Опять пп. 1-3 (но в vbox) и "modprob: command not found"
[root@localhost vasiliy]# cat /var/log/messages | grep vend/prod
Oct 8 07:42:17 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 8 08:54:42 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 8 09:12:05 localhost kernel: usb.c: USB device 3 (vend/prod 0x58f/0x6387) is not claimed by any active driver.
Oct 8 11:17:49 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 8 11:27:16 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 8 12:23:52 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 06:22:32 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 07:54:01 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 07:54:02 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 9 08:13:02 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 08:13:03 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 9 09:43:08 localhost kernel: usb.c: USB device 4 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 9 09:56:54 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 09:57:34 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 9 10:11:49 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 10:11:50 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 9 11:18:16 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 11:50:30 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 9 11:54:23 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
Oct 9 12:09:06 localhost kernel: usb.c: USB device 4 (vend/prod 0x58f/0x6387) is not claimed by any active driver.
Oct 10 06:43:10 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 10 06:57:53 localhost kernel: usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
Oct 10 07:17:04 localhost kernel: usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
[root@localhost vasiliy]# dmesg
Linux version 2.4.26-std-up-alt6 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Tue Aug 3 21:45:23 MSD 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
DMI 2.5 present.
5 structures occupying 352 bytes.
DMI table at 0x000E1000.
BIOS Vendor: innotek GmbH
BIOS Version: VirtualBox
BIOS Release: 12/01/2006
System Vendor: innotek GmbH
Product Name: VirtualBox
Version: 1.2
Serial Number: 0
ACPI: RSDP (v002 VBOX ) @ 0x000e0000
ACPI: XSDT (v001 VBOX VBOXXSDT 0x00000001 ASL 0x00000061) @ 0x0fff0030
ACPI: FADT (v004 VBOX VBOXFACP 0x00000001 ASL 0x00000061) @ 0x0fff00f0
ACPI: SSDT (v001 VBOX VBOXCPUT 0x00000002 INTL 0x20100528) @ 0x0fff0240
ACPI: DSDT (v001 VBOX VBOXBIOS 0x00000002 INTL 0x20100528) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=linux-up ro root=305
Found and enabled local APIC!
Initializing CPU#0
Detected 2032.703 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3250.58 BogoMIPS
Memory: 256280k/262080k available (1235k kernel code, 5412k reserved, 508k data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 078bf3bf 00000000 00000000 00000000
CPU: Common caps: 078bf3bf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1878.3330 MHz.
..... host bus clock speed is 1107.3542 MHz.
cpu: 0, clocks: 11073542, slice: 5536771
CPU0<T0:11073536,T1:5535152,D:1613,S:5536771,C:11073542>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfc060, last bus=0
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xd0807000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=33
vesafb: protected mode interface info at c000:7fe6
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 42776 bytes, v2).
Console: switching to colour frame buffer device 82x26
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:01.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: VBOX HARDDISK, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: VBOX CD-ROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 4179968 sectors (2140 MB) w/256KiB Cache, CHS=518/128/63, UDMA(33)
Partition check:
hda: hda1 hda2 < hda5 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 141k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 72540k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Real Time Clock Driver v1.10f
ACPI: AC Adapter [AC] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
subfs: subfs-2.4 version 0.9.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:06.0 to 64
usb-ohci.c: USB OHCI at membase 0xd0a38000, IRQ 11
usb-ohci.c: usb-00:06.0, PCI device 106b:003f (Apple Computer Inc.)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 8 ports detected
usb.c: USB disconnect on device 00:06.0-0 address 1
hub.c: new USB device 00:06.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x80ee/0x21) is not claimed by any active driver.
usb.c: USB disconnect on device 00:06.0-1 address 2
usb.c: USB bus 1 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
inserting floppy driver for 2.4.26-std-up-alt6
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
pcnet32.c:v1.28 02.20.2004 tsbogend@alpha.franken.de
PCI: Setting latency timer of device 00:03.0 to 64
pcnet32: PCnet/FAST III 79C973 at 0xd020, 08 00 27 af 81 d6 assigned IRQ 10.
divert: allocating divert_blk for eth0
eth0: registered as PCnet/FAST III 79C973
pcnet32: 1 cards_found.
divert: freeing divert_blk for eth0
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
usb-ohci.c: USB OHCI at membase 0xd0a31000, IRQ 11
usb-ohci.c: usb-00:06.0, PCI device 106b:003f (Apple Computer Inc.)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 8 ports detected
hub.c: new USB device 00:06.0-1, assigned address 2
input: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb1:2.0
mtrr: your processor doesn't support write-combining
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 0 changed to on
slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 1 changed to on
Smart Link AMRMO modem.
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (800x600, 11408 bytes, v2).
Splash status on console 11 changed to on
mtrr: your processor doesn't support write-combining
mtrr: your processor doesn't support write-combining
hub.c: new USB device 00:06.0-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x16d5/0x6501) is not claimed by any active driver.
[root@localhost vasiliy]# modprob usbserial vendor=0x16d5 product=0x6501
bash: modprob: command not found
[root@localhost vasiliy]# su -
[root@localhost root]# modprob usbserial vendor=0x16d5 product=0x6501
-bash: modprob: command not found
[root@localhost root]# modprob usbserial vendor=0x16d5 product=0x6501
-bash: modprob: command not found
[root@localhost root]#
