Установка Wi-Fi адаптера

[Alex.7]

Всем привет! Недавно купил Wi-Fi адаптер для стационарного компьютера (чтобы не тянуть кабель в комнату) однако Linux его не опознает до конца. Адаптер такой: Trendnet TEW-648UB. На диске драйверов под Линукс не оказалось. Подскажите как решить проблему с дровами и настроить сеть?

[ruslandh]

Начните с вывода lspci -v про него

[Alex.7]

Начните с вывода lspci -v про него

Привожу вывод команды:  (но я не нашел здесь usb wi-fi adaptera)

Код: [Выделить]

00:00.0 Host bridge: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge
Subsystem: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 0
 
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5952
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Kernel driver in use: pcieport
 
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [b0] Subsystem: ATI Technologies Inc Device 5952
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Kernel driver in use: pcieport
 
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 81ef
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 21
I/O ports at b000 [size=8]
I/O ports at a000 [size=4]
I/O ports at 9000 [size=8]
I/O ports at 8000 [size=4]
I/O ports at 7000 [size=16]
Memory at fbcffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+
Capabilities: [70] SATA HBA v1.0
Kernel driver in use: ahci
 
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI0)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fbcfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ohci_hcd
 
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI1)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fbcfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ohci_hcd
 
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI2)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fbcfc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ohci_hcd
 
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI3)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fbcfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ohci_hcd
 
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB600 USB (OHCI4)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fbcfa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: ohci_hcd
 
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB600 USB Controller (EHCI)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at fbcff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
 
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 4385
Flags: 66MHz, medium devsel
I/O ports at 0b00 [size=16]
Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
 
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc SB600 IDE
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Enable- Count=1/1 Maskable- 64bit-
Kernel driver in use: pata_atiixp
 
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Flags: bus master, slow devsel, latency 64, IRQ 27
Memory at fbcf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: HDA Intel
 
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
Subsystem: ATI Technologies Inc SB600 PCI to LPC Bridge
Flags: bus master, 66MHz, medium devsel, latency 0
 
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: faf00000-faffffff
 
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
 
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
 
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
 
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
 
01:00.0 VGA compatible controller: ATI Technologies Inc RV515 [Radeon X1300] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device 0302
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fbdf0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at c000 [size=256]
Expansion ROM at fbdc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: radeon
 
01:00.1 Display controller: ATI Technologies Inc RV515 [Radeon X1300] (Secondary)
Subsystem: ATI Technologies Inc Device 0303
Flags: bus master, fast devsel, latency 0
Memory at fbde0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
 
02:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8202
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Memory at fbefe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci
 
03:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at fafff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
 
03:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at faffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
 
03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: ohci1394
 
03:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
Memory at fbff8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at e800 [size=256]
Expansion ROM at fbfc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Kernel driver in use: skge


[Alex.7]

Однако командой dmesg он определяется таким образом:

[    2.966406] usb 1-1: New USB device found, idVendor=0bda, idProduct=8171
[    2.966410] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.966413] usb 1-1: Product: 11n USB Adapter
[    2.966416] usb 1-1: Manufacturer: Manufacturer Realtek
[    2.966418] usb 1-1: SerialNumber: 00e04c000001

[Skull]

Его и не будет. Пишите версию дистрибутива и вывод

Код: [Выделить]

usb-devicesВывод вставьте в тег [ code ], пожалуйста.

[Alex.7]

Как это проделать?- Вывод вставьте в тег [ code ]

[Skull]

Как это проделать?- Вывод вставьте в тег [ code ]

Выделить текст и нажать на кнопку с # над полем ввода.

[Alex.7]

Код: [Выделить]

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh=10
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.34-12-default ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:13.5
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

WI-FI ADAPTER
************
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0bda ProdID=8171 Rev= 2.00
S:  Manufacturer=Manufacturer Realtek
S:  Product=11n USB Adapter
S:  SerialNumber=00e04c000001
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl819xU

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.34-12-default ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:13.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.34-12-default ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:13.1
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=045e ProdID=0083 Rev= 0.00
S:  Manufacturer=Microsoft
S:  Product=Basic Optical Mouse
C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.34-12-default ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:13.2
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.34-12-default ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:13.3
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.34-12-default ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:13.4
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub


[Alex.7]

Дистрибутив Ковчег 5.0

[rxxrus]

Дистрибутив Ковчег 5.0

Установи все что касается 8192  (firmware-rtl8192 и kernel-modules-rtl8192-std-def)
и отпишись.

[Alex.7]

Решил проблему несколько другим, более простым способом: переустановил систему с подключенным адаптером. Линукс его определил во время установки и установил для него драйверы.
      Адаптер работает, обнаруживает сети при сканировании, но выход в Интернет по прежнему пока отсутствует. В чем причина пока не пойму. Брандмауэр отключен. Имя сети, пароль ввел правильные. В чем еще может быть загвоздка? Какие настройки смотреть и что следует изменить? Может нужно прописать мак адрес роутера? ИП? Адрес шлюза? Подскажите пожалуйста.