Автор Тема: Пропадает wi fi соеденение в Альт Линукс [решено]  (Прочитано 4954 раз)

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
Нет я в Украине, а как поставить игнорирование?

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 361
  • Учиться .... Телепатами не рождаются, ими ....
а как поставить игнорирование?
Я ответил выше. Ну, или в апплете NetworkManager`а - изменить соединение и дальше ....
« Последнее редактирование: 29.06.2015 14:34:24 от ruslandh »

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 361
  • Учиться .... Телепатами не рождаются, ими ....
А ну, да ua - это Украина.

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
Всё равно после внесения игнорирования пропадает вай фай, что может где то настривать нужно параметры адаптера?

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 361
  • Учиться .... Телепатами не рождаются, ими ....
Может, смотрите логи после внесённых изменений.

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 361
  • Учиться .... Телепатами не рождаются, ими ....

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
http://www.altlinux.org/Каналы_WiFi
Первая ссылка точно не мой случай
Вторая не рабочая.

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
dmesg:
[   12.938195] uhci_hcd: USB Universal Host Controller Interface driver
[   12.938342] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   12.938359] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   12.938400] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[   12.939646] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[   12.941624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[   12.941635] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.941641] usb usb1: Product: UHCI Host Controller
[   12.941646] usb usb1: Manufacturer: Linux 3.14.41-std-def-alt1 uhci_hcd
[   12.941651] usb usb1: SerialNumber: 0000:00:1d.0
[   12.942028] hub 1-0:1.0: USB hub found
[   12.942053] hub 1-0:1.0: 2 ports detected
[   12.942435] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.942453] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   12.942493] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[   12.942654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   12.942662] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.942667] usb usb2: Product: UHCI Host Controller
[   12.942672] usb usb2: Manufacturer: Linux 3.14.41-std-def-alt1 uhci_hcd
[   12.942677] usb usb2: SerialNumber: 0000:00:1d.1
[   12.942984] hub 2-0:1.0: USB hub found
[   12.943007] hub 2-0:1.0: 2 ports detected
[   12.943327] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.943341] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   12.943379] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[   12.948416] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   12.948427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   12.948433] usb usb3: Product: UHCI Host Controller
[   12.948438] usb usb3: Manufacturer: Linux 3.14.41-std-def-alt1 uhci_hcd
[   12.948443] usb usb3: SerialNumber: 0000:00:1d.2
[   12.948805] hub 3-0:1.0: USB hub found
[   12.948831] hub 3-0:1.0: 2 ports detected
[   13.096580] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
[   13.096590] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[   13.096609] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[   13.096616] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff:
[   13.097659]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[   13.115963] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[   13.115971] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xdfffffff:
[   13.115976]  excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[   13.116040] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[   13.116047] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf7ffffff:
[   13.116065]  excluding 0xf0000000-0xf7ffffff
[   13.148523] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
[   13.148553] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[   13.148559] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[   13.148567] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
[   13.252132] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[   13.380849] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
[   13.380860] yenta_cardbus 0000:02:00.1: Socket status: 30000020
[   13.380877] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [io  0x4000-0x8fff]
[   13.380884] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff:
[   13.381840]  excluding 0x4000-0x40ff 0x4400-0x44ff 0x4800-0x48ff 0x4c00-0x4cff 0x8000-0x803f
[   13.399553] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xdfffffff]
[   13.399561] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xdfffffff:
[   13.399566]  excluding 0xd0200000-0xd09fffff 0xd3a00000-0xdc1fffff 0xdfa00000-0xe01fffff
[   13.399604] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf7ffffff pref]
[   13.399611] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0000000-0xf7ffffff:
[   13.399628]  excluding 0xf0000000-0xf7ffffff
[   13.424224] intel8x0_measure_ac97_clock: measured 55087 usecs (2648 samples)
[   13.424233] intel8x0: clocking to 48000
[   13.438525] usb 2-1: New USB device found, idVendor=1c4f, idProduct=0032
[   13.438536] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.438542] usb 2-1: Product: Usb Mouse
[   13.438547] usb 2-1: Manufacturer: SIGMACHIP
[   13.552136] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[   13.608800] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0, board id: 71, fw id: 4797594
[   13.608821] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   13.647728] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   13.704684] usb 2-2: New USB device found, idVendor=1a40, idProduct=0101
[   13.704694] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   13.704700] usb 2-2: Product: USB 2.0 Hub
[   13.706592] hub 2-2:1.0: USB hub found
[   13.708482] hub 2-2:1.0: 4 ports detected
[   14.267309] ppdev: user-space parallel port driver
[   14.296108] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[   14.296147] pci 0000:07:00.0: [168c:0013] type 00 class 0x020000
[   14.296205] pci 0000:07:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[   14.296469] pci 0000:07:00.0: BAR 0: assigned [mem 0xd8000000-0xd800ffff]
[   14.324951] iTCO_vendor_support: vendor-support=0
[   14.330450] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   14.330523] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[   14.335273] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.347029] systemd-udevd[207]: renamed network interface eth0 to enp2s8
[   14.457419] cfg80211: Calling CRDA to update world regulatory domain
[   14.508901] ath5k 0000:07:00.0: enabling device (0000 -> 0002)
[   14.509103] ath5k 0000:07:00.0: registered as 'phy0'
[   14.529797] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[   14.530541]  excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[   14.531098] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[   14.531368]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   14.531640] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[   14.532130]  clean.
[   14.541486] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   14.542238]  excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[   14.544685] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   14.544965]  excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   14.545260] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   14.545683]  clean.
[   14.545718] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   14.546185]  clean.
[   14.546228] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   14.546239]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   14.546287] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   14.546309]  clean.
[   14.546342] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   14.546362]  clean.
[   14.546396] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   14.546904]  clean.
[   14.558750] hidraw: raw HID events driver (C) Jiri Kosina
[   14.561039] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[   14.561664]  clean.
[   14.561721] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[   14.561732]  excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[   14.561781] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[   14.561802]  clean.
[   14.561836] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[   14.561856]  clean.
[   14.569853] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[   14.570379]  clean.
[   14.579494] usbcore: registered new interface driver usbhid
[   14.579503] usbhid: USB HID core driver
[   14.586082] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:1C4F:0032.0001/input/input10
[   14.587617] hid-generic 0003:1C4F:0032.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.1-1/input0
[   15.221597] ath: EEPROM regdomain: 0x80d0
[   15.221606] ath: EEPROM indicates we should expect a country code
[   15.221611] ath: doing EEPROM country->regdmn map search
[   15.221614] ath: country maps to regdmn code: 0x37
[   15.221619] ath: Country alpha2 being used: DK
[   15.221622] ath: Regpair used: 0x37
[   15.234831] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.235322] ath5k: phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
[   15.242233] systemd-udevd[212]: renamed network interface wlan0 to wlp7s0
[   15.620184] EXT4-fs (sda2): re-mounted. Opts: (null)
[   16.778792] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   16.970618] psmouse serio2: hgpk: ID: 10 00 64
[   18.329361] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   18.543987] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[   19.493065] Adding 2046972k swap on /dev/sda1.  Priority:-1 extents:1 across:2046972k FS
[   22.792505] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   25.092208] systemd-logind[396]: Watching system buttons on /dev/input/event3 (Power Button)
[   25.092469] systemd-logind[396]: Watching system buttons on /dev/input/event4 (Video Bus)
[   25.092683] systemd-logind[396]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   25.092889] systemd-logind[396]: Watching system buttons on /dev/input/event2 (Sleep Button)
[   25.093095] systemd-logind[396]: Watching system buttons on /dev/input/event6 (ThinkPad Extra Buttons)
[   26.201844] NET: Registered protocol family 10
[   39.448375] Bluetooth: Core ver 2.18
[   39.448426] NET: Registered protocol family 31
[   39.448430] Bluetooth: HCI device and connection manager initialized
[   39.448450] Bluetooth: HCI socket layer initialized
[   39.448457] Bluetooth: L2CAP socket layer initialized
[   39.448482] Bluetooth: SCO socket layer initialized
[   39.492085] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   39.492094] Bluetooth: BNEP filters: protocol multicast
[   39.492114] Bluetooth: BNEP socket layer initialized
[   39.645626] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   39.759771] NET: Registered protocol family 17
[   39.881868] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   41.060527] wlp7s0: authenticate with 22:15:af:7e:ba:90
[   41.067531] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[   41.068975] wlp7s0: authenticated
[   41.076115] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[   41.078524] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[   41.078676] wlp7s0: associated
[   41.078732] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[  176.832557] cfg80211: Calling CRDA for country: DK
[  177.597582] wlp7s0: authenticate with 22:15:af:7e:ba:90
[  177.597787] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[  177.704058] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[  177.808058] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[  177.912052] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[  184.737425] wlp7s0: authenticate with 22:15:af:7e:ba:90
[  184.737637] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[  184.840057] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[  184.944051] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[  185.048050] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[  186.709508] wlp7s0: authenticate with 22:15:af:7e:ba:90
[  186.709711] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[  186.711461] wlp7s0: authenticated
[  186.716131] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[  186.820061] wlp7s0: associate with 22:15:af:7e:ba:90 (try 2/3)
[  186.924052] wlp7s0: associate with 22:15:af:7e:ba:90 (try 3/3)
[  187.028050] wlp7s0: association with 22:15:af:7e:ba:90 timed out
[  196.898087] wlp7s0: authenticate with 22:15:af:7e:ba:90
[  196.898303] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[  197.004062] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[  197.108051] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[  197.212053] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[  207.882299] wlp7s0: authenticate with 22:15:af:7e:ba:90
[  207.882509] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[  207.988059] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[  208.092053] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[  208.196050] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[  224.236838] wlp7s0: authenticate with 22:15:af:7e:ba:90
[  224.237054] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[  224.238496] wlp7s0: authenticated
[  224.240110] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[  224.242511] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[  224.242679] wlp7s0: associated
[ 1005.014389] cfg80211: Calling CRDA for country: UA
[ 1011.441485] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1011.441689] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1011.544058] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1011.648057] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1011.752059] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1018.591138] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1018.591350] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1018.696102] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1018.800100] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1018.904059] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1026.115978] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1026.116270] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1026.220063] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1026.324049] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1026.428099] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1037.769655] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1037.769866] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1037.849079] wlp7s0: authenticated
[ 1037.852121] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[ 1037.854689] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[ 1037.854860] wlp7s0: associated
[ 1040.813383] wlp7s0: deauthenticating from 22:15:af:7e:ba:90 by local choice (reason=3)
[ 1040.813837] cfg80211: Calling CRDA to update world regulatory domain
[ 1043.613170] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 1044.986636] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1044.986834] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1045.024558] wlp7s0: authenticated
[ 1045.028077] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[ 1045.030498] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[ 1045.030645] wlp7s0: associated
[ 1045.030695] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 1205.015053] cfg80211: Calling CRDA for country: UA
[ 1205.817397] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1205.817591] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1205.920062] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1206.024127] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1206.128104] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1213.078232] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1213.078446] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1213.180104] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1213.284088] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1213.388107] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1231.648979] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 1231.959564] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 1234.051439] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1234.051651] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1234.080457] wlp7s0: authenticated
[ 1234.084128] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[ 1234.086571] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[ 1234.086721] wlp7s0: associated
[ 1234.086775] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 1237.491795] wlp7s0: deauthenticating from 22:15:af:7e:ba:90 by local choice (reason=3)
[ 1237.492314] cfg80211: Calling CRDA to update world regulatory domain
[ 1244.489969] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 1246.151425] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1246.151628] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1246.166294] wlp7s0: authenticated
[ 1246.168084] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[ 1246.170510] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[ 1246.170655] wlp7s0: associated
[ 1246.170714] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 1261.016233] cfg80211: Calling CRDA to update world regulatory domain
[ 1261.805449] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1261.805642] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1261.909259] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1262.012110] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1262.116079] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1268.985539] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1268.985743] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1269.088103] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1269.192104] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1269.296060] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1289.654446] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 1291.096381] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1291.096583] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1291.200247] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1291.304101] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 3/3)
[ 1291.408073] wlp7s0: authentication with 22:15:af:7e:ba:90 timed out
[ 1297.911133] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1297.911342] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1298.016095] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1298.118189] wlp7s0: authenticated
[ 1298.120493] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[ 1298.122999] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[ 1298.123164] wlp7s0: associated
[ 1298.123238] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 1639.018552] cfg80211: Calling CRDA for country: UA
[ 1645.445488] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1645.445691] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1645.548095] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3)
[ 1645.616725] wlp7s0: authenticated
[ 1645.620098] wlp7s0: associate with 22:15:af:7e:ba:90 (try 1/3)
[ 1645.631613] wlp7s0: RX AssocResp from 22:15:af:7e:ba:90 (capab=0x431 status=0 aid=1)
[ 1645.631778] wlp7s0: associated
[vadimcucherencko@comp-pentium-4-30c642 ~]

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 361
  • Учиться .... Телепатами не рождаются, ими ....
Как не рабочая - вы не ссылку жмите, а текст копируйте :)

Оффлайн ruslandh

  • Поспешай не торопясь !
  • Модератор глобальный
  • *****
  • Сообщений: 32 361
  • Учиться .... Телепатами не рождаются, ими ....
А что он у вас орять по ipv6 пытается соединиться?

[1261.805449] wlp7s0: authenticate with 22:15:af:7e:ba:90
[ 1261.805642] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 1/3)
[ 1261.909259] wlp7s0: send auth to 22:15:af:7e:ba:90 (try 2/3

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
Незнаю в нетворк менеджере стоит на игнорировать.

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
попробую таким способом
Откроем файл /etc/sysctl.conf для редактирования и  добавим следующие строки в него

# IPv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1

Сохраняем файл.

Теперь говорим системе перечитать конфиг sysctl.conf с нашими новыми параметрами:

sysctl -p

Теперь в вашей системе отключено ipv6

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
только не удается добавить строки через vim и ipv6 всёравно остаётся включенным

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
все отключил способом от  сюда http://www.altlinux.org/Etcnet#.D0.9E.D1.82.D0.BA.D0.BB.D1.8E.D1.87.D0.B5.D0.BD.D0.B8.D0.B5_IPv6 теперь посмотрю
 

Оффлайн vadimcucherencko

  • Участник
  • *
  • Сообщений: 64
всё равно отваливается вай фай, так что ipv6 не из этой пьессы, нужно копать в другом направлении.