usr/sbin/pppd))
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 dbus-daemon: Rejected send message, 1 matched rules; type="error",
 sender=":1.6" (uid=0 pid=5431 comm="/usr/sbin/NetworkManager) interface="(unset)" member="(unset)"
 error name="org.freedesktop.DBus.Error.UnknownMethod"
 requested_reply=0 destination=":1.72" (uid=0 pid=9543 comm="/usr/sbin/pppd))
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_routes_with_iface:
 assertion `iface_idx >= 0' failed
Sep 24 02:53:12 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_addresses_with_iface:
 assertion `iface_idx >= 0' failed

[push87]

меняю настройки на home.beeline.ru и терминал выдает это:

Код: [Выделить]

[root@comp-Celeron-CPU-e025d4 ~]# tail -f /var/log/messages
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 7 -> 3 (reason 39)
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deactivating device (reason: 39).
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 pppd[9778]: Terminating on signal 15
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 pppd[9778]: Connection terminated.
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion
 `iface_idx >= 0' failed
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion
 `iface_idx >= 0' failed
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 dbus-daemon: Rejected send message, 1 matched rules; type="error", sender=":1.6"
 (uid=0 pid=5431 comm="/usr/sbin/NetworkManager) interface="(unset)" member="(unset)" error
 name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply=0  destination=":1.73"
 (uid=0 pid=9778 comm="/usr/sbin/pppd))
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 dbus-daemon: Rejected send message, 1 matched rules; type="error",
 sender=":1.6" (uid=0 pid=5431
 comm="/usr/sbin/NetworkManager) interface="(unset)" member="(unset)"
 error name="org.freedesktop.DBus.Error.UnknownMethod" requested_reply=0 destination=":1.73"
 (uid=0 pid=9778 comm="/usr/sbin/pppd))
Sep 24 02:56:31 comp-Celeron-CPU-e025d4 dbus-daemon: Rejected send message, 1 matched rules; type="error",
 sender=":1.6" (uid=0 pid=5431
 comm="/usr/sbin/NetworkManager) interface="(unset)" member="(unset)"
 error name="org.freedesktop.DBus.Error.UnknownMethod"  requested_reply=0
 destination=":1.73" (uid=0 pid=9778 comm="/usr/sbin/pppd))
Sep 24 02:56:32 comp-Celeron-CPU-e025d4 pppd[9778]: Exit.
Sep 24 02:57:24 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) starting connection
 'Beeline �\237о �\203мол�\207ани�\216'
Sep 24 02:57:24 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 3 -> 4 (reason 0)
Sep 24 02:57:24 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled...
Sep 24 02:57:24 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started...
Sep 24 02:57:24 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete.
Sep 24 02:57:25 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): powering up...
Sep 24 02:57:25 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Searching for a network...
Sep 24 02:57:27 comp-Celeron-CPU-e025d4 last message repeated 2 times
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Registered on Home network
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Associated with network: +COPS: 0,0,"KB Impuls",0
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Connected, Woo!
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled...
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting...
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 4 -> 5 (reason 0)
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Starting pppd connection
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 pppd[9906]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete.
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 pppd[9906]: pppd 2.4.4 started by root, uid 0
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 pppd[9906]: Using interface ppp0
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 pppd[9906]: Connect: ppp0 <--> /dev/ttyUSB2
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 5 -> 6 (reason 0)
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 pppd[9906]: CHAP authentication succeeded
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 pppd[9906]: CHAP authentication succeeded
Sep 24 02:57:28 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 6 -> 7 (reason 0)
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 pppd[9906]: Could not determine remote IP address: defaulting to 10.64.64.64
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 pppd[9906]: local  IP address 172.19.43.79
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 pppd[9906]: remote IP address 10.64.64.64
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 pppd[9906]: primary   DNS address 10.11.12.13
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 pppd[9906]: secondary DNS address 10.11.12.14
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 NetworkManager: <info>  PPP manager(IP Config Get) reply received.
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 4 of 5 (IP Configure Get) scheduled...
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 4 of 5 (IP Configure Get) started...
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 5 of 5 (IP Configure Commit) scheduled...
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 4 of 5 (IP Configure Get) complete.
Sep 24 02:57:35 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 5 of 5 (IP Configure Commit) started...
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: loading configuration from '/etc/named.conf'
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv4 port range: [1024, 65535]
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv6 port range: [1024, 65535]
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 bind: sending signal 1 to named succeeded
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 pppd[9906]: Script /etc/ppp/ip-up finished (pid 9921), status = 0x0
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: listening on IPv4 interface ppp0, 172.19.43.79#53
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: could not listen on UDP socket: permission denied
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: creating IPv4 interface ppp0 failed; interface ignored
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ppp0): writing resolv.conf to /sbin/resolvconf
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 bind: sending signal 1 to named succeeded
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: loading configuration from '/etc/named.conf'
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv4 port range: [1024, 65535]
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv6 port range: [1024, 65535]
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: listening on IPv4 interface ppp0, 172.19.43.79#53
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: could not listen on UDP socket: permission denied
Sep 24 02:57:36 comp-Celeron-CPU-e025d4 named[5747]: creating IPv4 interface ppp0 failed; interface ignored
Sep 24 02:57:37 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 7 -> 8 (reason 0)
Sep 24 02:57:37 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ppp0): writing resolv.conf to /sbin/resolvconf
Sep 24 02:57:37 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Policy set 'Beeline �\237о �\203мол�\207ани�\216' (ppp0)
 as default for routing and DNS.
Sep 24 02:57:37 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) successful, device activated.
Sep 24 02:57:37 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) Stage 5 of 5 (IP Configure Commit)
 complete.
Через некоторое время соединение разрывается и терминал выдает это:

Код: [Выделить]

Sep 24 03:00:00 comp-Celeron-CPU-e025d4 pppd[9906]: LCP terminated by peer
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 pppd[9906]: Connect time 2.5 minutes.
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 pppd[9906]: Sent 1819 bytes, received 1772 bytes.
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 8 -> 7 (reason 0)
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 named[5747]: loading configuration from '/etc/named.conf'
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv4 port range: [1024, 65535]
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv6 port range: [1024, 65535]
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 bind: sending signal 1 to named succeeded
Sep 24 03:00:00 comp-Celeron-CPU-e025d4 pppd[9906]: Script /etc/ppp/ip-down finished (pid 10326), status = 0x1
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 pppd[9906]: Connection terminated.
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 7 -> 9 (reason 13)
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <WARN>  monitor_cb(): Could not read ppp stats: No such device
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Marking connection
 'Beeline �\237о �\203мол�\207ани�\216' invalid.
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <info>  Activation (ttyUSB2) failed.
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): device state change: 9 -> 3 (reason 0)
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): deactivating device (reason: 0).
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: <info>  (ttyUSB2): removing resolv.conf from /sbin/resolvconf
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 named[5747]: loading configuration from '/etc/named.conf'
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv4 port range: [1024, 65535]
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 named[5747]: using default UDP/IPv6 port range: [1024, 65535]
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 bind: sending signal 1 to named succeeded
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_routes_with_iface:
 assertion `iface_idx >= 0' failed
Sep 24 03:00:03 comp-Celeron-CPU-e025d4 NetworkManager: nm_system_device_flush_ip4_addresses_with_iface:
 assertion `iface_idx >= 0' failed
Sep 24 03:00:04 comp-Celeron-CPU-e025d4 pppd[9906]: Terminating on signal 15
Sep 24 03:00:04 comp-Celeron-CPU-e025d4 pppd[9906]: Modem hangup
Sep 24 03:00:04 comp-Celeron-CPU-e025d4 pppd[9906]: Exit.

[fce]

Напишите пожалуйста что да как делать. Я новичок и разбираюсь в линуксе очень плохо.

Смотри мой пост здесь http://forum.altlinux.org/index.php/topic,6917.30.html
вопросы в личку

[push87]

Звоните операторам билайн и оставляйте пожелание клиентов по подготовке программного обеспечения для  USB модема MF-626 и других моделей для работы в ОС Линукс. Может что то сделают.