Есть ALT Linux Server 5.0.0 x86_64.
нет подключения pppoe к провайдеру
установлены:
alterator-net-pppoe-0.9-alt1
ppp-pppoe-2.4.4-alt12
rp-pppoe-gui-3.10-alt1
rp-pppoe-client-3.10-alt1
rp-pppoe-base-3.10-alt1
ppp-common-0.5.1-alt1
ppp-2.4.4-alt12
# pppoe.conf
ETH='eth1'
USER='xxxxxx'
DEMAND=no
DNSTYPE=SERVER
PEERDNS=yes
DNS1=
DNS2=
DEFAULTROUTE=yes
CONNECT_TIMEOUT=30
CONNECT_POLL=2
ACNAME=
SERVICENAME=pppoe
PING="."
CF_BASE=`basename $CONFIG`
PIDFILE="/var/run/$CF_BASE-pppoe.pid"
SYNCHRONOUS=no
CLAMPMSS=1412
LCP_INTERVAL=20
LCP_FAILURE=3
PPPOE_TIMEOUT=80
FIREWALL=NONE
LINUX_PLUGIN=
PPPOE_EXTRA=""
Логин /пароль в chap-secrets и pap-secrets прописаны в виде:
"логин" * "пароль"
pppoe-debug.txt
--------------------------------------------
* The following section contains information about your system
Fri Apr 2 09:28:23 YEKST 2010
Output of uname -a
Linux kino.t7.ru 2.6.27-ovz-smp-alt9 #1 SMP Tue Aug 18 09:29:34 UTC 2009 x86_64 GNU/Linux
---------------------------------------------
* The following section contains information about your network
* interfaces. The one you chose for PPPoE should contain the words:
* 'UP' and 'RUNNING'. If it does not, you probably have an Ethernet
* driver problem.
Output of ifconfig -a
breth0 Link encap:Ethernet HWaddr 90:E6:BA:B7:01:45
inet addr:10.0.13.248 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:50742 errors:0 dropped:0 overruns:0 frame:0
TX packets:4500 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5955593 (5.6 MiB) TX bytes:1905838 (1.8 MiB)
breth1 Link encap:Ethernet HWaddr 00:26:5A:06:84:6F
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:80 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3850 (3.7 KiB) TX bytes:1368 (1.3 KiB)
eth0 Link encap:Ethernet HWaddr 90:E6:BA:B7:01:45
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:458680 errors:0 dropped:0 overruns:0 frame:0
TX packets:592870 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55265690 (52.7 MiB) TX bytes:165486434 (157.8 MiB)
Interrupt:248 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:26:5A:06:84:6F
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:196 errors:0 dropped:0 overruns:0 frame:0
TX packets:171 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12346 (12.0 KiB) TX bytes:11648 (11.3 KiB)
Interrupt:16 Base address:0xe800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1041 errors:0 dropped:0 overruns:0 frame:0
TX packets:1041 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102756 (100.3 KiB) TX bytes:102756 (100.3 KiB)
---------------------------------------------
* The following section contains information about kernel modules
* If the module for your Ethernet card is 'tulip', you might
* want to look for an updated version at
http://www.scyld.comOutput of lsmod
Module Size Used by
nf_conntrack_ftp 17848 0
xt_physdev 11024 1
xt_tcpudp 11776 14
iptable_mangle 12928 0
iptable_nat 16260 0
nf_nat 28436 1 iptable_nat
nf_conntrack_ipv4 29856 7 iptable_nat,nf_nat
iptable_filter 12416 1
ip_tables 27792 3 iptable_mangle,iptable_nat,iptable_filter
pppoe 21512 0
pppox 12056 1 pppoe
binfmt_misc 18700 1
af_packet 29568 2
ppp_async 18432 0
crc_ccitt 10624 1 ppp_async
ppp_generic 37016 3 pppoe,pppox,ppp_async
slhc 14848 1 ppp_generic
bridge 64416 0
stp 11268 1 bridge
ipt_ULOG 18216 3
xt_state 10752 4
nf_conntrack 96528 5 nf_conntrack_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
x_tables 32136 6 xt_physdev,xt_tcpudp,iptable_nat,ip_tables,ipt_ULOG,xt_state
dm_mod 70640 0
ehci_hcd 47628 0
usbcore 173328 2 ehci_hcd
via_rhine 32520 0
r8169 44804 0
mii 14592 2 via_rhine,r8169
sg 44256 0
evdev 19872 3
pcspkr 11264 0
rtc_cmos 19256 0
thermal 27424 0
sr_mod 25284 0
cdrom 46504 1 sr_mod
rtc_core 28484 1 rtc_cmos
rtc_lib 11776 1 rtc_core
processor 47928 1 thermal
button 15776 0
ext3 147472 2
jbd 62888 1 ext3
mbcache 17540 1 ext3
raid456 137256 1
async_xor 12032 1 raid456
async_memcpy 10752 1 raid456
async_tx 16508 3 raid456,async_xor,async_memcpy
xor 13840 2 raid456,async_xor
ahci 42636 6
libata 197728 1 ahci
dock 18080 1 libata
sd_mod 45512 11
crc_t10dif 10368 1 sd_mod
scsi_mod 180984 4 sg,sr_mod,libata,sd_mod
---------------------------------------------
* The following section lists your routing table.
* If you have an entry which starts with '0.0.0.0', you probably
* have defined a default route and gateway, and pppd will
* not create a default route using your ISP. Try getting
* rid of this route.
Output of netstat -n -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.0.13.0 0.0.0.0 255.255.255.0 U 0 0 0 breth0
10.0.13.0 10.0.13.1 255.255.255.0 UG 0 0 0 breth0
0.0.0.0 10.0.13.1 0.0.0.0 UG 0 0 0 breth0
---------------------------------------------
Contents of /etc/resolv.conf
* The following section lists DNS setup.
* If you can browse by IP address, but not name, suspect
* a DNS problem.
# Generated by resolvconf
# Do not edit manually, use
# /etc/net/ifaces/<interface>/resolv.conf instead.
search t7.ru
nameserver 127.0.0.1
nameserver 10.0.13.1
---------------------------------------------
* The following section lists /etc/ppp/options.
* You should have NOTHING in that file.
Contents of /etc/ppp/options
lock
noipdefault
noauth
replacedefaultroute
nopredictor1
plugin rp-pppoe.so
---------------------------------------------
* The following section identifies your Ethernet interface
* and user name. Some ISP's need 'username'; others
* need 'username@isp.com'. Try both
ETH=eth1; USER=xxxxxx
---------------------------------------------
* The following section shows the pppd command we will invoke
pppd invocation
/usr/bin/setsid /usr/sbin/pppd pty '/usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth1 -T 80 -U -m 1412 ' noipdefault noauth default-asyncmap defaultroute hide-pass
word nodetach usepeerdns mtu 1492 mru 1492 noaccomp nodeflate nopcomp novj novjccomp user v41679198 lcp-echo-interval 20 lcp-echo-failure 3 debug
---------------------------------------------
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4
using channel 52
Using interface ppp0
Connect: ppp0 <--> /dev/pts/6
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
sent [LCP ConfReq id=0x1 <mru 1492> <magic 0x430be272>]
LCP: timeout sending Config-Requests
Connection terminated.
Modem hangup
Waiting for 1 child processes...
script /usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth1 -T 80 -U -m 1412 -D /tmp/pppoe-debug-16410/pppoe-debug.txt-0, pid 16467
pppoe: Timeout waiting for PADO packets
Script /usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth1 -T 80 -U -m 1412 -D /tmp/pppoe-debug-16410/pppoe-debug.txt-0 finished (pid 16467), status = 0x1
---------------------------------------------
* The following section is an extract from your log.
* Look for error messages from pppd, such as
* a lack of kernel support for PPP, authentication failure
* etc.
Extract from /var/log/messages
Apr 2 09:21:17 kino pppd[16205]: Plugin rp-pppoe.so loaded.
Apr 2 09:21:17 kino pppd[16205]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4
Apr 2 09:21:17 kino pppd[16205]: pppd 2.4.4 started by root, uid 0
Apr 2 09:21:17 kino pppd[16205]: Using interface ppp0
Apr 2 09:21:17 kino pppd[16205]: Connect: ppp0 <--> /dev/pts/5
Apr 2 09:21:48 kino pppd[16205]: LCP: timeout sending Config-Requests
Apr 2 09:21:48 kino pppd[16205]: Connection terminated.
Apr 2 09:21:48 kino pppd[16205]: Modem hangup
Apr 2 09:21:52 kino pppoe[16206]: Timeout waiting for PADO packets
Apr 2 09:21:52 kino pppd[16205]: Script /usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth1 -T 80 -U -m 1412 finished (pid 16206), status = 0x1
Apr 2 09:21:52 kino pppd[16205]: Exit.
Apr 2 09:28:23 kino pppd[16466]: Plugin rp-pppoe.so loaded.
Apr 2 09:28:23 kino pppd[16466]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.4
Apr 2 09:28:23 kino pppd[16466]: pppd 2.4.4 started by root, uid 0
Apr 2 09:28:23 kino pppd[16466]: Using interface ppp0
Apr 2 09:28:23 kino pppd[16466]: Connect: ppp0 <--> /dev/pts/6
Apr 2 09:28:54 kino pppd[16466]: LCP: timeout sending Config-Requests
Apr 2 09:28:54 kino pppd[16466]: Connection terminated.
Apr 2 09:28:54 kino pppd[16466]: Modem hangup
Apr 2 09:28:58 kino pppoe[16467]: Timeout waiting for PADO packets
Apr 2 09:28:58 kino pppd[16466]: Script /usr/sbin/pppoe -p /var/run/pppoe.conf-pppoe.pid.pppoe -I eth1 -T 80 -U -m 1412 -D /tmp/pppoe-debug-16410/pppoe-debug.txt-0 finished (p
id 16467), status = 0x1
Apr 2 09:28:58 kino pppd[16466]: Exit.
Fri Apr 2 09:28:58 YEKST 2010
---------------------------------------------
* The following section is a dump of the packets
* sent and received by rp-pppoe. If you don't see
* any output, it's an Ethernet driver problem. If you only
* see three PADI packets and nothing else, check your cables
* and modem. Make sure the modem lights flash when you try
* to connect. Check that your Ethernet card is in
* half-duplex, 10Mb/s mode. If all else fails,
* try using pppoe-sniff.
rp-pppoe debugging dump
rp-pppoe-3.10
09:28:23.494 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12
SourceAddr 00:26:5a:06:84:6f DestAddr ff:ff:ff:ff:ff:ff
01 01 00 00 01 03 00 04 53 40 00 00 ........S@..
09:28:28.494 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12
SourceAddr 00:26:5a:06:84:6f DestAddr ff:ff:ff:ff:ff:ff
01 01 00 00 01 03 00 04 53 40 00 00 ........S@..
09:28:38.494 SENT PPPoE Discovery (8863) PADI sess-id 0 length 12
SourceAddr 00:26:5a:06:84:6f DestAddr ff:ff:ff:ff:ff:ff
01 01 00 00 01 03 00 04 53 40 00 00 ........S@..
в этот же коммутатор включен другой компьютер с ALT Linux Server 4.0.1 на нем соединение с теми-же настройками поднимается без проблем... подключал десктопную машину картина та же - на 4-ке нет проблем... 5-ка - глухо как в танке...
второй день вожусь, в интернете ничего похожего не нашел... уже и идей не осталось...
