X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: ALT Linux p6 (Ziziphora) i686
Current Operating System: Linux comp-atom-cpu-02fbbe.localdomain 3.0.3-std-def-alt0.M60P.1 #1 SMP Sat Aug 20 17:18:54 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=42b6037c-60ae-489f-b459-da9391e6ceae ro quiet=1 resume=/dev/disk/by-uuid/2e1b76ac-d5a4-4d50-bf64-b932cd3427e1 panic=30 splash
Build Date: 13 July 2011 03:39:43PM
Current version of pixman: 0.22.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 1 21:26:14 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d
(==) ModulePath set to "/usr/lib/X11/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81fbda0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 10.0
X.Org XInput driver : 12.2
X.Org Server Extension : 5.0
(--) PCI:*(0:0:2:0) 8086:a001:8086:4f4d rev 2, Mem @ 0xe0200000/524288, 0xd0000000/268435456, 0xe0100000/1048576, I/O @ 0x000020c0/8
(==) Matched intel as autoconfigured driver 0
(==) Matched fbdev as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) Executed /usr/libexec/X11/drv.d/x11
(II) LoadModule: "extmod"
(II) Loading /usr/lib/X11/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/X11/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/X11/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 5.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/X11/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/X11/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/X11/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.2.0
ABI class: X.Org Server Extension, version 5.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/X11/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.10.1, module version = 2.15.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 10.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/X11/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.10.1, module version = 0.4.2
ABI class: X.Org Video Driver, version 10.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/X11/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.10.1, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 10.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(++) using VT number 7
(II) Loading /usr/lib/X11/modules/drivers/intel_drv.so
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/X11/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 0.0.2
ABI class: X.Org Video Driver, version 10.0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
(--) intel(0): Chipset: "Pineview G"
(**) intel(0): Relaxed fencing enabled
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): 3D buffers tiled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x58.1 68.90 1280 1292 1340 1440 800 804 807 823 -hsync -vsync (47.8 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Output VGA1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/X11/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Loading /usr/lib/X11/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.10.3, module version = 1.2.0
ABI class: X.Org Server Extension, version 5.0
(II) UnloadModule: "fbdev"
(II) Unloading fbdev
(II) UnloadModule: "fbdevhw"
(II) Unloading fbdevhw
(II) UnloadModule: "vesa"
(II) Unloading vesa
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2] DRI driver: i915
(II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled on system
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/X11/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.10.1, module version = 2.6.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 12.2
(II) Using input driver 'evdev' for 'Power Button'
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(--) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event0"
(--) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event4)
(**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Genius Optical Mouse'
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(**) Genius Optical Mouse: always reports core events
(**) Genius Optical Mouse: Device: "/dev/input/event4"
(--) Genius Optical Mouse: Found 3 mouse buttons
(--) Genius Optical Mouse: Found scroll wheel(s)
(--) Genius Optical Mouse: Found relative axes
(--) Genius Optical Mouse: Found x and y relative axes
(II) Genius Optical Mouse: Configuring as mouse
(II) Genius Optical Mouse: Adding scrollwheel support
(**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input4/event4"
(II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE)
(II) Genius Optical Mouse: initialized for relative axes.
(**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
(**) Genius Optical Mouse: (accel) acceleration profile 0
(**) Genius Optical Mouse: (accel) acceleration factor: 2.000
(**) Genius Optical Mouse: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event5)
(**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Chicony USB Keyboard: Applying InputClass "keyboard"
(II) Using input driver 'evdev' for 'Chicony USB Keyboard'
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event5"
(--) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input5/event5"
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Chicony USB Keyboard (/dev/input/event6)
(**) Chicony USB Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Chicony USB Keyboard'
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event6"
(--) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input6/event6"
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
