Вот лог выведенный командой dmesg. Не весь конечно (весь очень длинный) это отрывок откуда начинают перечисляться USB устройства.
8.380129] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.380136] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.380142] usb usb3: Product: EHCI Host Controller
[ 8.380148] usb usb3: Manufacturer: Linux 2.6.30-std-def-alt14 ehci_hcd
[ 8.380154] usb usb3: SerialNumber: 0000:00:13.2
[ 8.380473] usb usb3: configuration #1 chosen from 1 choice
[ 8.380538] hub 3-0:1.0: USB hub found
[ 8.380560] hub 3-0:1.0: 6 ports detected
[ 8.381567] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.381661] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 8.381724] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 8.381795] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0405000
[ 8.389868] acer-wmi: Brightness must be controlled by generic video driver
[ 8.409726] cfg80211: Using static regulatory domain info
[ 8.409734] cfg80211: Regulatory domain: US
[ 8.409740] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.409748] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 8.409755] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.409762] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.409769] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.409776] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.409783] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.409802] cfg80211: Calling CRDA for country: US
[ 8.467361] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.467371] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.467378] usb usb4: Product: OHCI Host Controller
[ 8.467383] usb usb4: Manufacturer: Linux 2.6.30-std-def-alt14 ohci_hcd
[ 8.467389] usb usb4: SerialNumber: 0000:00:12.1
[ 8.467623] usb usb4: configuration #1 chosen from 1 choice
[ 8.467690] hub 4-0:1.0: USB hub found
[ 8.467746] hub 4-0:1.0: 3 ports detected
[ 8.468210] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.468306] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 8.468358] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 8.468411] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0406000
[ 8.492508] acpi device:05: registered as cooling_device2
[ 8.493306] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[ 8.493481] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.519206] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.519217] Disabling lock debugging due to kernel taint
[ 8.528118] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.528128] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.528135] usb usb5: Product: OHCI Host Controller
[ 8.528141] usb usb5: Manufacturer: Linux 2.6.30-std-def-alt14 ohci_hcd
[ 8.528147] usb usb5: SerialNumber: 0000:00:13.0
[ 8.528406] usb usb5: configuration #1 chosen from 1 choice
[ 8.528473] hub 5-0:1.0: USB hub found
[ 8.528495] hub 5-0:1.0: 3 ports detected
[ 8.528849] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.528951] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 8.529156] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 8.529228] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0407000
[ 8.580348] [fglrx] Maximum main memory to use for locked dma buffers: 3003 MBytes.
[ 8.580867] [fglrx] vendor: 1002 device: 9553 count: 1
[ 8.581605] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 8.581635] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.581647] pci 0000:02:00.0: setting latency timer to 64
[ 8.581943] [fglrx] Kernel PAT support is enabled
[ 8.581986] [fglrx] module loaded - fglrx 8.65.4 [Aug 13 2009] with 1 minors
[ 8.600102] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.600112] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.600119] usb usb6: Product: OHCI Host Controller
[ 8.600125] usb usb6: Manufacturer: Linux 2.6.30-std-def-alt14 ohci_hcd
[ 8.600131] usb usb6: SerialNumber: 0000:00:13.1
[ 8.600380] usb usb6: configuration #1 chosen from 1 choice
[ 8.600445] hub 6-0:1.0: USB hub found
[ 8.600502] hub 6-0:1.0: 3 ports detected
[ 8.617326] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 8.617382] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.638637] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:26:2d:5d:37:b3
[ 8.638649] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 8.638657] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 8.638663] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 8.649343] psmouse serio2: ID: 73 02 64
[ 8.671653] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.671675] ath9k 0000:06:00.0: setting latency timer to 64
[ 8.752116] usb 3-3: new high speed USB device using ehci_hcd and address 3
[ 8.788150] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[ 8.840406] HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.840462] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 9.015358] usb 3-3: New USB device found, idVendor=19d2, idProduct=2000
[ 9.015368] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 9.015376] usb 3-3: Product: ZTE CDMA Technologies MSM
[ 9.015381] usb 3-3: Manufacturer: ZTE,Incorporated
[ 9.015634] usb 3-3: configuration #1 chosen from 1 choice
[ 9.132225] usb 3-5: new high speed USB device using ehci_hcd and address 4
[ 9.306508] usb 3-5: New USB device found, idVendor=04f2, idProduct=b044
[ 9.306519] usb 3-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 9.306526] usb 3-5: Product: CNF7017
[ 9.306532] usb 3-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 9.306537] usb 3-5: SerialNumber: SN0001
[ 9.306802] usb 3-5: configuration #1 chosen from 1 choice
[ 9.445114] usb 5-2: new low speed USB device using ohci_hcd and address 2
[ 9.616127] usb 5-2: New USB device found, idVendor=046d, idProduct=c521
[ 9.616137] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.616144] usb 5-2: Product: USB Receiver
[ 9.616149] usb 5-2: Manufacturer: Logitech
[ 9.616417] usb 5-2: configuration #1 chosen from 1 choice
[ 9.732669] usbcore: registered new interface driver hiddev
[ 9.738848] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input9
[ 9.739194] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-2/input0
[ 9.748345] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input10
[ 9.748742] generic-usb 0003:046D:C521.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-2/input1
[ 9.748783] usbcore: registered new interface driver usbhid
[ 9.748791] usbhid: v2.6:USB HID core driver
[ 9.819045] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 9.819770] Registered led device: ath9k-phy0::radio
[ 9.819806] Registered led device: ath9k-phy0::assoc
[ 9.819850] Registered led device: ath9k-phy0::tx
[ 9.819885] Registered led device: ath9k-phy0::rx
[ 9.819903] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf9100000, irq=17
[ 9.846486] Linux video capture interface: v2.00
[ 9.856321] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044)
[ 9.874945] usbcore: registered new interface driver usbserial
[ 9.874980] USB Serial support registered for generic
[ 9.912911] input: CNF7017 as /devices/pci0000:00/0000:00:13.2/usb3/3-5/3-5:1.0/input/input11
[ 9.913136] usbcore: registered new interface driver uvcvideo
[ 9.913144] USB Video Class driver (v0.1.0)
[ 9.914797] usbcore: registered new interface driver usbserial_generic
[ 9.914805] usbserial: USB Serial Driver core
[ 9.940651] USB Serial support registered for GSM modem (1-port)
[ 9.940741] option 3-3:1.0: GSM modem (1-port) converter detected
[ 9.941193] usb 3-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 9.941249] usbcore: registered new interface driver option
[ 9.941255] option: v0.7.2:USB Driver for GSM modems
[ 9.946622] usbcore: registered new interface driver libusual
[ 9.961869] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio2/input/input12
[ 27.533458] device-mapper: uevent: version 1.0.3
[ 27.534242] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 28.352534] fuse init (API version 7.12)
[ 39.245984] Bluetooth: Core ver 2.15
[ 39.246532] NET: Registered protocol family 31
[ 39.246538] Bluetooth: HCI device and connection manager initialized
[ 39.246546] Bluetooth: HCI socket layer initialized
[ 39.267328] Bluetooth: L2CAP ver 2.13
[ 39.267336] Bluetooth: L2CAP socket layer initialized
[ 39.377863] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 39.377871] Bluetooth: BNEP filters: protocol multicast
[ 39.464917] Bridge firewalling registered
[ 39.576302] Bluetooth: SCO (Voice Link) ver 0.6
[ 39.576309] Bluetooth: SCO socket layer initialized
[ 41.637352] RPC: Registered udp transport module.
[ 41.637360] RPC: Registered tcp transport module.
[ 43.020970] tg3 0000:03:00.0: PME# disabled
[ 43.021170] alloc irq_desc for 28 on cpu 0 node 0
[ 43.021176] alloc kstat_irqs on cpu 0 node 0
[ 43.021202] tg3 0000:03:00.0: irq 28 for MSI/MSI-X
[ 43.355806] NET: Registered protocol family 17
[ 50.818968] wlan0: authenticate with AP 00:3a:98:c9:8c:30
[ 50.821959] wlan0: authenticated
[ 50.821967] wlan0: associate with AP 00:3a:98:c9:8c:30
[ 50.828069] wlan0: RX AssocResp from 00:3a:98:c9:8c:30 (capab=0x431 status=0 aid=1)
[ 50.828078] wlan0: associated
[ 50.967391] QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard
[ 50.967594] KQEMU installed, max_locked_mem=1613768kB.
[ 66.771894] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 66.771902] vboxdrv: Successfully done.
[ 66.771908] vboxdrv: Found 2 processor cores.
[ 66.772159] vboxdrv: fAsync=1 offMin=0x5f8547d offMax=0x5f8547d
[ 66.772275] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 66.772275] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000).
[ 67.011856] vboxNetAdpOpen returns 0
[ 75.386921] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 80.552333] REISERFS (device sda5): found reiserfs format "3.6" with standard journal
[ 80.552361] REISERFS (device sda5): using ordered data mode
[ 80.562856] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
